| Air Conditioning System |
|
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
| Buckets |
|
Bucket Capacities |
1.9-5.0 m3 (2.5-6.5 yd3) |
| Cab |
|
Fops |
ISO 3449: 2005 LEVEL II |
|
Note (1) |
Declared sound levels per ISO 6396:2008* while in Performance Power Mode: Standard cab: 68 3 dB(A) and Deluxe cab |
|
Note (2) |
* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. |
|
Rops |
ISO 3471: 2008 |
| Dimensions |
|
Height |
11 ft (3 m)
|
|
Height |
11 ft (3 m)
|
|
Length |
24 ft (7 m)
|
|
Length |
27 ft (8 m)
|
|
Weight |
28,770 lbs (13,050 kg)
|
|
Weight |
28,770 lbs (13,050 kg)
|
|
Width |
8 ft (3 m)
|
|
Width |
8 ft (3 m)
|
| Engine |
|
Bore |
4 in (10 cm)
|
|
Displacement |
427 cu in (6,997 cu cm)
|
|
Emissions |
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
|
Engine Model |
Cat C7.1 ACERT |
|
Maximum Gross Power |
153 hp (114 kw)
|
|
Maximum Gross Torque - Iso 14396 (Performance Power Mode: Range 1-4) |
531 lbs ft (720 nm)
|
|
Maximum Gross Torque - Iso 14396 (Standard Power Mode: Range 1-3*) |
531 lbs ft (720 nm)
|
|
Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Performance Power Mode: Range 1-4) |
517 lbs ft (701 nm)
|
|
Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Standard Power Mode: Range 1-3*) |
517 lbs ft (701 nm)
|
|
Maximum Net Torque - Sae J1349 (Performance Power Mode: Range 1-4) |
511 lbs ft (693 nm)
|
|
Maximum Net Torque - Sae J1349 (Standard Power Mode: Range 1-3*) |
511 lbs ft (693 nm)
|
|
Maximum Rated Gross Power - Iso 14396 |
153 hp (114 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Din) |
155 hp (116 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Din) (Performance Power Mode: Range 1-4) |
155 hp (116 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Din) (Standard Power Mode: Range 1-3*) |
148 hp (110 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Performance Power Mode: Range 1-4) |
153 hp (114 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Standard Power Mode: Range 1-3*) |
146 hp (109 kw)
|
|
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) |
1,800 rpm |
|
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) |
1,600 rpm |
|
Note (1) |
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
|
Note (2) |
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
|
Note (3) |
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
|
Note (4) |
Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test). |
|
Rated Net Power |
148 hp (110 kw)
|
|
Rated Net Power - 1,600 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
142 hp (106 kw)
|
|
Rated Net Power - 1,600 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
144 hp (107 kw)
|
|
Rated Net Power - 1,600 Rpm - Sae J1349 At Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
141 hp (105 kw)
|
|
Rated Net Power - 1,800 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Performance Power Mode: Range 1-4) |
149 hp (111 kw)
|
|
Rated Net Power - 1,800 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Performance Power Mode: Range 1-4) |
151 hp (113 kw)
|
|
Rated Net Power - 1,800 Rpm - Sae J1349 At Minimum Fan Speed (Performance Power Mode: Range 1-4) |
148 hp (110 kw)
|
|
Stroke |
5 in (13 cm)
|
| General Specifications |
|
Bucket Capacity (Since 2016)
|
2.5 - 5.0 |
|
Bucket Capacity (Since 2017)
|
2.5 - 5.0 (1.9 - 3.8) |
|
Bucket Capacity (2019)
|
2.5 - 5.0 (1.9 - 3.8) |
|
Bucket Capacity (2020)
|
2.5 - 5.0 (1.9 - 3.8) |
|
Bucket Capacity (2021)
|
2.5 - 5.0 (1.9 - 3.8) |
|
Bucket Capacity (2022)
|
2.5 - 5.0 (1.9 - 3.8) |
|
Bucket Capacity (2023)
|
2.5 - 5.0 (1.9 - 3.8) |
|
Engine Power (Since 2016)
|
153 hp (114 kw)
|
|
Engine Power (Since 2017)
|
153 (114) |
|
Engine Power (2019)
|
153 (114) |
|
Engine Power (2020)
|
153 (114) |
|
Engine Power (2021)
|
153 (114) |
|
Engine Power (2022)
|
153 (114) |
|
Engine Power (2023)
|
153 (114) |
|
Engine type (Since 2016)
|
Cat C7.1 ACERT |
|
Engine type (2017)
|
Cat C7.1 ACERT |
|
Engine type (2019)
|
Cat C7.1 ACERT |
|
Engine type (Since 2020)
|
Cat C7.1 |
|
Engine type (2021)
|
Cat C7.1 |
|
Engine type (2022)
|
Cat C7.1 |
|
Engine type (2023)
|
Cat C7.1 |
|
Max Dump Height (Since 2016)
|
3 ft (1 m)
|
|
Max Dump Height (Since 2017)
|
3.3 (1.0) |
|
Max Dump Height (Since 2019)
|
9.4 (2.9) |
|
Max Dump Height (2020)
|
9.4 (2.9) |
|
Operating Weight (Since 2016)
|
28,770 lbs (13,048 kg)
|
|
Operating Weight (Since 2017)
|
28,770 (13,050) |
|
Operating Weight (2019)
|
28,770 (13,050) |
|
Operating Weight (2020)
|
28,770 (13,050) |
|
Operating Weight (2021)
|
28,770 (13,050) |
|
Operating Weight (2022)
|
28,770 (13,050) |
|
Operating Weight (2023)
|
28,770 (13,050) |
|
Tip Load (Since 2021)
|
19,383 (8,792) |
|
Tip Load (2022)
|
19,383 (8,792) |
|
Tip Load (2023)
|
19,383 (8,792) |
|
Travel Speed(Fwd/Rev) (Since 2021)
|
25 / 25 mph |
|
Travel Speed(Fwd/Rev) (2022)
|
25 / 25 mph |
|
Travel Speed(Fwd/Rev) (2023)
|
25 / 25 mph |
| Loader Hydraulic System |
|
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Dump (At Maximum Lift Height) |
1.5/1.7 seconds |
|
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Float Down (Maximum Lift To Ground Level) |
2.6/2.6 seconds |
|
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Raise (Ground Level To Maximum Lift) |
5.5/6.2 seconds |
|
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Total Cycle Time |
9.6/10.5 seconds |
|
Lift Cylinder, Double Acting - Bore Diameter |
4 in (11 cm)
|
|
Lift Cylinder, Double Acting - Rod Diameter |
2 in (6 cm)
|
|
Lift Cylinder, Double Acting - Stroke |
29 in (73 cm)
|
|
Maximum Flow - Implement Pump |
40 gpm (151 lpm)
|
|
Maximum Flow - Implement Pump - 3rd Function* |
40 gpm (151 lpm)
|
|
Maximum Flow - Implement Pump - 4th Function Maximum Flow* |
40 gpm (151 lpm)
|
|
Maximum Working Pressure - Implement Pump |
3,771 psi |
|
Note (1) |
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
|
Note (2) |
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
|
Note (3) |
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
|
Relief Pressure - Tilt Cylinder |
4,061 psi |
|
Relief Pressure - Tilt Cylinder - 3rd And 4th Function Maximum Working Pressure |
3,771 psi |
|
Relief Pressure - Tilt Cylinder - 3rd And 4th Function Relief Pressure |
4,061 psi |
|
Tilt Cylinder, Double Acting - Bore Diameter |
5 in (13 cm)
|
|
Tilt Cylinder, Double Acting - Rod Diameter |
3 in (7 cm)
|
|
Tilt Cylinder, Double Acting - Stroke |
22 in (56 cm)
|
| Operating Specifications |
|
Full Turn Tip Load |
16,587 lbs (7,522 kg)
|
| Operational |
|
Operating Weight |
28,770 lbs (13,048 kg)
|
| Power Train |
|
Brakes - Parking |
Spring applied hydraulically released |
|
Brakes - Service |
Inboard wet disc |
|
Front Axle |
Fixed |
|
Front Axle - Traction Aid - Standard |
Locking differential |
|
Note (1) |
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
|
Note (2) |
Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M. |
|
Rear Axle |
Oscillating |
|
Rear Axle - Oscillation Angle By Tire Size - 17.5 R25 |
14 degrees |
|
Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65 |
11 degrees |
|
Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder |
7 degrees |
|
Rear Axle - Traction Aid - Optional |
Limited slip differential |
| Service Refill Capacities |
|
Cooling System |
8 gal (30 l)
|
|
Diesel Exhaust Fluid (Def) Tank |
5 gal (19 l)
|
|
Engine Crankcase |
5 gal (20 l)
|
|
Front Axles |
6 gal (21 l)
|
|
Fuel Tank |
52 gal (195 l)
|
|
Hydraulic System - Including Tank |
42 gal (160 l)
|
|
Hydraulic Tank |
24 gal (90 l)
|
|
Rear Axles |
6 gal (21 l)
|
|
Transmission - Gear Box |
2 gal (8 l)
|
| Steering |
|
Maximum Flow - Steering Pump |
34 gpm (129 lpm)
|
|
Maximum Steering Torque - 0 Degrees (Straight Machine) |
37,155 lbs ft (50,375 nm)
|
|
Maximum Steering Torque - 40 Degrees (Full Turn) |
27,747 lbs ft (37,619 nm)
|
|
Maximum Working Pressure - Steering Pump |
3,500 psi |
|
Note (1) |
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
|
Note (2) |
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
|
Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed |
2.4 s |
|
Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited |
2.8 s |
|
Steering Cylinder, Double Acting - Bore Diameter |
3 in (7 cm)
|
|
Steering Cylinder, Double Acting - Rod Diameter |
2 in (4 cm)
|
|
Steering Cylinder, Double Acting - Stroke |
17 in (44 cm)
|
| Transmission |
|
Forward And Reverse - Range 1* |
1-13 km/h (0.6-8 mph) |
|
Forward And Reverse - Range 2 |
8 mph (13 kph)
|
|
Forward And Reverse - Range 3 |
17 mph (27 kph)
|
|
Forward And Reverse - Range 4 |
25 mph (40 kph)
|
|
Note |
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
