List and Sell Your Equipment  /  Dealer Login  /  Create Account

2018 Caterpillar 906M For Sale in Salt Lake City, UT



For Sale: $70,480.00 USD

Apply for Financing

Machine Info:

Hours:2250
Serial Number:H6602358
Stock Number:CCE01863U
Machine Location:SALT LAKE CITY, UT 84120

Description:

*906M WHEEL LOADER S3B CERT*SEAT BELT, RETRACTABLE 3"*SECURITY SYSTEM, NONE*ENGINE, 55KW, C3.3B, T4F, HRC*AIR CONDITIONER, AND HEATER*PRODUCT LINK, CELLULAR, PL240LANE 1 ORDER*LIGHTS, ROADING RH DRIVE DIP*VALVE, DRAIN, ECO*ALARM, BACK UP*PRECLEANER*TRANS 22 MPH DIFF LOCK E/H*FEATURE PACKAGE, LOAD/ROADPACK, DOMESTIC TRUCK*FAN, COOLING, ON DEMAND*CAB, DELUXE, SINGLE BRAKEINSTRUCTIONS, ANSI*SOUND SUPPRESSION, STANDARD*HYDRAULIC OIL, STANDARD*HARNESS, WIRING, WT, VERTICAL*ANTIFREEZE, -50C (-58F)*JOYSTICK,E/H,TANDEM VALVE*LIGHTS, CAB, WORKING HALOGENSERIALIZED TECHNICAL MEDIA KITTIRES, 340/80 R18,FS,DURAFORCE*CPLR, VERT, STD FLOWPRICED 02/23/21 KR


Specs from the manufacturer:

Bucket
Bucket Capacities2 cu yds (1 m)
Bucket Capacities - ISO Coupler0.75-1.2 m
Bucket Capacities - SSL Style Coupler1.0-1.6 cu yds (1 m)
General Purpose1.2 yd
Light Material2 cu yds (1 m)
Cab
FOPSSAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
ROPSSAE J1040 MAY94, ISO 3471-1994.
Cab Features - Canopy
External Knock Back MirrorsStandard
Lockable Storage BoxStandard
Dimensions - With ISO Coupler - Approximate
Dig Depth4 in (9 cm)
Turning Radius - Inside Tire7 ft (2 m)
Turning Radius - Over Bucket15 ft (4 m)
Dimensions - With SSL Coupler - Approximate
Dig Depth5 in (12 cm)
Turning Radius - Inside Tire7 ft (2 m)
Turning Radius - Over Bucket15 ft (4 m)
Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler
Articulation Angle39 °
Clearance - Bucket at 45 degrees *8 ft (2 m)
Clearance - Level Bucket**10 ft (3 m)
Departure Angle33 °
Dig Depth**4 in (9 cm)
Dump Angle at Full Lift45 °
Height - Bucket Pin**11 ft (3 m)
Height - Ground Clearance**1 ft (0 m)
Height - Ground to Cab**8 ft (2 m)
Length - Overall*18 ft (5 m)
Length - Wheel Base7 ft (2 m)
Machine Width6 ft (2 m)
Note (1)*Vary with bucket.
Note (2)**Vary with tire.
Note (3)Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Reach - Bucket at 45 degrees*2 ft (1 m)
Turning Radius - Inside of Tires7 ft (2 m)
Turning Radius - Over Bucket15 ft (4 m)
Width - Bucket6 ft (2 m)
Width - Tread Center5 ft (1 m)
Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler
Articulation Angle39 °
Clearance - Bucket at 45 degrees *8 ft (2 m)
Clearance - Level Bucket**10 ft (3 m)
Departure Angle33 °
Dig Depth**4 in (11 cm)
Dump Angle at Full Lift45 °
Height - Bucket Pin**11 ft (3 m)
Height - Ground Clearance**1 ft (0 m)
Height - Ground to Cab**8 ft (2 m)
Length - Overall*19 ft (6 m)
Length - Wheel Base7 ft (2 m)
Machine Width6 ft (2 m)
Reach - Bucket at 45 degrees*3 ft (1 m)
Turning Radius - Inside of Tires7 ft (2 m)
Turning Radius - Over Bucket15 ft (4 m)
Width - Bucket6 ft (2 m)
Width - Tread Center5 ft (1 m)
Drive System
Forward - High Range22 mph (35 kph)
Forward - Range 16 mph (10 kph)
Forward - Range 212 mph (19 kph)
Reverse - High Range22 mph (35 kph)
Reverse - Range 16 mph (10 kph)
Reverse - Range 212 mph (19 kph)
Engine
Bore4 in (9 cm)
Displacement201 cu in (0 m)
Emissions*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
Engine ModelCat C3.3B DIT*
Maximum Gross Power73 hp (54 kw)
Maximum Gross Power - ISO 1439673 hp (54 kw)
Maximum Gross Power - ISO 14396 (DIN)74 hp (55 kw)
Maximum Gross Power - SAE J199574 hp (55 kw)
Maximum Gross Torque - ISO 14396192 lbs/ft
Maximum Net Power - ISO 924969 hp (51 kw)
Maximum Net Power - SAE J134968 hp (51 kw)
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269191 lbs/ft
Maximum Net Torque - SAE J1349189 lbs/ft
Net Power74 hp (55 kw)
Note (5)The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/126974 hp (55 kw)
Rated Net Power - 2,400 rpm - SAE J134973 hp (54 kw)
Rated Net Power - 2,500 rpm - SAE J134968 hp (51 kw)
Stroke5 in (12 cm)
Hydraulic System
Hydraulic Cycle Time - Dump1 sec
Hydraulic Cycle Time - Lift5.2econds sec
Hydraulic Cycle Time - Lower3 sec
Hydraulic Cycle Time - Rackback2 sec
Main Relief - 3rd Aux Flow3,400 psi
Main Relief - 3rd Aux Flow: High Flow31 gal/min (117 l/min)
Main Relief - 3rd Aux Flow: Standard20 gal/min (76 l/min)
Loader Hydraulic System
3rd Function Maximum Working Pressure3,408 psi
Boost Flow Maximum Pressure3,191 psi
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height3 sec
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level3 sec
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift10 sec
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height2 sec
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level3 sec
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift6 sec
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time10 sec
Lift Cylinder, Double Acting - Bore Diameter3 in (8 cm)
Lift Cylinder, Double Acting - Rod Diameter2 in (5 cm)
Lift Cylinder, Double Acting - Stroke27 in (70 cm)
Maximum Flow - Implement Pump19 gal/min (72 l/min)
Maximum Flow - Implement Pump - Auxiliary Function High Flow31 gal/min (117 l/min)
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow19 gal/min (72 l/min)
Maximum Working Pressure - Implement Pump3,408 psi
Relief Pressure - Tilt Cylinder Head4,496 psi
Relief Pressure - Tilt Cylinder Rod2,756 psi
Tilt Cylinder, Double Acting - Bore Diameter4 in (9 cm)
Tilt Cylinder, Double Acting - Rod Diameter2 in (6 cm)
Tilt Cylinder, Double Acting - Stroke16 in (42 cm)
Maximum Material Densities - General Purpose Bucket
Bucket Width74 in (188 cm)
Dump Height94 in (239 cm)
Rated Capacity1 cu yds (1 m)
Maximum Material Densities - Light Material Bucket
Bucket Width82 in (208 cm)
Dump Height90 in (229 cm)
Rated Capacity2 cu yds (1 m)
Maximum Material Densities - Multi Purpose Bucket
Bucket Width74 in (188 cm)
Dump Height97 in (246 cm)
Rated Capacity1 cu yds (1 m)
Operating Specifications
Clearance - Full Lift and 45 degrees Dump8 ft (3 m)
Full Turn Tipping Load7,507 lbs (3,405 kg)
Operating Weight12,346 lbs (5,600 kg)
Rated Bucket Capacity1 cu yds (1 m)
Reach - Full Lift and 45 degrees Dump2 ft (1 m)
Steering Articulation Angle - Each Direction39 °
Tipping Load - Full Turn - ISO 14397-17,061 lbs (3,203 kg)
Tipping Load - Straight - ISO 14397-18,666 lbs (3,931 kg)
Operating Specifications - ISO Coupler
Breakout Force - Bucket11,044 lbs/ft
Full Turn Static Tipping Load - Bucket9,970 lbs (4,522 kg)
Rack Back - Transport Position52 °
Rated Bucket Capacity1 cu yds (1 m)
Rated Operating Load at Full Turn - Bucket3,884 lbs (1,762 kg)
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center)4,848 lbs (2,199 kg)
Straight Tipping Load - Bucket9,674 lbs (4,388 kg)
Tire Size340/80 R18
Operating Specifications - SSL Coupler
Breakout Force - Bucket9,004 lbs/ft
Full Turn Static Tipping Load - Bucket7,676 lbs (3,482 kg)
Rack Back - Transport Position52 °
Rated Bucket Capacity1 cu yds (1 m)
Rated Operating Load at Full Turn - Bucket3,754 lbs (1,703 kg)
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center)4,553 lbs (2,065 kg)
Straight Tipping Load - Bucket9,215 lbs (4,180 kg)
Tire Size340/80 R18
Service Refill Capacities
Cooling System4 gal (17 l)
Engine Crankcase3 gal (11 l)
Engine Oil3 gal (11 l)
Fuel Tank14 gal (52 l)
Hydraulic System19 gal (70 l)
Hydraulic Tank12 gal (46 l)
Transmission - Gear Box2 gal (8 l)
Steering System
Maximum Steering Torque - 0 degrees (Straight Machine)37,155 lbs/ft
Maximum Steering Torque - 39 degrees (Full Turn)27,747 lbs/ft
Maximum Working Pressure - Steering Pump3,191 psi
Nominal Flow - Steering Pump12 gal/min (45 l/min)
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left<6 turns
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm3 sec
Steering Articulation Angle - Each Direction39 °
Steering Cylinder, Double Acting - Bore Diameter3 in (8 cm)
Steering Cylinder, Double Acting - Rod Diameter1 in (4 cm)
Steering Cylinder, Double Acting - Stroke12 in (30 cm)
Tires
Note (1)*Standard tire.
Note (2)Other tire choices available, contact your Cat dealer for details.
Note (3)In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (4)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (1)335/80 R18 XZSL Michelin
Option (2)340/80 R18 AT-R Firestone
Option (3)340/80 R18 XMCL Michelin
Option (4)340/80 R18 TRI2 Nokian
Option (5)340/80 R18 Bibload Michelin
Option (6)405/70 R18 SPT9 Dunlop*
Option (7)12.5/80 R18 Flexport
Travel Speeds
High Speed22 mph (35 kph)
Speed 16 mph (10 kph)
Speed 212 mph (20 kph)
Weights
NoteMachine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, skid steer loader coupler (SSL) and general purpose bucket (GP).
Operating Weight12,346 lbs (5,600 kg)

Dealer Contact Info:

Wheeler Machinery Co.


Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo