| Axles |
|
Front |
Fixed; Locking differential (standard) |
|
Rear |
Oscillating 11 degrees; Locking differential (Standard) |
| Buckets |
|
Bucket Capacities |
1.3-1.9 m3 (1.7-2.5 yd3) |
| Cab |
|
Fops |
ISO 3449:2005 Level II |
|
Note (1) |
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
|
Note (2) |
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
|
Note (3) |
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
|
Note (4) |
*The measurements were conducted with the cab doors and windows closed. |
|
Rops |
ISO 3471:2008 |
| Dimensions |
|
Height |
10 ft (3 m)
|
|
Length |
21 ft (6 m)
|
|
Weight |
18,199 lbs (8,255 kg)
|
|
Width |
7 ft (2 m)
|
| Engine |
|
Bore |
4 in (11 cm)
|
|
Displacement |
268 cu in (4,392 cu cm)
|
|
Emissions |
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
|
Engine Model |
Cat C4.4 ACERT |
|
Maximum Gross Power |
100 hp (75 kw)
|
|
Maximum Gross Power - Iso 14396 |
100 hp (75 kw)
|
|
Maximum Gross Power - Iso 14396 (Din) |
101 hp (75 kw)
|
|
Maximum Gross Power - Maximum Engine Speed |
2,350 rpm |
|
Maximum Gross Power - Sae J1995 |
102 hp (76 kw)
|
|
Maximum Gross Torque - Iso 14396 |
332 lbs ft (450 nm)
|
|
Maximum Gross Torque - Sae J1995 |
336 lbs ft (456 nm)
|
|
Maximum Net Torque - Iso 9249 |
329 lbs ft (446 nm)
|
|
Maximum Net Torque - Sae J1349 |
325 lbs ft (441 nm)
|
|
Net Power |
97 hp (72 kw)
|
|
Note |
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
|
Rated Net Power - Iso 9249 |
97 hp (72 kw)
|
|
Rated Net Power - Iso 9249 (Din) |
98 hp (73 kw)
|
|
Rated Net Power - Rated Engine Speed |
2,200 rpm |
|
Rated Net Power - Sae J1349 |
96 hp (72 kw)
|
|
Stroke |
5 in (13 cm)
|
| General Specifications |
|
Bucket Capacity (Since 2016)
|
1.7 - 2.5 |
|
Bucket Capacity (Since 2017)
|
1.7 - 2.5 (1.3 - 1.9) |
|
Bucket Capacity (2019)
|
1.7 - 2.5 (1.3 - 1.9) |
|
Bucket Capacity (2021)
|
1.7 - 2.5 (1.3 - 1.9) |
|
Engine Power (Since 2016)
|
92 hp (69 kw)
|
|
Engine Power (Since 2017)
|
92 (69) |
|
Engine Power (2019)
|
92 (69) |
|
Engine Power (Since 2021)
|
92 (68.6) |
|
Engine type (Since 2016)
|
Cat C4.4 ACERT |
|
Engine type (2017)
|
Cat C4.4 ACERT |
|
Engine type (2019)
|
Cat C4.4 ACERT |
|
Engine type (2021)
|
Cat C4.4 ACERT |
|
Max Dump Height (Since 2016)
|
3 ft (1 m)
|
|
Max Dump Height (Since 2017)
|
2.8 (0.9) |
|
Max Dump Height (Since 2019)
|
9.1 (2.8) |
|
Operating Weight (Since 2016)
|
19,262 lbs (8,736 kg)
|
|
Operating Weight (Since 2017)
|
19,262 (8,737) |
|
Operating Weight (2019)
|
19,262 (8,737) |
|
Operating Weight (Since 2021)
|
19,262 (8.737) |
|
Tip Load (Since 2021)
|
11,845 (5,373) |
|
Travel Speed(Fwd/Rev) (Since 2021)
|
25 / 25 mph |
| Loader Hydraulic System |
|
Hydraulic Cycle Time - Dump, At Maximum Reach |
1.4 s |
|
Hydraulic Cycle Time - Float Down, Maximum Lift To Ground Level |
3.7 s |
|
Hydraulic Cycle Time - Rackback |
2.2 s |
|
Hydraulic Cycle Time - Raise, Ground Level To Maximum Lift |
5.2 s |
|
Hydraulic Cycle Time - Total Cycle Time |
12.5 s |
|
Maximum Flow - Implement Pump |
39 gpm (148 lpm)
|
|
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High |
32 gpm (121 lpm)
|
|
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard |
24 gpm (91 lpm)
|
|
Maximum Flow - Implement Pump - 4th Function, Maximum Flow |
24 gpm (91 lpm)
|
|
Maximum Working Pressure - Implement Pump |
4,061 psi |
|
Relief Pressure - Tilt Cylinder |
4,931 psi |
|
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure |
3,046 psi |
|
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure |
3,046 psi |
| Operating Specifications |
|
Rated Bucket Capacity |
3 cu yd |
| Operational |
|
Operating Weight |
19,315 lbs (8,760 kg)
|
| Service Refill Capacities |
|
Axles - Front Center Differential |
2 gal (8 l)
|
|
Axles - Rear Center Differential |
2 gal (8 l)
|
|
Cooling System |
6 gal (22 l)
|
|
Diesel Exhaust Fluid (Def) Tank |
5 gal (19 l)
|
|
Engine Crankcase |
2 gal (9 l)
|
|
Fuel Tank |
41 gal (154 l)
|
|
Hydraulic System - Including Tank |
26 gal (98 l)
|
|
Hydraulic Tank |
15 gal (55 l)
|
|
Note |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
|
Transmission |
1 gal (3 l)
|
| Steering |
|
Maximum Flow - Steering Pump |
22 gpm (83 lpm)
|
|
Maximum Working Pressure - Steering Pump |
3,263 psi |
|
Number Of Steering Wheel Turns - Full Left To Full Right Or Full Right To Full Left |
3.75 turns |
|
Steering Articulation Angle - Each Direction |
40 degrees |
|
Steering Cycle Times - Full Left To Full Right - At 2,350 Rpm: 90 Rpm Steering Wheel Speed |
2.8 s |
| Tires |
|
Note (1) |
Other tire choices are available. Contact your Cat dealer for details. |
|
Note (2) |
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. |
|
Note (3) |
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
|
Other Choices Include |
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport |
|
Standard Size |
17.5-25 12PR |
| Transmission |
|
Forward And Reverse - High Range |
25 mph (40 kph)
|
|
Forward And Reverse - Low Range, Speed Range 1* |
6 mph (10 kph)
|
|
Forward And Reverse - Low Range, Speed Range 2* |
13 mph (20 kph)
|
|
Note |
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
