| Buckets |
|
Bucket Capacities |
1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3) |
|
Buckets Type |
Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention. |
|
General Purpose |
1.2-1.5 m3 (1.6-2.0 yd3) |
| Cab |
|
Fops |
FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
|
Rops |
ROPS: SAE J1040 MAY94, ISO 3471-1994. |
|
Sound |
The declared dynamic operator sound pressure level per ISO 6396:2008 is: - Deluxe cab: 75 dB(A) |
| Dimensions |
|
Height |
11 ft (3 m)
|
|
Length |
21 ft (6 m)
|
|
Weight |
17,910 lbs (8,124 kg)
|
|
Width |
7 ft (2 m)
|
| Engine |
|
Bore |
4 in (10 cm)
|
|
Displacement |
232 cu in (3,799 cu cm)
|
|
Engine Model |
Cat C3.8 Turbo |
|
Maximum Gross Power |
97 hp (72 kw)
|
|
Maximum Gross Power - Iso 14396 |
97 hp (72 kw)
|
|
Maximum Gross Power - Sae J1995 |
97 hp (72 kw)
|
|
Net Power |
96 hp (72 kw)
|
|
Note |
Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards. |
|
Peak Torque |
248 lbs ft (336 nm)
|
|
Rated Net Power - Iso 9249/Eec |
96 hp (72 kw)
|
|
Rated Net Power - Sae J1349 |
92 hp (69 kw)
|
|
Rated Torque |
237 lbs ft (321 nm)
|
|
Rpm At Peak Torque |
1,500 rpm |
|
Rpm At Rated Power |
2,400 rpm |
|
Stroke |
5 in (12 cm)
|
|
Torque Rise |
17 % |
| Loader Hydraulic System |
|
Cycle Time - Dump |
1.8 s |
|
Cycle Time - Float |
3.7 s |
|
Cycle Time - Lift |
5.3 s |
|
Cycle Time - Lower, Float |
4 s |
|
Cycle Time - Rackback |
2.4 s |
|
Lift Cylinder - Bore Diameter |
4 in (10 cm)
|
|
Lift Cylinder - Rod Diameter |
2 in (6 cm)
|
|
Lift Cylinders - Stroke |
23 in (59 cm)
|
|
Main Relief Pressure |
4,061 psi |
|
Maximum Flow - Implement Pump - 3rd Function |
25 gpm (95 lpm)
|
|
Maximum Flow - Implement Pump - 4th Function |
25 gpm (95 lpm)
|
|
Maximum Pump Flow |
33 gpm (125 lpm)
|
|
Maximum Working Pressure - Implement Pump |
3,046 psi |
|
Tilt Cylinder - Bore Diameter |
4 in (10 cm)
|
|
Tilt Cylinder - Rod Diameter |
2 in (6 cm)
|
|
Tilt Cylinder - Stroke |
23 in (58 cm)
|
| Operating Specifications |
|
Clearance - Full Lift And 45 Degrees Dump |
112 ft (34 m)
|
|
Full Turn Tip Load |
12,294 lbs (5,576 kg)
|
|
Full Turn Tipping Load - High Lift |
8,603 lbs (3,902 kg)
|
|
Full Turn Tipping Load - Standard Lift |
10,538 lbs (4,779 kg)
|
|
Rated Bucket Capacity |
3 cu yd |
|
Reach - Full Lift And 45 Degrees Dump |
31 ft (9 m)
|
|
Steering Articulation Angle - Each Direction |
40 degrees |
| Operational |
|
Operating Weight |
17,910 lbs (8,122 kg)
|
| Power Train |
|
Brakes - Park Brake |
Cable applied, spring release |
|
Brakes - Service Brakes |
Inboard wet disc |
|
Front Axle |
Fixed |
|
Front Axle - Traction Aid |
Locking differential |
|
Rear Axle |
Oscillating |
|
Rear Axle - Oscillation |
11 degrees |
|
Rear Axle - Traction Aid |
Locking differential |
|
Type (1) |
Power train is fully hydrostatic, operating with twin motors on a gear reduction system to amplify torque. |
|
Type (2) |
A built-in clutch on one motor de-clutches at higher speeds to gain maximum travel speed. |
| Service Refill Capacities |
|
Axle - Front, Center |
2 gal (8 l)
|
|
Axle - Front, Each Hub |
1 gal (2 l)
|
|
Axle - Rear, Center |
2 gal (8 l)
|
|
Axle - Rear, Each Hub |
1 gal (2 l)
|
|
Cooling System |
4 gal (17 l)
|
|
Engine Crankcase |
3 gal (13 l)
|
|
Fuel Tank |
40 gal (150 l)
|
|
Hydraulic System |
23 gal (85 l)
|
|
Hydraulic Tank - Refill |
16 gal (60 l)
|
|
Transmission - Gear Box |
1 gal (3 l)
|
| Steering |
|
Maximum Flow - Steering Pump |
22 gpm (84 lpm)
|
|
Maximum Steering Torque - 0 Degrees (Straight Machine) |
27,369 lbs ft (37,107 nm)
|
|
Maximum Steering Torque - 39 Degrees (Full Turn) |
21,593 lbs ft (29,276 nm)
|
|
Maximum Working Pressure - Steering Pump |
3,263 psi |
|
Number Of Steering Wheel Turns - Stop To Stop, Turning Wheel At < 27 Rpm |
5.75 turns |
|
Number Of Steering Wheel Turns - Stop To Stop, Turning Wheel At > 67 Rpm |
3.75 turns |
|
Steering Articulation Angle - Each Direction |
40 degrees |
|
Steering Cycle Times - Stop To Stop - At 2,400 Rpm Engine Speed, 90 Rpm Steering Wheel Speed |
2.8 s |
|
Steering Cylinder, Double Acting - Bore Diameter |
2 in (6 cm)
|
|
Steering Cylinder, Double Acting - Rod Diameter |
1 in (4 cm)
|
|
Steering Cylinder, Double Acting - Stroke |
16 in (40 cm)
|
|
Steering Type |
Steering system uses a dedicated pump with dual double acting cylinders. |
| Tires |
|
Note |
Wheel sets are interchangeable between the 910K and 914K. |
|
Tire Size - Non-Pneumatic - Flexport |
53.5916.5 (15.5/17.525 equivalent) |
|
Tire Size - Optional (1) |
17.5-R25 |
|
Tire Size - Optional (2) |
17.5-25 16PR |
|
Tire Size - Standard |
17.5-25 12PR |
| Transmission |
|
Forward - High Range |
25 mph (40 kph)
|
|
Forward - Low Range, Speed Range 1 |
6 mph (10 kph)
|
|
Forward - Low Range, Speed Range 2 |
13 mph (20 kph)
|
|
Reverse - High Range |
25 mph (40 kph)
|
|
Reverse - Low Range, Speed Range 1 |
6 mph (10 kph)
|
|
Reverse - Low Range, Speed Range 2 |
13 mph (20 kph)
|
|
Type (1) |
Changing from Low Range to High Range is on-the-go for added convenience. |
|
Type (2) |
Creeper control allows maximum speed range adjustability from 0 to 10 km/h (6 mph) in Speed Range 1. |
| Weights |
|
Operating Weight |
17,910 lbs (8,122 kg)
|
|
Operating Weight - High Lift |
18,030 lbs (8,177 kg)
|
|
Operating Weight - Standard Lift |
17,910 lbs (8,122 kg)
|
