| Buckets |
|
Bucket Capacities (Since 2026)
|
0.6-1 m3 (0.8-1.3 yd3) |
|
Bucket Capacities - General Purpose (Since 2026)
|
0.6 m3 (0.8 yd3) |
|
Bucket Capacities - Light Material (Since 2026)
|
1 m3 (1.3 yd3) |
| Cab |
|
FOPS (Since 2026)
|
ISO 3449:2005 Level I |
|
ROPS (Since 2026)
|
ISO 3471:2008 |
| Dimensions |
|
Height |
8 ft (3 m)
|
|
Length |
16 ft (5 m)
|
|
Weight |
9,414 lbs (4,270 kg)
|
|
Width |
6 ft (2 m)
|
| Dimensions (Approximate) - High Lift |
|
Articulation Angle (Since 2026)
|
40 degrees |
|
Cab Height (Since 2026)
|
8 ft (3 m)
|
|
Departure Angle - Degrees (Since 2026)
|
30 degrees |
|
Dig Depth (Since 2026)
|
8 in (20 cm)
|
|
Dump Angle at Maximum Height (Since 2026)
|
40 degrees |
|
Fork Depth Above Ground (Since 2026)
|
2 in (5 cm)
|
|
Fork Height at Maximum Reach (Since 2026)
|
5 ft (1 m)
|
|
Fork Reach at Maximum Height (Since 2026)
|
2 ft (1 m)
|
|
Ground Clearance (Since 2026)
|
10 in (25 cm)
|
|
Hinge Pin at Maximum Height (Since 2026)
|
11 ft (3 m)
|
|
Load Over Height (Since 2026)
|
10 ft (3 m)
|
|
Machine Width** (Since 2026)
|
6 ft (2 m)
|
|
Maximum Dump Height* (Since 2026)
|
8 ft (2 m)
|
|
Maximum Fork Height (Since 2026)
|
10 ft (3 m)
|
|
Maximum Reach (Since 2026)
|
5 ft (2 m)
|
|
Overall Length - With Bucket* (Since 2026)
|
16 ft (5 m)
|
|
Overall Length - With Forks (Since 2026)
|
18 ft (5 m)
|
|
Reach - Ground Level (Since 2026)
|
3 ft (1 m)
|
|
Reach at Maximum Dump Height* (Since 2026)
|
2 ft (1 m)
|
|
Steering Angle (Since 2026)
|
80 degrees |
|
Tire Gauge (Since 2026)
|
4 ft (1 m)
|
|
Turning Radius - Inside Tire** (Since 2026)
|
6 ft (2 m)
|
|
Turning Radius - Over Bucket* (Since 2026)
|
13 ft (4 m)
|
|
Wheel Base (Since 2026)
|
6 ft (2 m)
|
|
Width - Over Bucket* (Since 2026)
|
6 ft (2 m)
|
| Dimensions (Approximate) - Standard Lift |
|
Articulation Angle (Since 2026)
|
40 degrees |
|
Cab Height (Since 2026)
|
8 ft (3 m)
|
|
Departure Angle - Degrees (Since 2026)
|
30 degrees |
|
Dig Depth (Since 2026)
|
6 in (15 cm)
|
|
Dump Angle at Maximum Height (Since 2026)
|
40 degrees |
|
Fork Depth Above Ground (Since 2026)
|
2 in (5 cm)
|
|
Fork Height at Maximum Reach (Since 2026)
|
5 ft (1 m)
|
|
Fork Reach at Maximum Height (Since 2026)
|
2 ft (1 m)
|
|
Ground Clearance (Since 2026)
|
10 in (25 cm)
|
|
Hinge Pin at Maximum Height (Since 2026)
|
10 ft (3 m)
|
|
Load Over Height (Since 2026)
|
9 ft (3 m)
|
|
Machine Width** (Since 2026)
|
6 ft (2 m)
|
|
Maximum Dump Height* (Since 2026)
|
8 ft (2 m)
|
|
Maximum Fork Height (Since 2026)
|
10 ft (3 m)
|
|
Maximum Reach (Since 2026)
|
5 ft (1 m)
|
|
Overall Length - With Bucket* (Since 2026)
|
16 ft (5 m)
|
|
Overall Length - With Forks (Since 2026)
|
17 ft (5 m)
|
|
Reach - Ground Level (Since 2026)
|
3 ft (1 m)
|
|
Reach at Maximum Dump Height* (Since 2026)
|
2 ft (1 m)
|
|
Steering Angle (Since 2026)
|
80 degrees |
|
Tire Gauge (Since 2026)
|
4 ft (1 m)
|
|
Turning Radius - Inside Tire** (Since 2026)
|
6 ft (2 m)
|
|
Turning Radius - Over Bucket* (Since 2026)
|
13 ft (4 m)
|
|
Wheel Base (Since 2026)
|
6 ft (2 m)
|
|
Width - Over Bucket* (Since 2026)
|
6 ft (2 m)
|
| Engine |
|
Bore (Since 2026)
|
3 in (9 cm)
|
|
Displacement (Since 2026)
|
147 in² |
|
Engine Model (Since 2026)
|
Cat C2.4* |
|
Gross Power (Since 2026)
|
42 hp (31 kw)
|
|
Maximum Gross Power (Since 2026)
|
42 hp (31 kw)
|
|
Net Power - 2,200 rpm - ISO 9249 R-ing (Since 2026)
|
40 hp (30 kw)
|
|
Net Power - 2,200 rpm - SAE J1349 R-ing (Since 2026)
|
40 hp (30 kw)
|
|
Stroke (Since 2026)
|
4 in (10 cm)
|
| General Specifications |
|
Bucket Capacity (Since 2019)
|
0.8 - 1.3 (0.6 - 1.0) |
|
Bucket Capacity (2020)
|
0.8 - 1.3 (0.6 - 1.0) |
|
Bucket Capacity (2021)
|
0.8 - 1.3 (0.6 - 1.0) |
|
Bucket Capacity (2022)
|
0.8 - 1.3 (0.6 - 1.0) |
|
Bucket Capacity (2023)
|
0.8 - 1.3 (0.6 - 1.0) |
|
Engine Power (Since 2019)
|
42 hp (31 kw)
|
|
Engine Power (2020)
|
42 hp (31 kw)
|
|
Engine Power (Since 2021)
|
74 hp (55 kw)
|
|
Engine Power (2022)
|
74 hp (55 kw)
|
|
Engine Power (2023)
|
74 hp (55 kw)
|
|
Engine type (Since 2019)
|
Cat C2.4 |
|
Engine type (2020)
|
Cat C2.4 |
|
Engine type (2021)
|
Cat C2.4 |
|
Engine type (2022)
|
Cat C2.4 |
|
Engine type (2023)
|
Cat C2.4 |
|
Max Dump Height (Since 2019)
|
8 ft (2 m)
|
|
Max Dump Height (2020)
|
8 ft (2 m)
|
|
Operating Weight (Since 2019)
|
9,414 lbs (4,270 kg)
|
|
Operating Weight (2020)
|
9,414 lbs (4,270 kg)
|
|
Operating Weight (Since 2021)
|
9,392 lbs (4,260 kg)
|
|
Operating Weight (2022)
|
9,392 lbs (4,260 kg)
|
|
Operating Weight (2023)
|
9,392 lbs (4,260 kg)
|
|
Tip Load (Since 2021)
|
5,070 lbs (2,300 kg)
|
|
Tip Load (2022)
|
5,070 lbs (2,300 kg)
|
|
Tip Load (2023)
|
5,070 lbs (2,300 kg)
|
|
Travel Speed(Fwd/Rev) (Since 2021)
|
10 mph |
|
Travel Speed(Fwd/Rev) (2022)
|
10 mph |
|
Travel Speed(Fwd/Rev) (2023)
|
10 mph |
| Hydraulic System |
|
3rd Auxiliary Flow (Since 2026)
|
14 gpm (53 lpm)
|
|
Hydraulic Cycle Time - Lower, Float (Since 2026)
|
2 s |
|
Main Relief (Since 2026)
|
3,481 psi |
| Loader Hydraulic System |
|
Hydraulic Cycle Time - Dump (Since 2026)
|
1 s |
|
Hydraulic Cycle Time - Lift (Since 2026)
|
4 s |
| Maximum Material Densities - General Purpose |
|
Bucket Type (Since 2026)
|
General Purpose |
|
Bucket Width (Since 2026)
|
70 in (178 cm)
|
|
Dump Height (Since 2026)
|
90 in (229 cm)
|
|
Maximum Material Density (Since 2026)
|
3169 lb/yd³ |
|
Rated Capacity (Since 2026)
|
1 cu yd |
| Maximum Material Densities - Light Material |
|
Bucket Type (Since 2026)
|
Light Material |
|
Bucket Width (Since 2026)
|
74 in (188 cm)
|
|
Dump Height (Since 2026)
|
85 in (216 cm)
|
|
Maximum Material Density (Since 2026)
|
1989 lb/yd³ |
|
Rated Capacity (Since 2026)
|
1 cu yd |
| Operating Specifications - High Lift |
|
Breakout Force (Since 2026)
|
6,204 lbs ft (8,411 nm)
|
|
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** (Since 2026)
|
5,004 lbs (2,270 kg)
|
|
Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** (Since 2026)
|
5,115 lbs (2,320 kg)
|
|
Operating Weight (Since 2026)
|
9,462 lbs (4,292 kg)
|
|
Rack Back - Transport Position (Since 2026)
|
51 degrees |
|
Rated Bucket Capacity (Since 2026)
|
1 cu yd |
|
Rated Operating Load at Full Turn - Bucket*** (Since 2026)
|
2,502 lbs (1,135 kg)
|
|
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** (Since 2026)
|
3,148 lbs (1,428 kg)
|
|
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** (Since 2026)
|
2,361 lbs (1,071 kg)
|
|
Straight Tipping Load - Bucket*** (Since 2026)
|
5,975 lbs (2,710 kg)
|
|
Tire Size (Since 2026)
|
33 × 15.5-16.5, 12 PR |
| Operating Specifications - Standard Lift |
|
Breakout Force (Since 2026)
|
6,160 lbs ft (8,352 nm)
|
|
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** (Since 2026)
|
5,401 lbs (2,450 kg)
|
|
Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** (Since 2026)
|
5,512 lbs (2,500 kg)
|
|
Operating Weight (Since 2026)
|
9,414 lbs (4,270 kg)
|
|
Rack Back - Transport Position (Since 2026)
|
51 degrees |
|
Rated Bucket Capacity (Since 2026)
|
1 cu yd |
|
Rated Operating Load at Full Turn - Bucket*** (Since 2026)
|
2,701 lbs (1,225 kg)
|
|
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** (Since 2026)
|
3,366 lbs (1,527 kg)
|
|
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** (Since 2026)
|
2,524 lbs (1,145 kg)
|
|
Straight Tipping Load - Bucket*** (Since 2026)
|
6,415 lbs (2,910 kg)
|
|
Tire Size (Since 2026)
|
33 × 15.5-16.5, 12 PR |
| Service Refill Capacities |
|
Cooling System (Since 2026)
|
3 gal (11 l)
|
|
Engine Oil (Since 2026)
|
2 gal (9 l)
|
|
Fuel Tank (Since 2026)
|
11 gal (43 l)
|
|
Hydraulic System (Since 2026)
|
6 gal (24 l)
|
| Sustainability |
|
Recyclability (Since 2026)
|
97% |
| Transmission |
|
Travel Speed (Since 2026)
|
12 mph (20 kph)
|
| Weights |
|
Operating Weight (Since 2026)
|
9,414 lbs (4,270 kg)
|
