Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $28,000.00 USD
Apply for Financing| Serial Number: | MW400209 |
| Stock Number: | 46680 |
| Machine Location: | MANHEIM, PA |
Supplied by HeavyEquipmentData.com →
| Bucket | |
| Breakout Force | 5,171 lbs (2,346 kg) |
| Bucket Width | 6 ft (2 m) |
| Dump Clearance At Max Raise | 3 ft (1 m) |
| Buckets | |
| Bucket Capacities | 0.6-1.0 m3 (0.8-1.3 yd3) |
| Cab | |
| Fops | ISO 3449:2000 Level I |
| Rops | ISO 3471:2008 |
| Dimensions | |
| Ground Clearance | 1 ft (0 m) |
| Height | 8 ft (3 m) |
| Height To Top Of Cab | 8 ft (3 m) |
| Hinge Pin - Max Height | 11 ft (3 m) |
| Length | 16 ft (5 m) |
| Length With Bucket On Ground | 16 ft (5 m) |
| Reach At Max Lift And Dump | 3 ft (1 m) |
| Weight | 9,150 lbs (4,150 kg) |
| Wheelbase | 6 ft (2 m) |
| Width | 6 ft (2 m) |
| Dimensions (Approximate) | |
| Articulation Angle | 40 |
| Cab Height | 8 ft (3 m) |
| Departure Angle | 30 |
| Dig Depth | 8 in (20 cm) |
| Dump Angle At Maximum Height | 40 |
| Fork Depth Above Ground | 2 in (5 cm) |
| Fork Height At Maximum Reach | 5 ft (1 m) |
| Fork Reach At Maximum Height | 3 ft (1 m) |
| Ground Clearance | 1 ft (0 m) |
| Hinge Pin At Maximum Height | 11 ft (3 m) |
| Load Over Height | 10 ft (3 m) |
| Machine Width - 12-16.5 10pr Tires | 5 ft (2 m) |
| Machine Width - Flexport 33 6 11 Tires | 5 ft (2 m) |
| Machine Width - Flotation 33-15.5 16.5 Tires | 6 ft (2 m) |
| Maximum Dump Height | 8 ft (2 m) |
| Maximum Fork Height | 10 ft (3 m) |
| Maximum Reach | 5 ft (2 m) |
| Overall Length - With Bucket | 16 ft (5 m) |
| Overall Length - With Forks | 17 ft (5 m) |
| Reach - Ground Level | 4 ft (1 m) |
| Reach At Maximum Dump Height | 3 ft (1 m) |
| Steering Angle - Left/Right | 80 |
| Tire Gauge | 4 ft (1 m) |
| Turning Radius - Inside Tire | 5 ft (2 m) |
| Turning Radius - Over Bucket | 13 ft (4 m) |
| Wheel Base | 6 ft (2 m) |
| Width - Over Bucket | 6 ft (2 m) |
| Engine | |
| Aspiration | Turbocharged |
| Bore | 3 in (9 cm) |
| Displacement | 147 cu in (2,409 cu cm) |
| Engine Make | 2,236 |
| Engine Model | Cat C2.4* |
| Gross Power | 42 hp (31 kw) |
| Net Power | 40 hp (30 kw) |
| Net Power - 2,200 Rpm - Eec 80/1269 Rating | 40 hp (30 kw) |
| Net Power - 2,200 Rpm - Iso 9249 Rating | 40 hp (30 kw) |
| Net Power - 2,200 Rpm - Sae J1349 Rating | 40 hp (30 kw) |
| Note | *Engine meets U.S. EPA Tier 4 Interim emission standards. |
| Stroke | 4 in (10 cm) |
| General Specifications | |
| A Cab height (Since 2016) | 99 in (2,510 mm) |
| Approx. Shipping Wt. (Since 2014) | 9,500 lbs (4,300 kg) |
| B Ground clearance (Since 2016) | 16 in (395 mm) |
| Bore (Since 2016) | 3 in (87 mm) |
| Breakout Force (Since 2014) | 5,171 lbf (2,345 kgf) |
| C Wheelbase (Since 2016) | 71 in (1,800 mm) |
| Displacement (Since 2016) | 147 cu in (2 L) |
| Dump (Since 2016) | 1 |
| Dump Clearance at max. height (Since 2014) | 96 in (2 m) |
| Engine Model (Since 2016) | C2.4* |
| Flywheel Horse- power (Since 2014) | 42 hp (31 kw) |
| Flywheel Power: Gross (Since 2016) | 42 hp (31 kW) |
| Flywheel Power: Net (Since 2016) | 40 hp (30 kW) |
| Forward Speed (Since 2016) | 10 mph (16 km/h) |
| Fuel Tank Capacity (Since 2016) | 11 US gal (43 L) |
| Ground Clearance (Since 2014) | 16 in (395 mm) |
| Hydraulic System Capacity (includes tank) (Since 2016) | 6 US gal (24 L) |
| Lower (Since 2016) | 3 |
| Max. Reach at max. height (Since 2014) | 35 in (885 mm) |
| Maximum Forward Speed (Since 2014) | 10 mph (16 km/h) |
| Maximum Reverse Speed (Since 2014) | 10 mph (16 km/h) |
| No. Cylinders (Since 2016) | 4 |
| Product Identification Prefix (Since 2014) | MW4 |
| Raise (Since 2016) | 5 |
| Rated Capacity (Since 2014) | 1 cu yd (1 cu m) |
| Rated Engine RPM (Since 2016) | 2,200 rpm |
| Stroke (Since 2016) | 4 in (102 mm) |
| Total (Since 2016) | 9 |
| Tread Width (Since 2016) | 52 in (1,314 mm) |
| Width Over Tires (Since 2014) | 67 in (2 m) |
| Hydraulic System | |
| 3rd Auxiliary Flow | 14 gpm (53 lpm) |
| Dump Time | 1 sec |
| Hydraulic Cycle Time - Dump | 0.8 s |
| Hydraulic Cycle Time - Lift | 4.7 s |
| Hydraulic Cycle Time - Lower, Float | 3.1 s |
| Lower Time | 3 sec |
| Main Relief | 2,988 psi |
| Pump Flow Capacity | 14 gpm (53 lpm) |
| Raise Time | 5 sec |
| Relief Valve Setting | 2,988 psi |
| Maximum Material Densities | |
| General Purpose - Bucket Type | General Purpose |
| General Purpose - Bucket Width | 70 in (178 cm) |
| General Purpose - Dump Height | 96 in (244 cm) |
| General Purpose - Maximum Material Density | 2437 lb/yd |
| General Purpose - Rated Capacity | 1 cu yd |
| Light Material - Bucket Type | Light Material |
| Light Material - Bucket Width | 74 in (188 cm) |
| Light Material - Dump Height | 91 in (231 cm) |
| Light Material - Maximum Material Density | 1423 lb/yd |
| Light Material - Rated Capacity | 1 cu yd |
| Note | Based on ISO 7546: 1983 and rated operating loads at full turn and without additional counterweight |
| Operating Specifications | |
| Breakout Force | 5,171 lbs (2,346 kg) |
| Rated Bucket Capacity | 1 cu yd |
| Standard - Full Turn Static Tipping Load, Bucket | 3,900 lbs (1,769 kg) |
| Standard - Operating Weight | 9,150 lbs (4,150 kg) |
| Standard - Rackback, Transport Position | 52 |
| Standard - Rated Operating Load At Full Turn - Bucket | 1,950 lbs (885 kg) |
| Standard - Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm (20 In) Load Center) (80% Of Ftstl) | 2,500 lbs (1,134 kg) |
| Standard - Rated Operating Load At Full Turn - Forks (En 474-3:2006, Rough Terrain, 500 Mm (20 In) Load Center) (60% Of Ftstl) | 1,900 lbs (862 kg) |
| Standard - Straight Tipping Load, Bucket | 4,650 lbs (2,109 kg) |
| Tire Size | 33 15.5-16.5, 12PR |
| With Additional Counterweight - Full Turn Static Tipping Load - Bucket | 4,200 lbs (1,905 kg) |
| With Additional Counterweight - Operating Weight | 9,500 lbs (4,309 kg) |
| With Additional Counterweight - Rackback - Transport Position | 52 |
| With Additional Counterweight - Rated Operating Load At Full Turn - Bucket | 2,100 lbs (953 kg) |
| With Additional Counterweight - Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm (20 In) Load Center) (80% Of Ftstl) | 2,700 lbs (1,225 kg) |
| With Additional Counterweight - Rated Operating Load At Full Turn - Forks (En 474-3:2006, Rough Terrain, 500 Mm (20 In) Load Center) (60% Of Ftstl) | 2,000 lbs (907 kg) |
| With Additional Counterweight - Straight Tipping Load - Bucket | 5,000 lbs (2,268 kg) |
| Operational | |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 3 gal (11 l) |
| Engine Oil Fluid Capacity | 2 gal (9 l) |
| Fuel Capacity | 11 gal (43 l) |
| Hydraulic System Fluid Capacity | 6 gal (24 l) |
| Operating Voltage | 12 V |
| Operating Weight | 9,150 lbs (4,150 kg) |
| Static Tipping Weight | 3,900 lbs (1,769 kg) |
| Tire Size | 15.5-16.5 |
| Service Refill Capacities | |
| Cooling System | 3 gal (11 l) |
| Engine Oil | 2 gal (9 l) |
| Fuel Tank | 11 gal (43 l) |
| Hydraulic System | 6 gal (24 l) |
| Transmission | |
| Travel Speed | 10 mph (16 kph) |
| Weights | |
| Operating Weight | 9,150 lbs (4,150 kg) |
| Years Of Manufacture | |
| Approximate First Year Of Manufacture | 2014 A.D. |