| Axles |
|
Front (Since 2026)
|
Fixed (standard) Locking Differential (optional) |
|
Rear (Since 2026)
|
Fixed (standard) Locking Differential (optional) |
| Buckets |
|
Bucket Capacities (Since 2026)
|
0.75-1.55 m³ (1.0-2 yd³) |
|
Bucket Capacities - General Purpose (Since 2026)
|
0.80-1.35 m³ (1.0-1.7 yd³) |
|
Bucket Capacities - Light Material (Since 2026)
|
1.25-1.55 m³ (1.6-2 yd³) |
|
Multi-Purpose (Since 2026)
|
0.75-1.1 m³ (1.0-1.4 yd³) |
| Cab |
|
FOPS (Since 2026)
|
ISO 3449:2005 Level II |
|
ROPS (Since 2026)
|
ISO 3471:2008 |
| Dimensions |
|
Height |
9 ft (3 m)
|
|
Length |
16 ft (5 m)
|
|
Weight |
11,310 lbs (5,130 kg)
|
|
Width |
6 ft (2 m)
|
| Dimensions - With Hpl-V Coupler - Approximate# |
|
80% of Tip: Firm and Level EN474-3 †† (Since 2026)
|
5,211 lbs (2,364 kg)
|
|
Articulation Angle - Degrees (Since 2026)
|
39 degrees |
|
Carry Height: Bucket Pin (Since 2026)
|
1 ft (0 m)
|
|
Clearance: Bucket at 45° * (Since 2026)
|
8 ft (3 m)
|
|
Clearance: Level Bucket** (Since 2026)
|
10 ft (3 m)
|
|
Clearance: Load over Height** (Since 2026)
|
10 ft (3 m)
|
|
Departure Angle - Degrees (Since 2026)
|
30 degrees |
|
Dig Depth** (Since 2026)
|
0 ft (0 m)
|
|
Dump Angle at Full Lift (Since 2026)
|
45 degrees |
|
Height: Bucket Pin** (Since 2026)
|
11 ft (3 m)
|
|
Height: Ground Axle Center** (Since 2026)
|
2 ft (0 m)
|
|
Height: Ground Clearance** (Since 2026)
|
1 ft (0 m)
|
|
Height: Ground to Beacon** (Since 2026)
|
9 ft (3 m)
|
|
Height: Ground to Cab** (Since 2026)
|
8 ft (2 m)
|
|
Height: Overall** (Since 2026)
|
14 ft (4 m)
|
|
Length: Front Axle to Front of Coupler (Since 2026)
|
4 ft (1 m)
|
|
Length: Hitch to Front Axle (Since 2026)
|
4 ft (1 m)
|
|
Length: Overall* (Since 2026)
|
18 ft (5 m)
|
|
Length: Rear Axle to Bumper (Since 2026)
|
5 ft (1 m)
|
|
Length: Wheel Base (Since 2026)
|
7 ft (2 m)
|
|
Operating Weight: Bucket ^ (Since 2026)
|
12,632 lbs (5,730 kg)
|
|
Operating Weight: Carriage and Tines ^^ (Since 2026)
|
12,240 lbs (5,552 kg)
|
|
Rack Angle at Carry (Since 2026)
|
51 degrees |
|
Rack Angle at Full Lift (Since 2026)
|
56 degrees |
|
Reach: Bucket at 45° * (Since 2026)
|
2 ft (1 m)
|
|
Tipping Load - Full Turn - ISO 14397-1 † (Since 2026)
|
8,225 lbs (3,731 kg)
|
|
Tipping Load - Full Turn † (Since 2026)
|
6,514 lbs (2,955 kg)
|
|
Tipping Load - Straight - ISO 14397-1 † (Since 2026)
|
9,760 lbs (4,427 kg)
|
|
Tipping Load - Straight † (Since 2026)
|
7,748 lbs (3,514 kg)
|
|
Turning Radius: Inside of Tires (Since 2026)
|
7 ft (2 m)
|
|
Turning Radius: Outside of Tires (Since 2026)
|
13 ft (4 m)
|
|
Turning Radius: Over Bucket (Since 2026)
|
14 ft (4 m)
|
|
Width: Bucket (Since 2026)
|
6 ft (2 m)
|
|
Width: Over Tires (Since 2026)
|
6 ft (2 m)
|
|
Width: Tread Center (Since 2026)
|
5 ft (1 m)
|
| Dimensions - With Ssl Coupler - Approximate |
|
80% of Tip: Firm and Level EN474-3 †† (Since 2026)
|
4,970 lbs (2,254 kg)
|
|
Articulation Angle - Degrees (Since 2026)
|
39 degrees |
|
Carry Height: Bucket Pin (Since 2026)
|
1 ft (0 m)
|
|
Clearance - Bucket at 45° (Since 2026)
|
8 ft (2 m)
|
|
Clearance - Level Bucket (Since 2026)
|
10 ft (3 m)
|
|
Clearance: Load over Height** (Since 2026)
|
10 ft (3 m)
|
|
Departure Angle - Degrees (Since 2026)
|
30 degrees |
|
Dig Depth (Since 2026)
|
0 ft (0 m)
|
|
Dump Angle at Full Lift (Since 2026)
|
50 degrees |
|
Height - Bucket Pin (Since 2026)
|
11 ft (3 m)
|
|
Height - Ground Clearance (Since 2026)
|
1 ft (0 m)
|
|
Height - Ground to Cab (Since 2026)
|
8 ft (2 m)
|
|
Height: Ground Axle Center** (Since 2026)
|
2 ft (0 m)
|
|
Height: Ground to Beacon** (Since 2026)
|
9 ft (3 m)
|
|
Height: Overall** (Since 2026)
|
14 ft (4 m)
|
|
Length - Overall with Bucket (Since 2026)
|
18 ft (6 m)
|
|
Length - Wheel Base (Since 2026)
|
7 ft (2 m)
|
|
Length: Front Axle to Front of Coupler (Since 2026)
|
4 ft (1 m)
|
|
Length: Hitch to Front Axle (Since 2026)
|
4 ft (1 m)
|
|
Length: Rear Axle to Bumper (Since 2026)
|
5 ft (1 m)
|
|
Operating Weight: Bucket ^ (Since 2026)
|
12,863 lbs (5,835 kg)
|
|
Operating Weight: Carriage and Tines ^^ (Since 2026)
|
12,434 lbs (5,640 kg)
|
|
Rack Angle at Carry (Since 2026)
|
46 degrees |
|
Rack Angle at Full Lift (Since 2026)
|
51 degrees |
|
Reach - Bucket at 45° (Since 2026)
|
3 ft (1 m)
|
|
Tipping Load - Full Turn † (Since 2026)
|
2,818 kg (6,213 lbs)
|
|
Tipping Load - Straight † (Since 2026)
|
7,359 lbs (3,338 kg)
|
|
Tipping Load – Full Turn – ISO 14397-1 † (Since 2026)
|
7,220 lbs (3,275 kg)
|
|
Tipping Load – Straight – ISO 14397-1 † (Since 2026)
|
8,613 lbs (3,907 kg)
|
|
Turning Radius - Inside Tire (Since 2026)
|
7 ft (2 m)
|
|
Turning Radius - Over Bucket (Since 2026)
|
15 ft (4 m)
|
|
Turning Radius: Outside of Tires (Since 2026)
|
13 ft (4 m)
|
|
Width - Bucket (Since 2026)
|
6 ft (2 m)
|
|
Width - Over Tires (Since 2026)
|
6 ft (2 m)
|
|
Width - Tread Center (Since 2026)
|
5 ft (1 m)
|
| Engine |
|
Bore (Since 2026)
|
4 in (9 cm)
|
|
Displacement (Since 2026)
|
171 cu in (2,802 cu cm)
|
|
Engine Model (Since 2026)
|
Cat C2.8* |
|
Maximum Engine Speed (Since 2026)
|
2,550 rpm |
|
Maximum Gross Power (Since 2026)
|
75 hp (56 kw)
|
|
Maximum Gross Power - ISO 14396 (Since 2026)
|
74 hp (55 kw)
|
|
Maximum Gross Power - ISO 14396 (metric) (Since 2026)
|
75.3 mhp |
|
Maximum Gross Power - Rated Engine Speed (Since 2026)
|
2,400 r/min |
|
Maximum Gross Power - SAE J1995 (Since 2026)
|
75 hp (56 kw)
|
|
Maximum Gross Torque - ISO 14396 (Since 2026)
|
221 lbs ft (300 nm)
|
|
Maximum Gross Torque - SAE J1995 (Since 2026)
|
222 lbs ft (301 nm)
|
|
Maximum Net Torque - ISO 9249 (Since 2026)
|
217 lbs ft (294 nm)
|
|
Maximum Net Torque - SAE J1349 (Since 2026)
|
218 lbs ft (296 nm)
|
|
Rated Net Power - 2,400 rpm - ISO 9249 (metric) (Since 2026)
|
73.1 mhp |
|
Rated Net Power - ISO 9249 (Since 2026)
|
72 hp (54 kw)
|
|
Rated Net Power - Rated Engine Speed (Since 2026)
|
2,400 r/min |
|
Rated Net Power - SAE J1349 (Since 2026)
|
73 hp (54 kw)
|
|
Stroke (Since 2026)
|
4 in (11 cm)
|
| General Specifications |
|
1st (Since 2001)
|
8 5 |
|
1st (Since 2006)
|
7 4 |
|
2nd (Since 2001)
|
20 12 |
|
2nd (2006)
|
20 12 |
|
A Height to top of stack (Since 2001)
|
107 in (3 m)
|
|
A Height to top of stack (2006)
|
107 in (3 m)
|
|
B Height to top of engine compartment (Since 2001)
|
72 in (2 m)
|
|
B Height to top of engine compartment (2006)
|
72 in (2 m)
|
|
Bore (Since 1998)
|
4 in (97 mm)
|
|
Bore (2001)
|
4 in (97 mm)
|
|
Bore (Since 2006)
|
4 in (94 mm)
|
|
Breakout Force (Since 2023)
|
11,233 lbf |
|
Breakout force (§) (Since 2001)
|
10,140 lbf (45 kN)
|
|
Breakout force (§) (2006)
|
10,140 lbf (45 kN)
|
|
Breakout force [GP, Bare, 0.8 cu m] (Since 1998)
|
10,210 lbf (45 kN)
|
|
Breakout force [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
9,720 lbf (43 kN)
|
|
Breakout force [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
10,190 lbf (45 kN)
|
|
Breakout force [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
10,170 lbf (45 kN)
|
|
Breakout force [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
9,090 lbf (40 kN)
|
|
Breakout force [High Dump, Bare, 0.7 cu m] (Since 1998)
|
9,960 lbf (44 kN)
|
|
Breakout force [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
9,450 lbf (42 kN)
|
|
Breakout force [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
9,920 lbf (44 kN)
|
|
Breakout force [Light Material, Bare, 1.2 cu m] (Since 1998)
|
7,760 lbf (35 kN)
|
|
Breakout force [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
7,420 lbf (33 kN)
|
|
Breakout force [MP, Bare, 0.8 cu m] (Since 1998)
|
10,010 lbf (45 kN)
|
|
Breakout force [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
9,510 lbf (42 kN)
|
|
Breakout force [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
9,960 lbf (44 kN)
|
|
Breakout force [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
9,940 lbf (44 kN)
|
|
Breakout force [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
8,880 lbf (40 kN)
|
|
Breakout force [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
8,160 lbf (36 kN)
|
|
Breakout force [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
7,780 lbf (35 kN)
|
|
Breakout force [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
8,120 lbf (36 kN)
|
|
Breakout force [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
10,190 lbf (45 kN)
|
|
Breakout force [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
9,670 lbf (43 kN)
|
|
Breakout force [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
10,140 lbf (45 kN)
|
|
Bucket Capacity (Since 2022)
|
1.0 - 1.7 (.80 - 1.35) |
|
Bucket Capacity (2023)
|
1.0 - 1.7 (.80 - 1.35) |
|
Bucket Capacity (Since 2024)
|
1.0 - 1.5 (.80 - 1.15) |
|
Bucket Capacity (Since 2025)
|
1.0 - 1.5 |
|
Bucket Capacity (2026)
|
1.0 - 1.5 |
|
Bucket width (Since 2001)
|
78 in (1,970 mm)
|
|
Bucket width (2006)
|
78 in (1,970 mm)
|
|
C Height to top of ROPS (Since 2001)
|
106 in (3 m)
|
|
C Height to top of ROPS (2006)
|
106 in (3 m)
|
|
D Hinge pin height at carry position (Since 2001)
|
16 in (416 mm)
|
|
D Hinge pin height at carry position (2006)
|
16 in (416 mm)
|
|
Digging depth (§) (Since 2001)
|
4 in (99 mm)
|
|
Digging depth (§) (2006)
|
4 in (99 mm)
|
|
Digging depth [GP, Bare, 0.8 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
4 in (100 mm)
|
|
Digging depth [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
4 in (100 mm)
|
|
Digging depth [High Dump, Bare, 0.7 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
4 in (100 mm)
|
|
Digging depth [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [Light Material, Bare, 1.2 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
4 in (100 mm)
|
|
Digging depth [MP, Bare, 0.8 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
4 in (99 mm)
|
|
Digging depth [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
4 in (99 mm)
|
|
Digging depth [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
4 in (100 mm)
|
|
Digging depth [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Digging depth [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
4 in (100 mm)
|
|
Digging depth [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
3 in (84 mm)
|
|
Dump clearance at full lift and - 45° discharge angle (Since 2001)
|
94 in (2 m)
|
|
Dump clearance at full lift and - F Hinge pin height at full lift (Since 2001)
|
123 in (3 m)
|
|
Dump clearance at full lift and 43° discharge (§) (Since 2001)
|
88 in (2,247 mm)
|
|
Dump clearance at full lift and 43° discharge (§) (2006)
|
88 in (2,247 mm)
|
|
Dump clearance at full lift and 43° discharge [GP, Bare, 0.8 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
94 in (2,391 mm)
|
|
Dump clearance at full lift and 43° discharge [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
93 in (2,356 mm)
|
|
Dump clearance at full lift and 43° discharge [High Dump, Bare, 0.7 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
94 in (2,391 mm)
|
|
Dump clearance at full lift and 43° discharge [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [Light Material, Bare, 1.2 cu m] (Since 1998)
|
90 in (2,281 mm)
|
|
Dump clearance at full lift and 43° discharge [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
88 in (2,247 mm)
|
|
Dump clearance at full lift and 43° discharge [MP, Bare, 0.8 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
94 in (2,391 mm)
|
|
Dump clearance at full lift and 43° discharge [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
93 in (2,357 mm)
|
|
Dump clearance at full lift and 43° discharge [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
91 in (2,322 mm)
|
|
Dump clearance at full lift and 43° discharge [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
90 in (2,288 mm)
|
|
Dump clearance at full lift and 43° discharge [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
91 in (2,322 mm)
|
|
Dump clearance at full lift and 43° discharge [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 43° discharge [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
94 in (2,391 mm)
|
|
Dump clearance at full lift and 43° discharge [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
95 in (2,425 mm)
|
|
Dump clearance at full lift and 45° discharge angle (Since 2006)
|
94 in (2 m)
|
|
Dump clearance at full lift and 45° discharge angle [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
94 in (2 m)
|
|
Engine (Since 2023)
|
C2.8 |
|
Engine Displacement (Since 1998)
|
180 cu in (3 L)
|
|
Engine Displacement (2001)
|
180 cu in (3 L)
|
|
Engine Displacement (2006)
|
180 cu in (3 L)
|
|
Engine Model (Since 1998)
|
3,034 |
|
Engine Model (2001)
|
3,034 |
|
Engine Model (Since 2006)
|
Cat 3044C |
|
Engine Power (Since 2022)
|
74 hp (55 kw)
|
|
Engine Power (2023)
|
74 hp (55 kw)
|
|
Engine Power (2024)
|
74 hp (55 kw)
|
|
Engine Power Net (Since 2025)
|
74 hp (55 kw)
|
|
Engine Power Net (2026)
|
74 hp (55 kw)
|
|
Engine type (Since 2022)
|
Cat C2.8 |
|
Engine type (2023)
|
Cat C2.8 |
|
Engine type (2024)
|
Cat C2.8 |
|
Engine type (2025)
|
Cat C2.8 |
|
Engine type (2026)
|
Cat C2.8 |
|
F Hinge pin height at full lift (Since 2006)
|
123 in (3 m)
|
|
Flywheel Power: Gross (Since 1998)
|
63 hp (47 kW)
|
|
Flywheel Power: Gross (2001)
|
63 hp (47 kW)
|
|
Flywheel Power: Gross (Since 2006)
|
75 hp (56 kW)
|
|
Flywheel Power: Net (Since 1998)
|
60 hp (45 kW)
|
|
Flywheel Power: Net (2001)
|
60 hp (45 kW)
|
|
Flywheel Power: Net (Since 2006)
|
68 hp (51 kW)
|
|
Forward Speed - 1st (Lo) (Since 1998)
|
5 mph (8 km/h)
|
|
Forward Speed - 2nd (Hi) (Since 1998)
|
12 mph (20 km/h)
|
|
Free radius of tire [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
19 in (475 mm)
|
|
Fuel Tank Capacity (Since 1998)
|
20 US gal (74 L)
|
|
Fuel Tank Capacity (2001)
|
20 US gal (74 L)
|
|
Fuel Tank Capacity (2006)
|
20 US gal (74 L)
|
|
Full-Turn Tipping Load (Since 2023)
|
8,225 lb |
|
G Maximum overall height (Since 2001)
|
164 in (4 m)
|
|
G Maximum overall height (2006)
|
164 in (4 m)
|
|
Gross Power (Since 2024)
|
75 hp (56 kw)
|
|
Gross Power (2025)
|
75 hp (56 kw)
|
|
Ground Clearance (Since 1998)
|
17 in (420 mm)
|
|
Ground Clearance (2001)
|
17 in (420 mm)
|
|
Ground Clearance (2006)
|
17 in (420 mm)
|
|
Ground clearance (std. tires) (Since 2001)
|
13 in (317 mm)
|
|
Ground clearance (std. tires) (2006)
|
13 in (317 mm)
|
|
Ground clearance (std. tires) [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
13 in (317 mm)
|
|
H Maximum digging depth (Since 2001)
|
4 in (100 mm)
|
|
H Maximum digging depth (2006)
|
4 in (100 mm)
|
|
Height to top of engine compartment [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
72 in (2 m)
|
|
Height to top of ROPS [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
106 in (3 m)
|
|
Height to top of stack [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
107 in (3 m)
|
|
Hinge pin height at carry position [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
16 in (416 mm)
|
|
Hinge pin height at full lift [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
123 in (3 m)
|
|
Hydraulic Cycle Time - Dump [Rated load in bucket; lowering empty in float] (Since 1998)
|
2 sec |
|
Hydraulic Cycle Time - Lower (Empty, Float Down) [Rated load in bucket; lowering empty in float] (Since 1998)
|
3 sec |
|
Hydraulic Cycle Time - Raise [Rated load in bucket; lowering empty in float] (Since 1998)
|
5 sec |
|
Hydraulic Cycle Time - Total [Rated load in bucket; lowering empty in float] (Since 1998)
|
9 sec |
|
Hydraulic Cycle Time, - Dump (Since 2001)
|
2 sec |
|
Hydraulic Cycle Time, - Dump (2006)
|
2 sec |
|
Hydraulic Cycle Time, - Lower (Empty, Float Down) (Since 2001)
|
3 sec |
|
Hydraulic Cycle Time, - Lower (Empty, Float Down) (Since 2006)
|
3 sec |
|
Hydraulic Cycle Time, - Raise (Since 2001)
|
5 sec |
|
Hydraulic Cycle Time, - Raise (2006)
|
5 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket (Since 2001)
|
Seconds |
|
Hydraulic Cycle Time, - Rated Load in Bucket (2006)
|
Seconds |
|
Hydraulic Cycle Time, - Total (Since 2001)
|
9 sec |
|
Hydraulic Cycle Time, - Total (Since 2006)
|
9 sec |
|
Hydraulic System Capacity - (includes tank) (Since 1998)
|
18 US gal (66 L)
|
|
Hydraulic System Capacity - (includes tank) (2001)
|
18 US gal (66 L)
|
|
Hydraulic System Capacity - (includes tank) (2006)
|
18 US gal (66 L)
|
|
Hydraulic Tank Capacity (Since 1998)
|
13 US gal (49 L)
|
|
Hydraulic Tank Capacity (2001)
|
13 US gal (49 L)
|
|
Hydraulic Tank Capacity (2006)
|
13 US gal (49 L)
|
|
J Machine center point to axle (Since 2001)
|
39 in (1 m)
|
|
J Machine center point to axle (2006)
|
39 in (1 m)
|
|
K Wheel base (Since 2006)
|
79 in (2 m)
|
|
K Wheelbase (Since 2001)
|
79 in (2 m)
|
|
L Free radius of tire (Since 2001)
|
19 in (508 mm)
|
|
L Free radius of tire (2006)
|
19 in (508 mm)
|
|
Loader clearance circle with bucket in carry position (Since 2001)
|
347 in (9 m)
|
|
Loader clearance circle with bucket in carry position (2006)
|
347 in (9 m)
|
|
Loader clearance circle with bucket in carry position [GP, Bare, 0.8 cu m] (Since 1998)
|
328 in (8,330 mm)
|
|
Loader clearance circle with bucket in carry position [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
329 in (8,368 mm)
|
|
Loader clearance circle with bucket in carry position [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
328 in (8,330 mm)
|
|
Loader clearance circle with bucket in carry position [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
328 in (8,330 mm)
|
|
Loader clearance circle with bucket in carry position [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
330 in (8,394 mm)
|
|
Loader clearance circle with bucket in carry position [High Dump, Bare, 0.7 cu m] (Since 1998)
|
329 in (8,366 mm)
|
|
Loader clearance circle with bucket in carry position [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
331 in (8,404 mm)
|
|
Loader clearance circle with bucket in carry position [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
329 in (8,366 mm)
|
|
Loader clearance circle with bucket in carry position [Light Material, Bare, 1.2 cu m] (Since 1998)
|
335 in (8,506 mm)
|
|
Loader clearance circle with bucket in carry position [MP, Bare, 0.8 cu m] (Since 1998)
|
328 in (8,330 mm)
|
|
Loader clearance circle with bucket in carry position [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
329 in (8,358 mm)
|
|
Loader clearance circle with bucket in carry position [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
328 in (8,330 mm)
|
|
Loader clearance circle with bucket in carry position [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
328 in (8,330 mm)
|
|
Loader clearance circle with bucket in carry position [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
330 in (8,386 mm)
|
|
Loader clearance circle with bucket in carry position [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
331 in (8,412 mm)
|
|
Loader clearance circle with bucket in carry position [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
332 in (8,442 mm)
|
|
Loader clearance circle with bucket in carry position [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
331 in (8,412 mm)
|
|
Loader clearance circle with bucket in carry position [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
328 in (8,328 mm)
|
|
Loader clearance circle with bucket in carry position [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
329 in (8,358 mm)
|
|
Loader clearance circle with bucket in carry position [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
328 in (8,328 mm)
|
|
M Maximum overall length (Since 2001)
|
209 in (5 m)
|
|
M Maximum overall length (2006)
|
209 in (5 m)
|
|
Machine center point to axle [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
39 in (1 m)
|
|
Max. Dump Height (Since 2023)
|
8 ft (3 m)
|
|
Maximum digging depth [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
4 in (100 mm)
|
|
Maximum overall height [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
164 in (4 m)
|
|
Maximum overall length [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
211 in (5 m)
|
|
Maximum rollback at carry height [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
53 deg |
|
Maximum rollback at ground [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
43 deg |
|
Maximum rollback at maximum lift [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
63 deg |
|
N Reach at full lift (Since 2001)
|
32 in (824 mm)
|
|
N Reach at full lift (2006)
|
32 in (824 mm)
|
|
Net Power (Since 2023)
|
75 hp (56 kw)
|
|
No. Cylinders (Since 1998)
|
4 |
|
No. Cylinders (2001)
|
4 |
|
No. Cylinders (2006)
|
4 |
|
Notes (Since 2023)
|
Based on standard lift, general purpose bucket and coupler. |
|
O Maximum rollback at maximum lift (Since 2001)
|
63 deg |
|
O Maximum rollback at maximum lift (2006)
|
63 deg |
|
Operating weight (Since 2001)
|
11,390 lbs (5,164 kg)
|
|
Operating weight (2006)
|
11,390 lbs (5,164 kg)
|
|
Operating Weight (Since 2022)
|
12,628 lbs (5,728 kg)
|
|
Operating Weight (2023)
|
12,628 lbs (5,728 kg)
|
|
Operating Weight (Since 2024)
|
12,898 lbs (5,850 kg)
|
|
Operating Weight (2025)
|
12,898 lbs (5,850 kg)
|
|
Operating weight [GP, Bare, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,240 lbs (5,096 kg)
|
|
Operating weight [GP, Bolt-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,310 lbs (5,131 kg)
|
|
Operating weight [GP, Bolt-on Teeth, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,270 lbs (5,110 kg)
|
|
Operating weight [GP, Pin-on Tips, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,290 lbs (5,118 kg)
|
|
Operating weight [GP, Weld-on Edge, 0.9 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,330 lbs (5,138 kg)
|
|
Operating weight [High Dump, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,640 lbs (5,279 kg)
|
|
Operating weight [High Dump, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,720 lbs (5,316 kg)
|
|
Operating weight [High Dump, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,670 lbs (5,294 kg)
|
|
Operating weight [Light Material, Bare, 1.2 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,420 lbs (5,178 kg)
|
|
Operating weight [Light Material, Bolt-on Edge, 1.2 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,500 lbs (5,216 kg)
|
|
Operating weight [MP, Bare, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,780 lbs (5,343 kg)
|
|
Operating weight [MP, Bolt-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,860 lbs (5,379 kg)
|
|
Operating weight [MP, Bolt-on Teeth, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,810 lbs (5,357 kg)
|
|
Operating weight [MP, Pin-on Tips, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,830 lbs (5,365 kg)
|
|
Operating weight [MP, Weld-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,860 lbs (5,380 kg)
|
|
Operating weight [Side Dump, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,730 lbs (5,318 kg)
|
|
Operating weight [Side Dump, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,810 lbs (5,355 kg)
|
|
Operating weight [Side Dump, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,760 lbs (5,332 kg)
|
|
Operating weight [Stone Sieve, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,350 lbs (5,149 kg)
|
|
Operating weight [Stone Sieve, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,440 lbs (5,188 kg)
|
|
Operating weight [Stone Sieve, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
11,390 lbs (5,164 kg)
|
|
OperatingWeight (Since 2026)
|
12,898 lbs (5,850 kg)
|
|
Overall height with bucket at full raise (§) (Since 2001)
|
159 in (4,037 mm)
|
|
Overall height with bucket at full raise (§) (2006)
|
159 in (4,037 mm)
|
|
Overall height with bucket at full raise [GP, Bare, 0.8 cu m] (Since 1998)
|
164 in (4,170 mm)
|
|
Overall height with bucket at full raise [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
164 in (4,170 mm)
|
|
Overall height with bucket at full raise [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
164 in (4,170 mm)
|
|
Overall height with bucket at full raise [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
164 in (4,170 mm)
|
|
Overall height with bucket at full raise [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
164 in (4,170 mm)
|
|
Overall height with bucket at full raise [High Dump, Bare, 0.7 cu m] (Since 1998)
|
166 in (4,212 mm)
|
|
Overall height with bucket at full raise [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
166 in (4,212 mm)
|
|
Overall height with bucket at full raise [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
166 in (4,212 mm)
|
|
Overall height with bucket at full raise [Light Material, Bare, 1.2 cu m] (Since 1998)
|
170 in (4,314 mm)
|
|
Overall height with bucket at full raise [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
170 in (4,314 mm)
|
|
Overall height with bucket at full raise [MP, Bare, 0.8 cu m] (Since 1998)
|
166 in (4,205 mm)
|
|
Overall height with bucket at full raise [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
166 in (4,205 mm)
|
|
Overall height with bucket at full raise [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
166 in (4,205 mm)
|
|
Overall height with bucket at full raise [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
166 in (4,205 mm)
|
|
Overall height with bucket at full raise [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
166 in (4,205 mm)
|
|
Overall height with bucket at full raise [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
166 in (4,211 mm)
|
|
Overall height with bucket at full raise [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
166 in (4,211 mm)
|
|
Overall height with bucket at full raise [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
166 in (4,211 mm)
|
|
Overall height with bucket at full raise [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
159 in (4,037 mm)
|
|
Overall height with bucket at full raise [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
159 in (4,037 mm)
|
|
Overall height with bucket at full raise [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
159 in (4,037 mm)
|
|
Overall length (Since 2001)
|
219 in (5,565 mm)
|
|
Overall length (2006)
|
219 in (5,565 mm)
|
|
Overall length [GP, Bare, 0.8 cu m] (Since 1998)
|
209 in (5,310 mm)
|
|
Overall length [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
211 in (5,355 mm)
|
|
Overall length [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
213 in (5,412 mm)
|
|
Overall length [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
214 in (5,437 mm)
|
|
Overall length [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
213 in (5,405 mm)
|
|
Overall length [High Dump, Bare, 0.7 cu m] (Since 1998)
|
209 in (5,310 mm)
|
|
Overall length [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
211 in (5,355 mm)
|
|
Overall length [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
213 in (5,412 mm)
|
|
Overall length [Light Material, Bare, 1.2 cu m] (Since 1998)
|
217 in (5,520 mm)
|
|
Overall length [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
219 in (5,565 mm)
|
|
Overall length [MP, Bare, 0.8 cu m] (Since 1998)
|
209 in (5,309 mm)
|
|
Overall length [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
211 in (5,354 mm)
|
|
Overall length [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
213 in (5,411 mm)
|
|
Overall length [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
214 in (5,437 mm)
|
|
Overall length [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
213 in (5,405 mm)
|
|
Overall length [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
215 in (5,461 mm)
|
|
Overall length [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
217 in (5,505 mm)
|
|
Overall length [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
219 in (5,562 mm)
|
|
Overall length [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
209 in (5,310 mm)
|
|
Overall length [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
211 in (5,355 mm)
|
|
Overall length [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
213 in (5,412 mm)
|
|
P Maximum rollback at carry height (Since 2001)
|
53 deg |
|
P Maximum rollback at carry height (2006)
|
53 deg |
|
Q Maximum rollback at ground (Since 2001)
|
43 deg |
|
Q Maximum rollback at ground (2006)
|
43 deg |
|
Rated Bucket Capacity (Since 2023)
|
2-Jan yd³ |
|
Rated bucket capacity (§) (Since 2001)
|
2 cu yd (1 cu m)
|
|
Rated bucket capacity (§) (2006)
|
2 cu yd (1 cu m)
|
|
Rated bucket capacity [GP, Bare, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [High Dump, Bare, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [Light Material, Bare, 1.2 cu m] (Since 1998)
|
2 cu yd (1 cu m)
|
|
Rated bucket capacity [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
2 cu yd (1 cu m)
|
|
Rated bucket capacity [MP, Bare, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated bucket capacity [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Rated Engine RPM (Since 1998)
|
2,600 rpm |
|
Rated Engine RPM (2001)
|
2,600 rpm |
|
Rated Engine RPM (2006)
|
2,600 rpm |
|
Reach at 43° discharge and 2130 mm (7'0") clearance (§) (Since 2001)
|
41 in (1,054 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance (§) (2006)
|
41 in (1,054 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [GP, Bare, 0.8 cu m] (Since 1998)
|
42 in (1,070 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
39 in (982 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
45 in (1,142 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
46 in (1,160 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
44 in (1,118 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [High Dump, Bare, 0.7 cu m] (Since 1998)
|
42 in (1,070 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
41 in (1,039 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
43 in (1,082 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [Light Material, Bare, 1.2 cu m] (Since 1998)
|
43 in (1,090 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
42 in (1,068 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [MP, Bare, 0.8 cu m] (Since 1998)
|
43 in (1,071 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
41 in (1,045 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
45 in (1,143 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
46 in (1,161 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
42 in (1,061 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
43 in (1,087 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
42 in (1,067 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
43 in (1,091 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
42 in (1,070 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
41 in (1,054 mm)
|
|
Reach at 43° discharge and 2130 mm (7'0") clearance [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
43 in (1,082 mm)
|
|
Reach at full lift and 43° discharge (§) (Since 2001)
|
36 in (903 mm)
|
|
Reach at full lift and 43° discharge (§) (2006)
|
36 in (903 mm)
|
|
Reach at full lift and 43° discharge [GP, Bare, 0.8 cu m] (Since 1998)
|
33 in (829 mm)
|
|
Reach at full lift and 43° discharge [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
33 in (842 mm)
|
|
Reach at full lift and 43° discharge [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
35 in (901 mm)
|
|
Reach at full lift and 43° discharge [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
36 in (922 mm)
|
|
Reach at full lift and 43° discharge [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
35 in (879 mm)
|
|
Reach at full lift and 43° discharge [High Dump, Bare, 0.7 cu m] (Since 1998)
|
33 in (829 mm)
|
|
Reach at full lift and 43° discharge [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
33 in (842 mm)
|
|
Reach at full lift and 43° discharge [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
36 in (904 mm)
|
|
Reach at full lift and 43° discharge [Light Material, Bare, 1.2 cu m] (Since 1998)
|
39 in (982 mm)
|
|
Reach at full lift and 43° discharge [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
39 in (995 mm)
|
|
Reach at full lift and 43° discharge [MP, Bare, 0.8 cu m] (Since 1998)
|
33 in (829 mm)
|
|
Reach at full lift and 43° discharge [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
33 in (842 mm)
|
|
Reach at full lift and 43° discharge [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
36 in (904 mm)
|
|
Reach at full lift and 43° discharge [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
36 in (923 mm)
|
|
Reach at full lift and 43° discharge [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
35 in (879 mm)
|
|
Reach at full lift and 43° discharge [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
37 in (938 mm)
|
|
Reach at full lift and 43° discharge [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
37 in (951 mm)
|
|
Reach at full lift and 43° discharge [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
40 in (1,013 mm)
|
|
Reach at full lift and 43° discharge [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
33 in (829 mm)
|
|
Reach at full lift and 43° discharge [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
33 in (842 mm)
|
|
Reach at full lift and 43° discharge [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
36 in (903 mm)
|
|
Reach at full lift [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
39 in (982 mm)
|
|
Reach with lift arms horizontal and bucket level (Since 2001)
|
85 in (2,155 mm)
|
|
Reach with lift arms horizontal and bucket level (2006)
|
85 in (2,155 mm)
|
|
Reach with lift arms horizontal and bucket level [GP, Bare, 0.8 cu m] (Since 1998)
|
75 in (1,912 mm)
|
|
Reach with lift arms horizontal and bucket level [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
77 in (1,945 mm)
|
|
Reach with lift arms horizontal and bucket level [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
79 in (2,014 mm)
|
|
Reach with lift arms horizontal and bucket level [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
80 in (2,040 mm)
|
|
Reach with lift arms horizontal and bucket level [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
79 in (1,995 mm)
|
|
Reach with lift arms horizontal and bucket level [High Dump, Bare, 0.7 cu m] (Since 1998)
|
75 in (1,912 mm)
|
|
Reach with lift arms horizontal and bucket level [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
77 in (1,945 mm)
|
|
Reach with lift arms horizontal and bucket level [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
79 in (2,015 mm)
|
|
Reach with lift arms horizontal and bucket level [Light Material, Bare, 1.2 cu m] (Since 1998)
|
84 in (2,122 mm)
|
|
Reach with lift arms horizontal and bucket level [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
85 in (2,155 mm)
|
|
Reach with lift arms horizontal and bucket level [MP, Bare, 0.8 cu m] (Since 1998)
|
75 in (1,912 mm)
|
|
Reach with lift arms horizontal and bucket level [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
77 in (1,945 mm)
|
|
Reach with lift arms horizontal and bucket level [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
79 in (2,014 mm)
|
|
Reach with lift arms horizontal and bucket level [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
80 in (2,040 mm)
|
|
Reach with lift arms horizontal and bucket level [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
79 in (1,995 mm)
|
|
Reach with lift arms horizontal and bucket level [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
81 in (2,062 mm)
|
|
Reach with lift arms horizontal and bucket level [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
82 in (2,095 mm)
|
|
Reach with lift arms horizontal and bucket level [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
85 in (2,165 mm)
|
|
Reach with lift arms horizontal and bucket level [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
75 in (1,912 mm)
|
|
Reach with lift arms horizontal and bucket level [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
77 in (1,945 mm)
|
|
Reach with lift arms horizontal and bucket level [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
79 in (2,014 mm)
|
|
Reverse Speed - 1st (Lo) (Since 1998)
|
5 mph (8 km/h)
|
|
Reverse Speed - 2nd (Hi) (Since 1998)
|
12 mph (20 km/h)
|
|
Speeds Reverse - 1st (Since 2001)
|
8 5 |
|
Speeds Reverse - 1st (Since 2006)
|
7 4 |
|
Speeds Reverse - 2nd (Since 2001)
|
20 12 |
|
Speeds Reverse - 2nd (2006)
|
20 12 |
|
Static tipping load, full turn (§) (Since 2001)
|
6,330 lbs (2,874 kg)
|
|
Static tipping load, full turn (§) (2006)
|
6,330 lbs (2,874 kg)
|
|
Static tipping load, full turn [GP, Bare, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,530 lbs (2,962 kg)
|
|
Static tipping load, full turn [GP, Bolt-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,430 lbs (2,917 kg)
|
|
Static tipping load, full turn [GP, Bolt-on Teeth, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,490 lbs (2,944 kg)
|
|
Static tipping load, full turn [GP, Pin-on Tips, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,460 lbs (2,934 kg)
|
|
Static tipping load, full turn [GP, Weld-on Edge, 0.9 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,410 lbs (2,909 kg)
|
|
Static tipping load, full turn [High Dump, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,140 lbs (2,787 kg)
|
|
Static tipping load, full turn [High Dump, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,000 lbs (2,725 kg)
|
|
Static tipping load, full turn [High Dump, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,100 lbs (2,768 kg)
|
|
Static tipping load, full turn [Light Material, Bare, 1.2 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,310 lbs (2,864 kg)
|
|
Static tipping load, full turn [Light Material, Bolt-on Edge, 1.2 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,170 lbs (2,802 kg)
|
|
Static tipping load, full turn [MP, Bare, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,090 lbs (2,765 kg)
|
|
Static tipping load, full turn [MP, Bolt-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
5,950 lbs (2,702 kg)
|
|
Static tipping load, full turn [MP, Bolt-on Teeth, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,050 lbs (2,746 kg)
|
|
Static tipping load, full turn [MP, Pin-on Tips, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,030 lbs (2,736 kg)
|
|
Static tipping load, full turn [MP, Weld-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
5,910 lbs (2,684 kg)
|
|
Static tipping load, full turn [Side Dump, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
5,720 lbs (2,598 kg)
|
|
Static tipping load, full turn [Side Dump, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
5,600 lbs (2,540 kg)
|
|
Static tipping load, full turn [Side Dump, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
5,680 lbs (2,580 kg)
|
|
Static tipping load, full turn [Stone Sieve, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,370 lbs (2,892 kg)
|
|
Static tipping load, full turn [Stone Sieve, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,230 lbs (2,828 kg)
|
|
Static tipping load, full turn [Stone Sieve, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,330 lbs (2,874 kg)
|
|
Static tipping load, straight (§) (Since 2001)
|
7,350 lbs (3,335 kg)
|
|
Static tipping load, straight (§) (2006)
|
7,350 lbs (3,335 kg)
|
|
Static tipping load, straight [GP, Bare, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,550 lbs (3,427 kg)
|
|
Static tipping load, straight [GP, Bolt-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,450 lbs (3,382 kg)
|
|
Static tipping load, straight [GP, Bolt-on Teeth, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,510 lbs (3,410 kg)
|
|
Static tipping load, straight [GP, Pin-on Tips, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,490 lbs (3,399 kg)
|
|
Static tipping load, straight [GP, Weld-on Edge, 0.9 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,430 lbs (3,374 kg)
|
|
Static tipping load, straight [High Dump, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,170 lbs (3,252 kg)
|
|
Static tipping load, straight [High Dump, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,020 lbs (3,188 kg)
|
|
Static tipping load, straight [High Dump, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,130 lbs (3,234 kg)
|
|
Static tipping load, straight [Light Material, Bare, 1.2 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,330 lbs (3,327 kg)
|
|
Static tipping load, straight [Light Material, Bolt-on Edge, 1.2 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,190 lbs (3,263 kg)
|
|
Static tipping load, straight [MP, Bare, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,130 lbs (3,234 kg)
|
|
Static tipping load, straight [MP, Bolt-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,980 lbs (3,169 kg)
|
|
Static tipping load, straight [MP, Bolt-on Teeth, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,080 lbs (3,215 kg)
|
|
Static tipping load, straight [MP, Pin-on Tips, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,060 lbs (3,205 kg)
|
|
Static tipping load, straight [MP, Weld-on Edge, 0.8 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,930 lbs (3,147 kg)
|
|
Static tipping load, straight [Side Dump, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,690 lbs (3,038 kg)
|
|
Static tipping load, straight [Side Dump, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,560 lbs (2,979 kg)
|
|
Static tipping load, straight [Side Dump, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
6,650 lbs (3,020 kg)
|
|
Static tipping load, straight [Stone Sieve, Bare, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,390 lbs (3,353 kg)
|
|
Static tipping load, straight [Stone Sieve, Bolt-on Edge, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,240 lbs (3,286 kg)
|
|
Static tipping load, straight [Stone Sieve, Bolt-on Teeth, 0.7 cu m] [Implements, ROPS cab, 12.5-20 tires, full fuel, operator, 80 kg counterweight] (Since 1998)
|
7,350 lbs (3,335 kg)
|
|
Stroke (Since 1998)
|
4 in (100 mm)
|
|
Stroke (2001)
|
4 in (100 mm)
|
|
Stroke (Since 2006)
|
5 in (120 mm)
|
|
Struck capacity (§) (Since 2001)
|
1 cu yd (1 cu m)
|
|
Struck capacity (§) (2006)
|
1 cu yd (1 cu m)
|
|
Struck capacity [GP, Bare, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [High Dump, Bare, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [Light Material, Bare, 1.2 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [MP, Bare, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Struck capacity [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
1 cu yd (1 cu m)
|
|
Tip Load (Since 2022)
|
9,756 lbs (4,425 kg)
|
|
Tip Load (2023)
|
9,756 lbs (4,425 kg)
|
|
Tip Load (Since 2024)
|
7,529 lbs (3,415 kg)
|
|
Tip Load (2025)
|
7,529 lbs (3,415 kg)
|
|
Tip Load (2026)
|
7,529 lbs (3,415 kg)
|
|
Tires used for measurements (Since 1998)
|
12.5-20 |
|
Tires used for measurements (2001)
|
12.5-20 |
|
Tires used for measurements (2006)
|
12.5-20 |
|
Travel Speed (Since 2024)
|
25 / 12.5 mph |
|
Travel Speed (Fwd/Rev) (Since 2025)
|
25 / 12.5 mph |
|
Travel Speed (Fwd/Rev) (2026)
|
25 / 12.5 mph |
|
Travel Speed(Fwd/Rev) (Since 2022)
|
25 / 19 mph |
|
Travel Speed(Fwd/Rev) (2023)
|
25 / 19 mph |
|
Tread Width (Since 1998)
|
55 in (1 m)
|
|
Tread Width (Since 2001)
|
57 in (2 m)
|
|
Tread Width (2006)
|
57 in (2 m)
|
|
Tread width (std. tires) (Since 2001)
|
57 in (2 m)
|
|
Tread width (std. tires) (2006)
|
57 in (2 m)
|
|
Tread width (std. tires) [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
55 in (1 m)
|
|
Wheelbase [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
79 in (2 m)
|
|
Width Over Tires (Since 1998)
|
72 in (2 m)
|
|
Width Over Tires (Since 2001)
|
72 in (2 m)
|
|
Width Over Tires (2006)
|
72 in (2 m)
|
|
Width over tires (std. tires) (Since 2001)
|
72 in (2 m)
|
|
Width over tires (std. tires) (2006)
|
72 in (2 m)
|
|
Width over tires (std. tires) [Standard tires; general purpose bucket with bolt-on cutting edge] (Since 1998)
|
69 in (2 m)
|
|
Width [GP, Bare, 0.8 cu m] (Since 1998)
|
74 in (1,880 mm)
|
|
Width [GP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
74 in (1,890 mm)
|
|
Width [GP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
74 in (1,880 mm)
|
|
Width [GP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
74 in (1,880 mm)
|
|
Width [GP, Weld-on Edge, 0.9 cu m] (Since 1998)
|
74 in (1,890 mm)
|
|
Width [High Dump, Bare, 0.7 cu m] (Since 1998)
|
74 in (1,887 mm)
|
|
Width [High Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
74 in (1,887 mm)
|
|
Width [High Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
74 in (1,887 mm)
|
|
Width [Light Material, Bare, 1.2 cu m] (Since 1998)
|
77 in (1,950 mm)
|
|
Width [Light Material, Bolt-on Edge, 1.2 cu m] (Since 1998)
|
78 in (1,970 mm)
|
|
Width [MP, Bare, 0.8 cu m] (Since 1998)
|
74 in (1,890 mm)
|
|
Width [MP, Bolt-on Edge, 0.8 cu m] (Since 1998)
|
74 in (1,890 mm)
|
|
Width [MP, Bolt-on Teeth, 0.8 cu m] (Since 1998)
|
74 in (1,890 mm)
|
|
Width [MP, Pin-on Tips, 0.8 cu m] (Since 1998)
|
74 in (1,890 mm)
|
|
Width [MP, Weld-on Edge, 0.8 cu m] (Since 1998)
|
74 in (1,890 mm)
|
|
Width [Side Dump, Bare, 0.7 cu m] (Since 1998)
|
74 in (1,880 mm)
|
|
Width [Side Dump, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
74 in (1,880 mm)
|
|
Width [Side Dump, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
74 in (1,880 mm)
|
|
Width [Stone Sieve, Bare, 0.7 cu m] (Since 1998)
|
74 in (1,880 mm)
|
|
Width [Stone Sieve, Bolt-on Edge, 0.7 cu m] (Since 1998)
|
74 in (1,880 mm)
|
|
Width [Stone Sieve, Bolt-on Teeth, 0.7 cu m] (Since 1998)
|
74 in (1,880 mm)
|
| Loader Hydraulic System |
|
Hydraulic Cycle Time - Dump (Since 2026)
|
2 s |
|
Hydraulic Cycle Time - Float Down (Since 2026)
|
3 s |
|
Hydraulic Cycle Time - Lift (Since 2026)
|
5 s |
|
Hydraulic Cycle Time - Rackback (Since 2026)
|
2 s |
|
Main Relief - 1st Auxiliary (3rd slice) (Since 2026)
|
3,408 psi |
|
Main Relief - 1st Auxiliary (3rd slice) - High Flow* (Since 2026)
|
32 gpm (121 lpm)
|
|
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow* (Since 2026)
|
21 gpm (79 lpm)
|
|
Main Relief - 2nd Auxiliary (4th slice) (Since 2026)
|
3,408 psi |
|
Main Relief - 2nd Auxiliary (4th slice) - Flow (Since 2026)
|
12 gpm (45 lpm)
|
| Service Refill Capacities |
|
Axles - Front Center Differential (Since 2026)
|
2 gal (9 l)
|
|
Axles - Rear Center Differential (Since 2026)
|
2 gal (9 l)
|
|
Cooling System (Since 2026)
|
3 gal (12 l)
|
|
Engine Crankcase (Since 2026)
|
2 gal (9 l)
|
|
Fuel Tank (Since 2026)
|
19 gal (70 l)
|
|
Hydraulic System - Including Tank (Since 2026)
|
18 gal (67 l)
|
|
Hydraulic Tank (Since 2026)
|
12 gal (45 l)
|
|
Transmission (Since 2026)
|
1 gal (2 l)
|
| Steering |
|
Maximum Flow - Steering Pump (Since 2026)
|
12 gpm (47 lpm)
|
|
Maximum Working Pressure - Steering Pump (Since 2026)
|
3,336 psi |
|
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left (Since 2026)
|
3.25 turns or 4.00 turns |
|
Steering Articulation Angle - Each Direction (Since 2026)
|
39 degrees |
|
Steering Cycle Times – (full left to full right) – at High Idle (Since 2026)
|
3 s |
| Sustainability |
|
Recyclability (Since 2026)
|
93% |
| Tires |
|
Tire Size - Optional (Since 2026)
|
405/70 R18 Powerloads |
|
Tire Size - Optional (1) (Since 2026)
|
340/80 R18 XMCL/Bibload |
|
Tire Size - Optional (2) (Since 2026)
|
340/80 R18 TRI 2 |
|
Tire Size - Optional (3) (Since 2026)
|
40X14-20 TL, SM/TR |
|
Tire Size - Optional 4 (Since 2026)
|
340/80 R18 Duraforce |
|
Tire Size - Standard (Since 2026)
|
*405/70 R18 SPT9 |
| Transmission |
|
Forward and Reverse - Speed Range 1* (Since 2026)
|
6 mph (10 kph)
|
|
Forward and Reverse - Speed Range 2** - High Speed (Since 2026)
|
11 mph (17 kph)
|
|
Forward and Reverse - Speed Range 2** - Standard (Since 2026)
|
12 mph (19 kph)
|
|
Forward and Reverse - Speed Range 3*** (Since 2026)
|
25 mph (40 kph)
|
|
Forward and Reverse - Speed Range Creep# (Since 2026)
|
6 mph (10 kph)
|
| Weights |
|
Operating Weight (Since 2026)
|
12,628 lbs (5,728 kg)
|
