Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $62,000.00 USD
Apply for Financing| Hours: | 7070 |
| Serial Number: | SL400174 |
| Machine Location: | WINDSOR, CO |
| More Information: | https://catused.com/cu/10300943 |
Supplied by HeavyEquipmentData.com →
| Axles | |
| Front (Since 2026) | Fixed; Locking differential (standard) |
| Rear (Since 2026) | Oscillating ±11 degrees; Locking differential (standard) |
| Buckets | |
| Bucket Capacities (Since 2026) | 1.3-3.5 m3 (1.7-4.6 yd3) |
| Bucket Capacities - General Purpose (Since 2026) | 1.3-1.9 m³ (1.7-2.5 yd³) |
| Bucket Capacities - Light Material (Since 2026) | 2.5-3.5 m³ (3.3-4.6 yd³) |
| Cab | |
| FOPS (Since 2026) | ISO 3449:2005 |
| ROPS (Since 2026) | ISO 3471:2008 |
| Dimensions | |
| Height | 10 ft (3 m) |
| Length | 19 ft (6 m) |
| Weight | 18,600 lbs (8,437 kg) |
| Width | 8 ft (2 m) |
| Engine | |
| Bore (Since 2026) | 4 in (10 cm) |
| Displacement (Since 2026) | 220 cu in (3,605 cu cm) |
| Emissions (Since 2026) | Engine meets Tier 4 Final/Stage V emission standards. |
| Engine Model (Since 2026) | Cat C3.6 |
| Maximum Gross Power (Since 2026) | 121 hp (90 kw) |
| Maximum Gross Power - ISO 14396 (Since 2026) | 121 hp (90 kw) |
| Maximum Gross Power - ISO 14396 (metric) (Since 2026) | 122 hp (91 kw) |
| Maximum Gross Power - Rated Engine Speed (Since 2026) | 2,200 r/min |
| Maximum Gross Torque - ISO 14396 (Since 2026) | 369 ft·lbf |
| Maximum Gross Torque - SAE J1995 (Since 2026) | 372 ft·lbf |
| Maximum Net Torque - ISO 9249 (Since 2026) | 363 ft·lbf |
| Maximum Net Torque - SAE J1349 (Since 2026) | 366 ft·lbf |
| Rated Net Power - ISO 9249 (Since 2026) | 118 hp (88 kw) |
| Rated Net Power - Rated Engine Speed (Since 2026) | 2,200 r/min |
| Rated Net Power - SAE J1349 (Since 2026) | 120 hp (89 kw) |
| Stroke (Since 2026) | 5 in (12 cm) |
| General Specifications | |
| Bucket Capacity (Since 2020) | 1.7 - 4.6 (1.3 - 3.5) |
| Bucket Capacity (Since 2021) | 1.7 - 2.5 (1.3 - 1.9) |
| Bucket Capacity (Since 2025) | 1.7 - 2.5 |
| Engine Power (Since 2020) | 121 (90) |
| Engine Power Net (Since 2025) | 121 hp (90 kw) |
| Engine type (Since 2020) | Cat C3.6 |
| Max Dump Height (Since 2020) | 9.2 (2.8) |
| Operating Weight (Since 2020) | 21,742 (9,862) |
| Operating Weight (Since 2024) | 21,694 (9,843) |
| Operating Weight (Since 2025) | 21,694 lbs (9,840 kg) |
| OperatingWeight (Since 2026) | 21,694 lbs (9,840 kg) |
| Tip Load (Since 2021) | 12,439 (5,642) |
| Tip Load (Since 2024) | 13,280 (6,026) |
| Tip Load (Since 2025) | 13,280 lbs (6,024 kg) |
| Travel Speed (Since 2024) | 25 / 12.5 mph |
| Travel Speed (Fwd/Rev) (Since 2025) | 25 / 12.5 mph |
| Travel Speed(Fwd/Rev) (Since 2021) | 25 / 25 mph |
| Loader Hydraulic System | |
| Hydraulic Cycle Time - Dump, at Maximum Reach (Since 2026) | 2 s |
| Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level (Since 2026) | 3 s |
| Hydraulic Cycle Time - Rackback (Since 2026) | 2 s |
| Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift (Since 2026) | 5 s |
| Hydraulic Cycle Time - Total Cycle Time (Since 2026) | 12 s |
| Maximum Flow - Implement Pump (Since 2026) | 44 gpm (165 lpm) |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High (Since 2026) | 40 gpm (151 lpm) |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard (Since 2026) | 25 gpm (95 lpm) |
| Maximum Flow - Implement Pump - 4rd Function, Maximum Flow (Since 2026) | 25 gpm (95 lpm) |
| Maximum Working Pressure - Implement Pump (Since 2026) | 4,061 psi |
| Relief Pressure - Tilt Cylinder (Since 2026) | 4,641 psi |
| Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure (Since 2026) | 4,641 psi |
| Service Refill Capacities | |
| Axles - Front (Since 2026) | 5 gal (17 l) |
| Axles - Rear (Since 2026) | 5 gal (17 l) |
| Cooling System (Since 2026) | 6 gal (22 l) |
| Diesel Exhaust Fluid (DEF) Tank (Since 2026) | 5 gal (18 l) |
| Engine Crankcase (Since 2026) | 3 gal (10 l) |
| Fuel Tank (Since 2026) | 44 gal (165 l) |
| Hydraulic System - Including Tank (Since 2026) | 26 gal (98 l) |
| Hydraulic Tank (Since 2026) | 15 gal (55 l) |
| Transmission (Since 2026) | 1 gal (3 l) |
| Steering | |
| Maximum Flow - Steering Pump (Since 2026) | 22 gpm (82 lpm) |
| Maximum Working Pressure - Steering Pump (Since 2026) | 3,190 psi |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left (Since 2026) | 3.4 turns |
| Steering Articulation Angle - Each Direction (Since 2026) | 40 degrees |
| Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed (Since 2026) | 2 s |
| Sustainability | |
| Recyclability (Since 2026) | 95% |
| Tires | |
| Other Choices Include (Since 2026) | 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid |
| Standard Size (Since 2026) | 17.5 R25 L2 XTLA |
| Transmission | |
| Forward and Reverse - Speed Range 1* (Since 2026) | 6 mph (10 kph) |
| Forward and Reverse - Speed Range 2* (Since 2026) | 13 mph (20 kph) |
| Forward and Reverse - Speed Range 3 (Since 2026) | 25 mph (40 kph) |
| Weights | |
| Operating Weight (Since 2026) | 21,742 lbs (9,862 kg) |