| Axles |
|
Type (1) |
Trunnion mounted planetary 55 degree steer axles. |
|
Type (2) |
High bias limited slip differential on front axle. |
| Boom Performance |
|
Boom Down |
10.3 s |
|
Boom Up |
15 s |
|
Tele In |
9.5 s |
|
Tele Out |
16.3 s |
| Brakes |
|
Parking Brakes |
Wet disc, spring applied hydraulic release on front axle |
|
Service Brakes |
Inboard wet disc brakes on front and rear axles |
| Engine |
|
Engine Model |
Cat C3.4B |
|
Gross Power - Basic |
100 hp (75 kw)
|
|
Note |
Meets U.S. EPA Tier 4 Final emission standards. |
| Hydraulic System |
|
Auxiliary Hydraulic Flow |
18 gpm (68 lpm)
|
|
Auxiliary Hydraulic Pressure |
3,481 psi |
|
Gear Pump |
Single-section |
|
Note |
Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
|
System Operating Pressure |
3,770 psi |
| Operating Specifications |
|
Capacity At Maximum Height |
6,500 lbs (2,948 kg)
|
|
Capacity At Maximum Reach |
700 lbs (318 kg)
|
|
Drawbar Pull - Loaded |
19,783 lbs ft (26,822 nm)
|
|
Frame Leveling |
10 degrees |
|
Maximum Forward Reach |
30 ft (9 m)
|
|
Maximum Lift Height |
42 ft (13 m)
|
|
Rated Load Capacity |
6,500 lbs (2,948 kg)
|
|
Top Travel Speed |
21 mph (34 kph)
|
|
Turning Radius - Over Tires |
12 ft (4 m)
|
| Operational |
|
Operating Weight |
22,002 lbs (9,980 kg)
|
| Service Refill Capacities |
|
Diesel Exhaust Fluid (Def) Tank |
6 gal (22 l)
|
|
Fuel Tank |
38 gal (145 l)
|
|
Hydraulic System |
40 gal (151 l)
|
| Tires |
|
Optional (1) |
370/75-28 Foam Duraforce |
|
Optional (2) |
13.00 24-16 PR Air |
|
Optional (3) |
13.00 24-12 PR Foam Filled |
|
Optional (4) |
13.00 24 Solid |
|
Standard |
370/75-28 Air Duraforce |
| Transmission Speeds |
|
Forward |
4 speed |
|
Reverse |
3 speed |
| Work Tools |
|
Carriages - Dual Fork Positioning |
50 in (127 cm)
|
|
Carriages - Side Shift |
48 in (122 cm)
|
|
Carriages - Standard Rotate |
50 in (127 cm)
|
|
Carriages - Standard Tilt |
50 in (127 cm)
|
|
Carriages - Swing |
100 degrees, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
|
Carriages - Wide Rotate |
72 in (183 cm)
|
|
Carriages - Wide Tilt |
72 in (183 cm)
|
|
Cubing Forks |
[2] 1220 mm, 50 mm 50 mm ([2] 48 in, 2 in 2 in) |
|
Hydraulic It Coupler |
Includes Auxiliary Electrics |
|
Lumber Forks - Option 1 |
[2] 1525 mm, 45 mm 180 mm ([2] 60 in, 1.75 in 7 in) |
|
Lumber Forks - Option 2 |
[2] 1829 mm, 50 mm 150 mm ([2] 72 in, 2 in 6 in) |
|
Pallet Forks - Option 1 |
[2] 1220 mm, 60 mm 125 mm ([2] 48 in, 2.36 in 5 in) |
|
Pallet Forks - Option 2 |
[2] 1220 mm, 60 mm 100 mm ([2] 48 in, 2.36 in 4 in) |
|
Pallet Forks - Option 3 |
[2] 1525 mm, 60 mm 150 mm ([2] 60 in, 2.36 in 6 in) |
