| Air Conditioning System |
|
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
| Buckets |
|
Bucket Capacities |
2.5-5.0 m3 (3.3-6.5 yd3) |
| Cab |
|
Fops |
ISO 3449: 2005 LEVEL II |
|
Note (1) |
Declared sound levels per ISO 6396:2008* while in Performance Power Mode: Standard cab: 68 3 dB(A) and Deluxe cab |
|
Note (2) |
* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. |
|
Rops |
ISO 3471: 2008 |
| Dimensions |
|
Height |
11 ft (3 m)
|
|
Length |
28 ft (8 m)
|
|
Weight |
36,216 lbs (16,427 kg)
|
|
Width |
9 ft (3 m)
|
| Engine |
|
Bore |
4 in (10 cm)
|
|
Displacement |
427 cu in (6,997 cu cm)
|
|
Emissions |
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
|
Engine Model |
Cat C7.1 ACERT |
|
Maximum Gross Power |
188 hp (140 kw)
|
|
Maximum Gross Torque - Iso 14396 (Performance Power Mode: Range 1-4) |
648 lbs ft (879 nm)
|
|
Maximum Gross Torque - Iso 14396 (Standard Power Mode: Range 1-3*) |
648 lbs ft (879 nm)
|
|
Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Performance Power Mode: Range 1-4) |
628 lbs ft (851 nm)
|
|
Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Standard Power Mode: Range 1-3*) |
628 lbs ft (851 nm)
|
|
Maximum Net Torque - Sae J1349 (Performance Power Mode: Range 1-4) |
621 lbs ft (842 nm)
|
|
Maximum Net Torque - Sae J1349 (Standard Power Mode: Range 1-3*) |
621 lbs ft (842 nm)
|
|
Maximum Rated Gross Power - Iso 14396 |
188 hp (140 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Din) |
190 hp (142 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Din) (Performance Power Mode: Range 1-4) |
190 hp (142 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Din) (Standard Power Mode: Range 1-3*) |
175 hp (131 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Performance Power Mode: Range 1-4) |
188 hp (140 kw)
|
|
Maximum Rated Gross Power - Iso 14396 (Standard Power Mode: Range 1-3*) |
173 hp (129 kw)
|
|
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) |
1,800 rpm |
|
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) |
1,600 rpm |
|
Note (1) |
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
|
Note (2) |
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
|
Note (3) |
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
|
Note (4) |
Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test). |
|
Rated Net Power |
182 hp (136 kw)
|
|
Rated Net Power - 1,600 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
169 hp (126 kw)
|
|
Rated Net Power - 1,600 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
171 hp (128 kw)
|
|
Rated Net Power - 1,600 Rpm - Sae J1349 At Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
168 hp (125 kw)
|
|
Rated Net Power - 1,800 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Performance Power Mode: Range 1-4) |
184 hp (137 kw)
|
|
Rated Net Power - 1,800 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Performance Power Mode: Range 1-4) |
186 hp (139 kw)
|
|
Rated Net Power - 1,800 Rpm - Sae J1349 At Minimum Fan Speed (Performance Power Mode: Range 1-4) |
182 hp (136 kw)
|
|
Stroke |
5 in (13 cm)
|
| General Specifications |
|
1st (Since 2016)
|
1.0-13.0 0.6-8.0 |
|
2nd (Since 2016)
|
13.0 8.0 |
|
3rd (Since 2016)
|
27.0 17.0 |
|
4th (Since 2016)
|
40.0 25.0 |
|
938M High Lift - Operating load (Since 2017)
|
4,612 lbs (2,092 kg)
|
|
938M High Lift - Operating load (2018)
|
4,612 lbs (2,092 kg)
|
|
938M High Lift - Operating load (2019)
|
4,612 lbs (2,092 kg)
|
|
938M High Lift - Operating weight (Since 2017)
|
34,606 lbs (15,697 kg)
|
|
938M High Lift - Operating weight (2018)
|
34,606 lbs (15,697 kg)
|
|
938M High Lift - Operating weight (2019)
|
34,606 lbs (15,697 kg)
|
|
938M High Lift - Static tipping load, full 40° turn (Since 2017)
|
9,224 lbs (4,184 kg)
|
|
938M High Lift - Static tipping load, full 40° turn (2018)
|
9,224 lbs (4,184 kg)
|
|
938M High Lift - Static tipping load, full 40° turn (2019)
|
9,224 lbs (4,184 kg)
|
|
938M High Lift - Static tipping load, straight (Since 2017)
|
10,651 lbs (4,831 kg)
|
|
938M High Lift - Static tipping load, straight (2018)
|
10,651 lbs (4,831 kg)
|
|
938M High Lift - Static tipping load, straight (2019)
|
10,651 lbs (4,831 kg)
|
|
938M High Lift Fusion Bucket - Breakout force (Since 2017)
|
21,795 lbf (9,886 kgf)
|
|
938M High Lift Fusion Bucket - Breakout force (Since 2018)
|
21,795 lbf (97 kN)
|
|
938M High Lift Fusion Bucket - Breakout force (2019)
|
21,795 lbf (97 kN)
|
|
938M High Lift Fusion Bucket - Bucket width (Since 2017)
|
108 in (2,750 mm)
|
|
938M High Lift Fusion Bucket - Bucket width (2018)
|
108 in (2,750 mm)
|
|
938M High Lift Fusion Bucket - Bucket width (2019)
|
108 in (2,750 mm)
|
|
938M High Lift Fusion Bucket - Digging depth (Since 2017)
|
5 in (135 mm)
|
|
938M High Lift Fusion Bucket - Digging depth (2018)
|
5 in (135 mm)
|
|
938M High Lift Fusion Bucket - Digging depth (2019)
|
5 in (135 mm)
|
|
938M High Lift Fusion Bucket - Dump clearance at full lift and 45° discharge (Since 2017)
|
123 in (3,115 mm)
|
|
938M High Lift Fusion Bucket - Dump clearance at full lift and 45° discharge (2018)
|
123 in (3,115 mm)
|
|
938M High Lift Fusion Bucket - Dump clearance at full lift and 45° discharge (2019)
|
123 in (3,115 mm)
|
|
938M High Lift Fusion Bucket - Loader clearance radius with bucket in carry position (Since 2017)
|
260 in (6,613 mm)
|
|
938M High Lift Fusion Bucket - Loader clearance radius with bucket in carry position (2018)
|
260 in (6,613 mm)
|
|
938M High Lift Fusion Bucket - Loader clearance radius with bucket in carry position (2019)
|
260 in (6,613 mm)
|
|
938M High Lift Fusion Bucket - Operating weight (Since 2017)
|
36,954 lbs (16,762 kg)
|
|
938M High Lift Fusion Bucket - Operating weight (2018)
|
36,954 lbs (16,762 kg)
|
|
938M High Lift Fusion Bucket - Operating weight (2019)
|
36,954 lbs (16,762 kg)
|
|
938M High Lift Fusion Bucket - Overall height with bucket at full raise (Since 2017)
|
252 in (6,401 mm)
|
|
938M High Lift Fusion Bucket - Overall height with bucket at full raise (2018)
|
252 in (6,401 mm)
|
|
938M High Lift Fusion Bucket - Overall height with bucket at full raise (2019)
|
252 in (6,401 mm)
|
|
938M High Lift Fusion Bucket - Overall length (Since 2017)
|
350 in (8,887 mm)
|
|
938M High Lift Fusion Bucket - Overall length (2018)
|
350 in (8,887 mm)
|
|
938M High Lift Fusion Bucket - Overall length (2019)
|
350 in (8,887 mm)
|
|
938M High Lift Fusion Bucket - Rated bucket capacity (Since 2017)
|
6 cu yd (5 cu m)
|
|
938M High Lift Fusion Bucket - Rated bucket capacity (2018)
|
6 cu yd (5 cu m)
|
|
938M High Lift Fusion Bucket - Rated bucket capacity (2019)
|
6 cu yd (5 cu m)
|
|
938M High Lift Fusion Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (Since 2017)
|
93 in (2,371 mm)
|
|
938M High Lift Fusion Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2018)
|
93 in (2,371 mm)
|
|
938M High Lift Fusion Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2019)
|
93 in (2,371 mm)
|
|
938M High Lift Fusion Bucket - Reach at full lift and 45° discharge (Since 2017)
|
63 in (1,597 mm)
|
|
938M High Lift Fusion Bucket - Reach at full lift and 45° discharge (2018)
|
63 in (1,597 mm)
|
|
938M High Lift Fusion Bucket - Reach at full lift and 45° discharge (2019)
|
63 in (1,597 mm)
|
|
938M High Lift Fusion Bucket - Reach with lift arms horizontal and bucket level (Since 2017)
|
137 in (3,471 mm)
|
|
938M High Lift Fusion Bucket - Reach with lift arms horizontal and bucket level (2018)
|
137 in (3,471 mm)
|
|
938M High Lift Fusion Bucket - Reach with lift arms horizontal and bucket level (2019)
|
137 in (3,471 mm)
|
|
938M High Lift Fusion Bucket - Static tipping load straight (Since 2017)
|
16,881 lbs (7,657 kg)
|
|
938M High Lift Fusion Bucket - Static tipping load straight (2018)
|
16,881 lbs (7,657 kg)
|
|
938M High Lift Fusion Bucket - Static tipping load straight (2019)
|
16,881 lbs (7,657 kg)
|
|
938M High Lift Fusion Bucket - Static tipping load with 40° turn (Since 2017)
|
14,057 lbs (6,376 kg)
|
|
938M High Lift Fusion Bucket - Static tipping load with 40° turn (2018)
|
14,057 lbs (6,376 kg)
|
|
938M High Lift Fusion Bucket - Static tipping load with 40° turn (2019)
|
14,057 lbs (6,376 kg)
|
|
938M High Lift Fusion Bucket - Struck capacity (Since 2017)
|
6 cu yd (5 cu m)
|
|
938M High Lift Fusion Bucket - Struck capacity (2018)
|
6 cu yd (5 cu m)
|
|
938M High Lift Fusion Bucket - Struck capacity (2019)
|
6 cu yd (5 cu m)
|
|
938M High Lift ISO Bucket - Breakout force (Since 2017)
|
24,101 lbf (10,932 kgf)
|
|
938M High Lift ISO Bucket - Breakout force (Since 2018)
|
24,101 lbf (107 kN)
|
|
938M High Lift ISO Bucket - Breakout force (2019)
|
24,101 lbf (107 kN)
|
|
938M High Lift ISO Bucket - Bucket width (Since 2017)
|
108 in (2,750 mm)
|
|
938M High Lift ISO Bucket - Bucket width (2018)
|
108 in (2,750 mm)
|
|
938M High Lift ISO Bucket - Bucket width (2019)
|
108 in (2,750 mm)
|
|
938M High Lift ISO Bucket - Digging depth (Since 2017)
|
6 in (139 mm)
|
|
938M High Lift ISO Bucket - Digging depth (2018)
|
6 in (139 mm)
|
|
938M High Lift ISO Bucket - Digging depth (2019)
|
6 in (139 mm)
|
|
938M High Lift ISO Bucket - Dump clearance at full lift and 45° discharge (Since 2017)
|
124 in (3,150 mm)
|
|
938M High Lift ISO Bucket - Dump clearance at full lift and 45° discharge (2018)
|
124 in (3,150 mm)
|
|
938M High Lift ISO Bucket - Dump clearance at full lift and 45° discharge (2019)
|
124 in (3,150 mm)
|
|
938M High Lift ISO Bucket - Loader clearance radius with bucket in carry position (Since 2017)
|
260 in (6,616 mm)
|
|
938M High Lift ISO Bucket - Loader clearance radius with bucket in carry position (2018)
|
260 in (6,616 mm)
|
|
938M High Lift ISO Bucket - Loader clearance radius with bucket in carry position (2019)
|
260 in (6,616 mm)
|
|
938M High Lift ISO Bucket - Operating weight (Since 2017)
|
35,997 lbs (16,328 kg)
|
|
938M High Lift ISO Bucket - Operating weight (2018)
|
35,997 lbs (16,328 kg)
|
|
938M High Lift ISO Bucket - Operating weight (2019)
|
35,997 lbs (16,328 kg)
|
|
938M High Lift ISO Bucket - Overall height with bucket at full raise (Since 2017)
|
238 in (6,043 mm)
|
|
938M High Lift ISO Bucket - Overall height with bucket at full raise (2018)
|
238 in (6,043 mm)
|
|
938M High Lift ISO Bucket - Overall height with bucket at full raise (2019)
|
238 in (6,043 mm)
|
|
938M High Lift ISO Bucket - Overall length (Since 2017)
|
345 in (8,755 mm)
|
|
938M High Lift ISO Bucket - Overall length (2018)
|
345 in (8,755 mm)
|
|
938M High Lift ISO Bucket - Overall length (2019)
|
345 in (8,755 mm)
|
|
938M High Lift ISO Bucket - Rated bucket capacity (Since 2017)
|
4 cu yd (3 cu m)
|
|
938M High Lift ISO Bucket - Rated bucket capacity (2018)
|
4 cu yd (3 cu m)
|
|
938M High Lift ISO Bucket - Rated bucket capacity (2019)
|
4 cu yd (3 cu m)
|
|
938M High Lift ISO Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (Since 2017)
|
97 in (2,469 mm)
|
|
938M High Lift ISO Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2018)
|
97 in (2,469 mm)
|
|
938M High Lift ISO Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2019)
|
97 in (2,469 mm)
|
|
938M High Lift ISO Bucket - Reach at full lift and 45° discharge (Since 2017)
|
66 in (1,678 mm)
|
|
938M High Lift ISO Bucket - Reach at full lift and 45° discharge (2018)
|
66 in (1,678 mm)
|
|
938M High Lift ISO Bucket - Reach at full lift and 45° discharge (2019)
|
66 in (1,678 mm)
|
|
938M High Lift ISO Bucket - Reach with lift arms horizontal and bucket level (Since 2017)
|
137 in (3,489 mm)
|
|
938M High Lift ISO Bucket - Reach with lift arms horizontal and bucket level (2018)
|
137 in (3,489 mm)
|
|
938M High Lift ISO Bucket - Reach with lift arms horizontal and bucket level (2019)
|
137 in (3,489 mm)
|
|
938M High Lift ISO Bucket - Static tipping load straight (Since 2017)
|
17,306 lbs (7,850 kg)
|
|
938M High Lift ISO Bucket - Static tipping load straight (2018)
|
17,306 lbs (7,850 kg)
|
|
938M High Lift ISO Bucket - Static tipping load straight (2019)
|
17,306 lbs (7,850 kg)
|
|
938M High Lift ISO Bucket - Static tipping load with 40° turn (Since 2017)
|
14,517 lbs (6,585 kg)
|
|
938M High Lift ISO Bucket - Static tipping load with 40° turn (2018)
|
14,517 lbs (6,585 kg)
|
|
938M High Lift ISO Bucket - Static tipping load with 40° turn (2019)
|
14,517 lbs (6,585 kg)
|
|
938M High Lift ISO Bucket - Struck capacity (Since 2017)
|
3 cu yd (3 cu m)
|
|
938M High Lift ISO Bucket - Struck capacity (2018)
|
3 cu yd (3 cu m)
|
|
938M High Lift ISO Bucket - Struck capacity (2019)
|
3 cu yd (3 cu m)
|
|
938M High Lift Pin On Bucket - Breakout force (Since 2017)
|
22,708 lbf (10,300 kgf)
|
|
938M High Lift Pin On Bucket - Breakout force (Since 2018)
|
22,708 lbf (101 kN)
|
|
938M High Lift Pin On Bucket - Breakout force (2019)
|
22,708 lbf (101 kN)
|
|
938M High Lift Pin On Bucket - Bucket width (Since 2017)
|
108 in (2,750 mm)
|
|
938M High Lift Pin On Bucket - Bucket width (2018)
|
108 in (2,750 mm)
|
|
938M High Lift Pin On Bucket - Bucket width (2019)
|
108 in (2,750 mm)
|
|
938M High Lift Pin On Bucket - Digging depth (Since 2017)
|
5 in (135 mm)
|
|
938M High Lift Pin On Bucket - Digging depth (2018)
|
5 in (135 mm)
|
|
938M High Lift Pin On Bucket - Digging depth (2019)
|
5 in (135 mm)
|
|
938M High Lift Pin On Bucket - Dump clearance at full lift and 45° discharge (Since 2017)
|
124 in (3,152 mm)
|
|
938M High Lift Pin On Bucket - Dump clearance at full lift and 45° discharge (2018)
|
124 in (3,152 mm)
|
|
938M High Lift Pin On Bucket - Dump clearance at full lift and 45° discharge (2019)
|
124 in (3,152 mm)
|
|
938M High Lift Pin On Bucket - Loader clearance radius with bucket in carry position (Since 2017)
|
260 in (6,594 mm)
|
|
938M High Lift Pin On Bucket - Loader clearance radius with bucket in carry position (2018)
|
260 in (6,594 mm)
|
|
938M High Lift Pin On Bucket - Loader clearance radius with bucket in carry position (2019)
|
260 in (6,594 mm)
|
|
938M High Lift Pin On Bucket - Operating weight (Since 2017)
|
35,982 lbs (16,321 kg)
|
|
938M High Lift Pin On Bucket - Operating weight (2018)
|
35,982 lbs (16,321 kg)
|
|
938M High Lift Pin On Bucket - Operating weight (2019)
|
35,982 lbs (16,321 kg)
|
|
938M High Lift Pin On Bucket - Overall height with bucket at full raise (Since 2017)
|
251 in (6,367 mm)
|
|
938M High Lift Pin On Bucket - Overall height with bucket at full raise (2018)
|
251 in (6,367 mm)
|
|
938M High Lift Pin On Bucket - Overall height with bucket at full raise (2019)
|
251 in (6,367 mm)
|
|
938M High Lift Pin On Bucket - Overall length (Since 2017)
|
348 in (8,835 mm)
|
|
938M High Lift Pin On Bucket - Overall length (2018)
|
348 in (8,835 mm)
|
|
938M High Lift Pin On Bucket - Overall length (2019)
|
348 in (8,835 mm)
|
|
938M High Lift Pin On Bucket - Rated bucket capacity (Since 2017)
|
6 cu yd (5 cu m)
|
|
938M High Lift Pin On Bucket - Rated bucket capacity (2018)
|
6 cu yd (5 cu m)
|
|
938M High Lift Pin On Bucket - Rated bucket capacity (2019)
|
6 cu yd (5 cu m)
|
|
938M High Lift Pin On Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (Since 2017)
|
93 in (2,353 mm)
|
|
938M High Lift Pin On Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2018)
|
93 in (2,353 mm)
|
|
938M High Lift Pin On Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2019)
|
93 in (2,353 mm)
|
|
938M High Lift Pin On Bucket - Reach at full lift and 45° discharge (Since 2017)
|
61 in (1,561 mm)
|
|
938M High Lift Pin On Bucket - Reach at full lift and 45° discharge (2018)
|
61 in (1,561 mm)
|
|
938M High Lift Pin On Bucket - Reach at full lift and 45° discharge (2019)
|
61 in (1,561 mm)
|
|
938M High Lift Pin On Bucket - Reach with lift arms horizontal and bucket level (Since 2017)
|
135 in (3,419 mm)
|
|
938M High Lift Pin On Bucket - Reach with lift arms horizontal and bucket level (2018)
|
135 in (3,419 mm)
|
|
938M High Lift Pin On Bucket - Reach with lift arms horizontal and bucket level (2019)
|
135 in (3,419 mm)
|
|
938M High Lift Pin On Bucket - Static tipping load straight (Since 2017)
|
17,897 lbs (8,118 kg)
|
|
938M High Lift Pin On Bucket - Static tipping load straight (2018)
|
17,897 lbs (8,118 kg)
|
|
938M High Lift Pin On Bucket - Static tipping load straight (2019)
|
17,897 lbs (8,118 kg)
|
|
938M High Lift Pin On Bucket - Static tipping load with 40° turn (Since 2017)
|
15,009 lbs (6,808 kg)
|
|
938M High Lift Pin On Bucket - Static tipping load with 40° turn (2018)
|
15,009 lbs (6,808 kg)
|
|
938M High Lift Pin On Bucket - Static tipping load with 40° turn (2019)
|
15,009 lbs (6,808 kg)
|
|
938M High Lift Pin On Bucket - Struck capacity (Since 2017)
|
6 cu yd (5 cu m)
|
|
938M High Lift Pin On Bucket - Struck capacity (2018)
|
6 cu yd (5 cu m)
|
|
938M High Lift Pin On Bucket - Struck capacity (2019)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift - Operating load (Since 2017)
|
5,815 lbs (2,638 kg)
|
|
938M Standard Lift - Operating load (2018)
|
5,815 lbs (2,638 kg)
|
|
938M Standard Lift - Operating load (2019)
|
5,815 lbs (2,638 kg)
|
|
938M Standard Lift - Operating weight (Since 2017)
|
34,831 lbs (15,799 kg)
|
|
938M Standard Lift - Operating weight (2018)
|
34,831 lbs (15,799 kg)
|
|
938M Standard Lift - Operating weight (2019)
|
34,831 lbs (15,799 kg)
|
|
938M Standard Lift - Static tipping load, full 40° turn (Since 2017)
|
11,629 lbs (5,275 kg)
|
|
938M Standard Lift - Static tipping load, full 40° turn (2018)
|
11,629 lbs (5,275 kg)
|
|
938M Standard Lift - Static tipping load, full 40° turn (2019)
|
11,629 lbs (5,275 kg)
|
|
938M Standard Lift - Static tipping load, straight (Since 2017)
|
13,345 lbs (6,053 kg)
|
|
938M Standard Lift - Static tipping load, straight (2018)
|
13,345 lbs (6,053 kg)
|
|
938M Standard Lift - Static tipping load, straight (2019)
|
13,345 lbs (6,053 kg)
|
|
938M Standard Lift Fusion Bucket - Breakout force (Since 2017)
|
22,708 lbf (10,300 kgf)
|
|
938M Standard Lift Fusion Bucket - Breakout force (Since 2018)
|
22,708 lbf (101 kN)
|
|
938M Standard Lift Fusion Bucket - Breakout force (2019)
|
22,708 lbf (101 kN)
|
|
938M Standard Lift Fusion Bucket - Bucket width (Since 2017)
|
108 in (2,750 mm)
|
|
938M Standard Lift Fusion Bucket - Bucket width (2018)
|
108 in (2,750 mm)
|
|
938M Standard Lift Fusion Bucket - Bucket width (2019)
|
108 in (2,750 mm)
|
|
938M Standard Lift Fusion Bucket - Digging depth (Since 2017)
|
4 in (101 mm)
|
|
938M Standard Lift Fusion Bucket - Digging depth (2018)
|
4 in (101 mm)
|
|
938M Standard Lift Fusion Bucket - Digging depth (2019)
|
4 in (101 mm)
|
|
938M Standard Lift Fusion Bucket - Dump clearance at full lift and 45° discharge (Since 2017)
|
100 in (2,534 mm)
|
|
938M Standard Lift Fusion Bucket - Dump clearance at full lift and 45° discharge (2018)
|
100 in (2,534 mm)
|
|
938M Standard Lift Fusion Bucket - Dump clearance at full lift and 45° discharge (2019)
|
100 in (2,534 mm)
|
|
938M Standard Lift Fusion Bucket - Loader clearance radius with bucket in carry position (Since 2017)
|
246 in (6,244 mm)
|
|
938M Standard Lift Fusion Bucket - Loader clearance radius with bucket in carry position (2018)
|
246 in (6,244 mm)
|
|
938M Standard Lift Fusion Bucket - Loader clearance radius with bucket in carry position (2019)
|
246 in (6,244 mm)
|
|
938M Standard Lift Fusion Bucket - Operating weight (Since 2017)
|
37,179 lbs (16,864 kg)
|
|
938M Standard Lift Fusion Bucket - Operating weight (2018)
|
37,179 lbs (16,864 kg)
|
|
938M Standard Lift Fusion Bucket - Operating weight (2019)
|
37,179 lbs (16,864 kg)
|
|
938M Standard Lift Fusion Bucket - Overall height with bucket at full raise (Since 2017)
|
229 in (5,820 mm)
|
|
938M Standard Lift Fusion Bucket - Overall height with bucket at full raise (2018)
|
229 in (5,820 mm)
|
|
938M Standard Lift Fusion Bucket - Overall height with bucket at full raise (2019)
|
229 in (5,820 mm)
|
|
938M Standard Lift Fusion Bucket - Overall length (Since 2017)
|
321 in (8,142 mm)
|
|
938M Standard Lift Fusion Bucket - Overall length (2018)
|
321 in (8,142 mm)
|
|
938M Standard Lift Fusion Bucket - Overall length (2019)
|
321 in (8,142 mm)
|
|
938M Standard Lift Fusion Bucket - Rated bucket capacity (Since 2017)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Fusion Bucket - Rated bucket capacity (2018)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Fusion Bucket - Rated bucket capacity (2019)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Fusion Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (Since 2017)
|
66 in (1,666 mm)
|
|
938M Standard Lift Fusion Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2018)
|
66 in (1,666 mm)
|
|
938M Standard Lift Fusion Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2019)
|
66 in (1,666 mm)
|
|
938M Standard Lift Fusion Bucket - Reach at full lift and 45° discharge (Since 2017)
|
52 in (1,331 mm)
|
|
938M Standard Lift Fusion Bucket - Reach at full lift and 45° discharge (2018)
|
52 in (1,331 mm)
|
|
938M Standard Lift Fusion Bucket - Reach at full lift and 45° discharge (2019)
|
52 in (1,331 mm)
|
|
938M Standard Lift Fusion Bucket - Reach with lift arms horizontal and bucket level (Since 2017)
|
113 in (2,864 mm)
|
|
938M Standard Lift Fusion Bucket - Reach with lift arms horizontal and bucket level (2018)
|
113 in (2,864 mm)
|
|
938M Standard Lift Fusion Bucket - Reach with lift arms horizontal and bucket level (2019)
|
113 in (2,864 mm)
|
|
938M Standard Lift Fusion Bucket - Static tipping load straight (Since 2017)
|
24,434 lbs (11,083 kg)
|
|
938M Standard Lift Fusion Bucket - Static tipping load straight (2018)
|
24,434 lbs (11,083 kg)
|
|
938M Standard Lift Fusion Bucket - Static tipping load straight (2019)
|
24,434 lbs (11,083 kg)
|
|
938M Standard Lift Fusion Bucket - Static tipping load with 40° turn (Since 2017)
|
20,607 lbs (9,347 kg)
|
|
938M Standard Lift Fusion Bucket - Static tipping load with 40° turn (2018)
|
20,607 lbs (9,347 kg)
|
|
938M Standard Lift Fusion Bucket - Static tipping load with 40° turn (2019)
|
20,607 lbs (9,347 kg)
|
|
938M Standard Lift Fusion Bucket - Struck capacity (Since 2017)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Fusion Bucket - Struck capacity (2018)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Fusion Bucket - Struck capacity (2019)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift ISO Bucket - Breakout force (Since 2017)
|
25,104 lbf (11,387 kgf)
|
|
938M Standard Lift ISO Bucket - Breakout force (Since 2018)
|
25,104 lbf (112 kN)
|
|
938M Standard Lift ISO Bucket - Breakout force (2019)
|
25,104 lbf (112 kN)
|
|
938M Standard Lift ISO Bucket - Bucket width (Since 2017)
|
108 in (2,750 mm)
|
|
938M Standard Lift ISO Bucket - Bucket width (2018)
|
108 in (2,750 mm)
|
|
938M Standard Lift ISO Bucket - Bucket width (2019)
|
108 in (2,750 mm)
|
|
938M Standard Lift ISO Bucket - Digging depth (Since 2017)
|
4 in (105 mm)
|
|
938M Standard Lift ISO Bucket - Digging depth (2018)
|
4 in (105 mm)
|
|
938M Standard Lift ISO Bucket - Digging depth (2019)
|
4 in (105 mm)
|
|
938M Standard Lift ISO Bucket - Dump clearance at full lift and 45° discharge (Since 2017)
|
101 in (2,569 mm)
|
|
938M Standard Lift ISO Bucket - Dump clearance at full lift and 45° discharge (2018)
|
101 in (2,569 mm)
|
|
938M Standard Lift ISO Bucket - Dump clearance at full lift and 45° discharge (2019)
|
101 in (2,569 mm)
|
|
938M Standard Lift ISO Bucket - Loader clearance radius with bucket in carry position (Since 2017)
|
246 in (6,237 mm)
|
|
938M Standard Lift ISO Bucket - Loader clearance radius with bucket in carry position (2018)
|
246 in (6,237 mm)
|
|
938M Standard Lift ISO Bucket - Loader clearance radius with bucket in carry position (2019)
|
246 in (6,237 mm)
|
|
938M Standard Lift ISO Bucket - Operating weight (Since 2017)
|
36,222 lbs (16,430 kg)
|
|
938M Standard Lift ISO Bucket - Operating weight (2018)
|
36,222 lbs (16,430 kg)
|
|
938M Standard Lift ISO Bucket - Operating weight (2019)
|
36,222 lbs (16,430 kg)
|
|
938M Standard Lift ISO Bucket - Overall height with bucket at full raise (Since 2017)
|
215 in (5,462 mm)
|
|
938M Standard Lift ISO Bucket - Overall height with bucket at full raise (2018)
|
215 in (5,462 mm)
|
|
938M Standard Lift ISO Bucket - Overall height with bucket at full raise (2019)
|
215 in (5,462 mm)
|
|
938M Standard Lift ISO Bucket - Overall length (Since 2017)
|
315 in (8,007 mm)
|
|
938M Standard Lift ISO Bucket - Overall length (2018)
|
315 in (8,007 mm)
|
|
938M Standard Lift ISO Bucket - Overall length (2019)
|
315 in (8,007 mm)
|
|
938M Standard Lift ISO Bucket - Rated bucket capacity (Since 2017)
|
4 cu yd (3 cu m)
|
|
938M Standard Lift ISO Bucket - Rated bucket capacity (2018)
|
4 cu yd (3 cu m)
|
|
938M Standard Lift ISO Bucket - Rated bucket capacity (2019)
|
4 cu yd (3 cu m)
|
|
938M Standard Lift ISO Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (Since 2017)
|
70 in (1,770 mm)
|
|
938M Standard Lift ISO Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2018)
|
70 in (1,770 mm)
|
|
938M Standard Lift ISO Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2019)
|
70 in (1,770 mm)
|
|
938M Standard Lift ISO Bucket - Reach at full lift and 45° discharge (Since 2017)
|
56 in (1,411 mm)
|
|
938M Standard Lift ISO Bucket - Reach at full lift and 45° discharge (2018)
|
56 in (1,411 mm)
|
|
938M Standard Lift ISO Bucket - Reach at full lift and 45° discharge (2019)
|
56 in (1,411 mm)
|
|
938M Standard Lift ISO Bucket - Reach with lift arms horizontal and bucket level (Since 2017)
|
113 in (2,882 mm)
|
|
938M Standard Lift ISO Bucket - Reach with lift arms horizontal and bucket level (2018)
|
113 in (2,882 mm)
|
|
938M Standard Lift ISO Bucket - Reach with lift arms horizontal and bucket level (2019)
|
113 in (2,882 mm)
|
|
938M Standard Lift ISO Bucket - Static tipping load straight (Since 2017)
|
24,548 lbs (11,135 kg)
|
|
938M Standard Lift ISO Bucket - Static tipping load straight (2018)
|
24,548 lbs (11,135 kg)
|
|
938M Standard Lift ISO Bucket - Static tipping load straight (2019)
|
24,548 lbs (11,135 kg)
|
|
938M Standard Lift ISO Bucket - Static tipping load with 40° turn (Since 2017)
|
20,796 lbs (9,433 kg)
|
|
938M Standard Lift ISO Bucket - Static tipping load with 40° turn (2018)
|
20,796 lbs (9,433 kg)
|
|
938M Standard Lift ISO Bucket - Static tipping load with 40° turn (2019)
|
20,796 lbs (9,433 kg)
|
|
938M Standard Lift ISO Bucket - Struck capacity (Since 2017)
|
3 cu yd (3 cu m)
|
|
938M Standard Lift ISO Bucket - Struck capacity (2018)
|
3 cu yd (3 cu m)
|
|
938M Standard Lift ISO Bucket - Struck capacity (2019)
|
3 cu yd (3 cu m)
|
|
938M Standard Lift Pin On Bucket - Breakout force (Since 2017)
|
23,651 lbf (10,728 kgf)
|
|
938M Standard Lift Pin On Bucket - Breakout force (Since 2018)
|
23,651 lbf (105 kN)
|
|
938M Standard Lift Pin On Bucket - Breakout force (2019)
|
23,651 lbf (105 kN)
|
|
938M Standard Lift Pin On Bucket - Bucket width (Since 2017)
|
108 in (2,750 mm)
|
|
938M Standard Lift Pin On Bucket - Bucket width (2018)
|
108 in (2,750 mm)
|
|
938M Standard Lift Pin On Bucket - Bucket width (2019)
|
108 in (2,750 mm)
|
|
938M Standard Lift Pin On Bucket - Digging depth (Since 2017)
|
4 in (100 mm)
|
|
938M Standard Lift Pin On Bucket - Digging depth (2018)
|
4 in (100 mm)
|
|
938M Standard Lift Pin On Bucket - Digging depth (2019)
|
4 in (100 mm)
|
|
938M Standard Lift Pin On Bucket - Dump clearance at full lift and 45° discharge (Since 2017)
|
101 in (2,571 mm)
|
|
938M Standard Lift Pin On Bucket - Dump clearance at full lift and 45° discharge (2018)
|
101 in (2,571 mm)
|
|
938M Standard Lift Pin On Bucket - Dump clearance at full lift and 45° discharge (2019)
|
101 in (2,571 mm)
|
|
938M Standard Lift Pin On Bucket - Loader clearance radius with bucket in carry position (Since 2017)
|
245 in (6,227 mm)
|
|
938M Standard Lift Pin On Bucket - Loader clearance radius with bucket in carry position (2018)
|
245 in (6,227 mm)
|
|
938M Standard Lift Pin On Bucket - Loader clearance radius with bucket in carry position (2019)
|
245 in (6,227 mm)
|
|
938M Standard Lift Pin On Bucket - Operating weight (Since 2017)
|
36,206 lbs (16,423 kg)
|
|
938M Standard Lift Pin On Bucket - Operating weight (2018)
|
36,206 lbs (16,423 kg)
|
|
938M Standard Lift Pin On Bucket - Operating weight (2019)
|
36,206 lbs (16,423 kg)
|
|
938M Standard Lift Pin On Bucket - Overall height with bucket at full raise (Since 2017)
|
228 in (5,786 mm)
|
|
938M Standard Lift Pin On Bucket - Overall height with bucket at full raise (2018)
|
228 in (5,786 mm)
|
|
938M Standard Lift Pin On Bucket - Overall height with bucket at full raise (2019)
|
228 in (5,786 mm)
|
|
938M Standard Lift Pin On Bucket - Overall length (Since 2017)
|
318 in (8,089 mm)
|
|
938M Standard Lift Pin On Bucket - Overall length (2018)
|
318 in (8,089 mm)
|
|
938M Standard Lift Pin On Bucket - Overall length (2019)
|
318 in (8,089 mm)
|
|
938M Standard Lift Pin On Bucket - Rated bucket capacity (Since 2017)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Pin On Bucket - Rated bucket capacity (2018)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Pin On Bucket - Rated bucket capacity (2019)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Pin On Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (Since 2017)
|
65 in (1,654 mm)
|
|
938M Standard Lift Pin On Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2018)
|
65 in (1,654 mm)
|
|
938M Standard Lift Pin On Bucket - Reach at 45° discharge and 2130 mm (7'0") clearance (2019)
|
65 in (1,654 mm)
|
|
938M Standard Lift Pin On Bucket - Reach at full lift and 45° discharge (Since 2017)
|
51 in (1,294 mm)
|
|
938M Standard Lift Pin On Bucket - Reach at full lift and 45° discharge (2018)
|
51 in (1,294 mm)
|
|
938M Standard Lift Pin On Bucket - Reach at full lift and 45° discharge (2019)
|
51 in (1,294 mm)
|
|
938M Standard Lift Pin On Bucket - Reach with lift arms horizontal and bucket level (Since 2017)
|
111 in (2,812 mm)
|
|
938M Standard Lift Pin On Bucket - Reach with lift arms horizontal and bucket level (2018)
|
111 in (2,812 mm)
|
|
938M Standard Lift Pin On Bucket - Reach with lift arms horizontal and bucket level (2019)
|
111 in (2,812 mm)
|
|
938M Standard Lift Pin On Bucket - Static tipping load straight (Since 2017)
|
25,571 lbs (11,599 kg)
|
|
938M Standard Lift Pin On Bucket - Static tipping load straight (2018)
|
25,571 lbs (11,599 kg)
|
|
938M Standard Lift Pin On Bucket - Static tipping load straight (2019)
|
25,571 lbs (11,599 kg)
|
|
938M Standard Lift Pin On Bucket - Static tipping load with 40° turn (Since 2017)
|
21,669 lbs (9,829 kg)
|
|
938M Standard Lift Pin On Bucket - Static tipping load with 40° turn (2018)
|
21,669 lbs (9,829 kg)
|
|
938M Standard Lift Pin On Bucket - Static tipping load with 40° turn (2019)
|
21,669 lbs (9,829 kg)
|
|
938M Standard Lift Pin On Bucket - Struck capacity (Since 2017)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Pin On Bucket - Struck capacity (2018)
|
6 cu yd (5 cu m)
|
|
938M Standard Lift Pin On Bucket - Struck capacity (2019)
|
6 cu yd (5 cu m)
|
|
A Maximum overall length (Since 2016)
|
348 in (8,845 mm)
|
|
A Maximum overall length (2017)
|
348 in (8,845 mm)
|
|
A Maximum overall length (2018)
|
348 in (8,845 mm)
|
|
A Maximum overall length (2019)
|
348 in (8,845 mm)
|
|
A Maximum overall length** (Since 2018)
|
331 in (8,397 mm)
|
|
A Reach horizontal (retracted) (Since 2016)
|
149 in (3,775 mm)
|
|
A Reach horizontal (retracted) (2017)
|
149 in (3,775 mm)
|
|
A Reach horizontal (retracted) (2018)
|
149 in (3,775 mm)
|
|
A Reach horizontal (retracted) (2019)
|
149 in (3,775 mm)
|
|
B Reach horizontal (mid-position) (Since 2016)
|
180 in (4,575 mm)
|
|
B Reach horizontal (mid-position) (2017)
|
180 in (4,575 mm)
|
|
B Reach horizontal (mid-position) (2018)
|
180 in (4,575 mm)
|
|
B Reach horizontal (mid-position) (2019)
|
180 in (4,575 mm)
|
|
B Reach with forks at ground level (Since 2016)
|
67 in (1,714 mm)
|
|
B Reach with forks at ground level (2017)
|
67 in (1,714 mm)
|
|
B Reach with forks at ground level (2018)
|
67 in (1,714 mm)
|
|
B Reach with forks at ground level (2019)
|
67 in (1,714 mm)
|
|
B Wheel base (Since 2016)
|
120 in (3,050 mm)
|
|
B Wheel base (2017)
|
120 in (3,050 mm)
|
|
B Wheel base (2018)
|
120 in (3,050 mm)
|
|
B Wheel base (2019)
|
120 in (3,050 mm)
|
|
Bore (Since 2016)
|
4 in (105 mm)
|
|
Bore (2017)
|
4 in (105 mm)
|
|
Bore (2018)
|
4 in (105 mm)
|
|
Bore (2019)
|
4 in (105 mm)
|
|
Breakout force (Since 2016)
|
22,803 lbf (101 kN)
|
|
Breakout force (Since 2017)
|
22,803 lbf (10,343 kgf)
|
|
Breakout force (Since 2018)
|
22,803 lbf (101 kN)
|
|
Breakout force (2019)
|
22,803 lbf (101 kN)
|
|
Breakout Force (Since 2023)
|
29,028 lbf |
|
Breakout force [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
30,453 lbf (135 kN)
|
|
Breakout force [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
30,453 lbf (135 kN)
|
|
Breakout force [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
28,841 lbf (128 kN)
|
|
Breakout force [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
28,841 lbf (128 kN)
|
|
Breakout force [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
27,673 lbf (123 kN)
|
|
Breakout force [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
27,673 lbf (123 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2016)
|
30,206 lbf (134 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
30,206 lbf (134 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2016)
|
28,596 lbf (127 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
28,596 lbf (127 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2016)
|
27,428 lbf (122 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
27,428 lbf (122 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (Since 2016)
|
32,276 lbf (144 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2019)
|
32,276 lbf (144 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (Since 2016)
|
30,470 lbf (136 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2019)
|
30,470 lbf (136 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (Since 2016)
|
29,165 lbf (130 kN)
|
|
Breakout force [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2019)
|
29,165 lbf (130 kN)
|
|
Bucket (Since 2016)
|
3 cu yd (3 cu m)
|
|
Bucket (2017)
|
3 cu yd (3 cu m)
|
|
Bucket (2018)
|
3 cu yd (3 cu m)
|
|
Bucket (2019)
|
3 cu yd (3 cu m)
|
|
Bucket - Dozing (Since 2016)
|
x |
|
Bucket - Dozing (2017)
|
x |
|
Bucket - Dozing (2018)
|
x |
|
Bucket - Dozing (2019)
|
x |
|
Bucket - Load & Carry (Since 2016)
|
x |
|
Bucket - Load & Carry (2017)
|
x |
|
Bucket - Load & Carry (2018)
|
x |
|
Bucket - Load & Carry (2019)
|
x |
|
Bucket - Multi-Purpose (Since 2016)
|
x |
|
Bucket - Multi-Purpose (2017)
|
x |
|
Bucket - Multi-Purpose (2018)
|
x |
|
Bucket - Multi-Purpose (2019)
|
x |
|
Bucket - Waste Handling (Since 2016)
|
x |
|
Bucket - Waste Handling (2017)
|
x |
|
Bucket - Waste Handling (2019)
|
x |
|
Bucket - Waste Handling* (Since 2018)
|
x |
|
Bucket Capacity (Since 2016)
|
3.3 - 6.5 |
|
Bucket Capacity (Since 2017)
|
3.3 - 6.5 (2.5 - 5.0) |
|
Bucket Capacity (Since 2018)
|
3 - 4 cu yd (2 - 3 cu m)
|
|
Bucket Capacity (Since 2019)
|
3.3 - 6.5 (2.5 - 5.0) |
|
Bucket Capacity (2020)
|
3.3 - 6.5 (2.5 - 5.0) |
|
Bucket Capacity (2021)
|
3.3 - 6.5 (2.5 - 5.0) |
|
Bucket Capacity (2022)
|
3.3 - 6.5 (2.5 - 5.0) |
|
Bucket Capacity (2023)
|
3.3 - 6.5 (2.5 - 5.0) |
|
Bucket Capacity (Since 2024)
|
3.9 - 6.5 yd³ |
|
Bucket Capacity (2025)
|
3.9 - 6.5 yd³ |
|
Bucket Weight (Since 2016)
|
2,134 - 2,330 lbs (968 - 1,059 kg)
|
|
Bucket Weight (Since 2017)
|
2,596 - 3,038 lbs (1,178 - 1,378 kg)
|
|
Bucket Weight (2018)
|
2,596 - 3,038 lbs (1,178 - 1,378 kg)
|
|
Bucket Weight (2019)
|
2,596 - 3,038 lbs (1,178 - 1,378 kg)
|
|
Bucket Width (Since 2016)
|
100 - 120 in (2,528 - 3,032 mm)
|
|
Bucket Width (2017)
|
100 - 120 in (2,528 - 3,032 mm)
|
|
Bucket Width (2018)
|
100 - 120 in (2,528 - 3,032 mm)
|
|
Bucket Width (2019)
|
100 - 120 in (2,528 - 3,032 mm)
|
|
Bucket width [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2019)
|
108 in (2,750 mm)
|
|
C Load center (Since 2016)
|
27 in (685 mm)
|
|
C Load center (2017)
|
27 in (685 mm)
|
|
C Load center (2018)
|
27 in (685 mm)
|
|
C Load center (Since 2019)
|
27 in (685 sq mm)
|
|
C Machine center point to front axle (Since 2016)
|
60 in (1,525 mm)
|
|
C Machine center point to front axle (2017)
|
60 in (1,525 mm)
|
|
C Machine center point to front axle (2018)
|
60 in (1,525 mm)
|
|
C Machine center point to front axle (2019)
|
60 in (1,525 mm)
|
|
C Reach horizontal (extended) (Since 2016)
|
99 in (2,512 mm)
|
|
C Reach horizontal (extended) (2017)
|
99 in (2,512 mm)
|
|
C Reach horizontal (extended) (2018)
|
99 in (2,512 mm)
|
|
C Reach horizontal (extended) (2019)
|
99 in (2,512 mm)
|
|
D Reach full down (retracted) (Since 2016)
|
42 in (1,089 mm)
|
|
D Reach full down (retracted) (2017)
|
42 in (1,089 mm)
|
|
D Reach full down (retracted) (2018)
|
42 in (1,089 mm)
|
|
D Reach full down (retracted) (2019)
|
42 in (1,089 mm)
|
|
D Reach with arms horizontal and - forks level (Since 2016)
|
88 in (2,224 mm)
|
|
D Reach with arms horizontal and - forks level (2017)
|
88 in (2,224 mm)
|
|
D Reach with arms horizontal and - forks level (2018)
|
88 in (2,224 mm)
|
|
D Reach with arms horizontal and - forks level (2019)
|
88 in (2,224 mm)
|
|
D Rear axle to counterweight (Since 2016)
|
77 in (1,968 mm)
|
|
D Rear axle to counterweight (2017)
|
77 in (1,968 mm)
|
|
D Rear axle to counterweight (2018)
|
77 in (1,968 mm)
|
|
D Rear axle to counterweight (2019)
|
77 in (1,968 mm)
|
|
Digging depth (Since 2016)
|
6 in (139 mm)
|
|
Digging depth (2017)
|
6 in (139 mm)
|
|
Digging depth (2018)
|
6 in (139 mm)
|
|
Digging depth (2019)
|
6 in (139 mm)
|
|
Digging depth [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2019)
|
4 in (100 mm)
|
|
Digging depth [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2019)
|
4 in (112 mm)
|
|
Dump clearance at full lift and 45° discharge (Since 2016)
|
124 in (3,150 mm)
|
|
Dump clearance at full lift and 45° discharge (2017)
|
124 in (3,150 mm)
|
|
Dump clearance at full lift and 45° discharge (2018)
|
124 in (3,150 mm)
|
|
Dump clearance at full lift and 45° discharge (2019)
|
124 in (3,150 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
113 in (2,869 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
113 in (2,869 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
113 in (2,869 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
111 in (2,822 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
111 in (2,822 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
111 in (2,822 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
110 in (2,786 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
110 in (2,786 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
110 in (2,786 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2018)
|
109 in (2,764 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
109 in (2,764 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2018)
|
107 in (2,716 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
107 in (2,716 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2018)
|
106 in (2,680 mm)
|
|
Dump clearance at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
106 in (2,680 mm)
|
|
Emission Standards (Since 2016)
|
Tier 4 Final |
|
Emission Standards (2017)
|
Tier 4 Final |
|
Emission Standards (2018)
|
Tier 4 Final |
|
Emission Standards (2019)
|
Tier 4 Final |
|
Engine (Since 2023)
|
C7.1 |
|
Engine Displacement (Since 2016)
|
427 cu in (7 L)
|
|
Engine Displacement (2017)
|
427 cu in (7 L)
|
|
Engine Displacement (2018)
|
427 cu in (7 L)
|
|
Engine Displacement (2019)
|
427 cu in (7 L)
|
|
Engine Model (Since 2016)
|
C7.1 ACERT |
|
Engine Model (2017)
|
C7.1 ACERT |
|
Engine Model (2018)
|
C7.1 ACERT |
|
Engine Model (2019)
|
C7.1 ACERT |
|
Engine Power (Since 2016)
|
188 hp (140 kw)
|
|
Engine Power (2017)
|
188 hp (140 kw)
|
|
Engine Power (2019)
|
188 hp (140 kw)
|
|
Engine Power (2020)
|
188 hp (140 kw)
|
|
Engine Power (2021)
|
188 hp (140 kw)
|
|
Engine Power (2022)
|
188 hp (140 kw)
|
|
Engine Power (2023)
|
188 hp (140 kw)
|
|
Engine type (Since 2016)
|
Cat C7.1 ACERT |
|
Engine type (2017)
|
Cat C7.1 ACERT |
|
Engine type (2019)
|
Cat C7.1 ACERT |
|
Engine type (Since 2020)
|
Cat C7.1 |
|
Engine type (2021)
|
Cat C7.1 |
|
Engine type (2022)
|
Cat C7.1 |
|
Engine type (2023)
|
Cat C7.1 |
|
F Arms horizontal and forks level (Since 2016)
|
72 in (1,830 mm)
|
|
F Arms horizontal and forks level (2017)
|
72 in (1,830 mm)
|
|
F Arms horizontal and forks level (2018)
|
72 in (1,830 mm)
|
|
F Arms horizontal and forks level (2019)
|
72 in (1,830 mm)
|
|
F Height to top of engine compartment (Since 2016)
|
88 in (2,235 mm)
|
|
F Height to top of engine compartment (2017)
|
88 in (2,235 mm)
|
|
F Height to top of engine compartment (2018)
|
88 in (2,235 mm)
|
|
F Height to top of engine compartment (2019)
|
88 in (2,235 mm)
|
|
F Reach full down (extended) (Since 2016)
|
61 in (1,559 mm)
|
|
F Reach full down (extended) (2017)
|
61 in (1,559 mm)
|
|
F Reach full down (extended) (2018)
|
61 in (1,559 mm)
|
|
F Reach full down (extended) (2019)
|
61 in (1,559 mm)
|
|
Flywheel Power (Since 2016)
|
182 hp (136 kW)
|
|
Flywheel Power (2017)
|
182 hp (136 kW)
|
|
Flywheel Power (2018)
|
182 hp (136 kW)
|
|
Flywheel Power (2019)
|
182 hp (136 kW)
|
|
Fork tine length (Since 2016)
|
72 in (1,829 mm)
|
|
Fork tine length (2017)
|
72 in (1,829 mm)
|
|
Fork tine length (2018)
|
72 in (1,829 mm)
|
|
Fork tine length (2019)
|
72 in (1,829 mm)
|
|
Forward and Reverse Speed - 1st (Since 2018)
|
1 - 8 mph (1 - 13 km/h)
|
|
Forward and Reverse Speed - 1st (2019)
|
1 - 8 mph (1 - 13 km/h)
|
|
Forward and Reverse Speed - 2nd (Since 2018)
|
8 mph (13 km/h)
|
|
Forward and Reverse Speed - 2nd (2019)
|
8 mph (13 km/h)
|
|
Forward and Reverse Speed - 3rd (Since 2018)
|
17 mph (27 km/h)
|
|
Forward and Reverse Speed - 3rd (2019)
|
17 mph (27 km/h)
|
|
Forward and Reverse Speed - 4th (Since 2018)
|
25 mph (40 km/h)
|
|
Forward and Reverse Speed - 4th (2019)
|
25 mph (40 km/h)
|
|
Fuel Tank Capacity (Since 2016)
|
52 US gal (195 L)
|
|
Fuel Tank Capacity (2017)
|
52 US gal (195 L)
|
|
Fuel Tank Capacity (2018)
|
52 US gal (195 L)
|
|
Fuel Tank Capacity (2019)
|
52 US gal (195 L)
|
|
Full-Turn Tipping Load (Since 2023)
|
21,934 lb |
|
G Clearance horizontal (Since 2016)
|
74 in (1,890 mm)
|
|
G Clearance horizontal (2017)
|
74 in (1,890 mm)
|
|
G Clearance horizontal (2018)
|
74 in (1,890 mm)
|
|
G Clearance horizontal (2019)
|
74 in (1,890 mm)
|
|
G Ground to top of tine at - maximum height (Since 2016)
|
171 in (4,339 mm)
|
|
G Ground to top of tine at - maximum height (2017)
|
171 in (4,339 mm)
|
|
G Ground to top of tine at - maximum height (2018)
|
171 in (4,339 mm)
|
|
G Ground to top of tine at - maximum height (2019)
|
171 in (4,339 mm)
|
|
G Height to top of ROPS (Since 2016)
|
131 in (3,340 mm)
|
|
G Height to top of ROPS (2017)
|
131 in (3,340 mm)
|
|
G Height to top of ROPS (2019)
|
131 in (3,340 mm)
|
|
G Height to top of ROPS*** (Since 2018)
|
131 in (3,340 mm)
|
|
Ground clearance (Since 2016)
|
15 in (386 mm)
|
|
Ground clearance (2017)
|
15 in (386 mm)
|
|
Ground Clearance (Since 2018)
|
15 in (386 mm)
|
|
Ground clearance (Since 2019)
|
15 in (386 mm)
|
|
Ground Clearance** (Since 2018)
|
15 in (386 mm)
|
|
Ground clearance*** (Since 2018)
|
15 in (386 mm)
|
|
Ground to top of tine clearance (Since 2016)
|
168 in (4,274 mm)
|
|
Ground to top of tine clearance (2017)
|
168 in (4,274 mm)
|
|
Ground to top of tine clearance (2018)
|
168 in (4,274 mm)
|
|
Ground to top of tine clearance (2019)
|
168 in (4,274 mm)
|
|
H Clearance full down (retracted) (Since 2016)
|
91 in (2,316 mm)
|
|
H Clearance full down (retracted) (2017)
|
91 in (2,316 mm)
|
|
H Clearance full down (retracted) (2018)
|
91 in (2,316 mm)
|
|
H Clearance full down (retracted) (2019)
|
91 in (2,316 mm)
|
|
H Fork tine length (Since 2016)
|
54 in (1,370 mm)
|
|
H Fork tine length (2017)
|
54 in (1,370 mm)
|
|
H Fork tine length (2018)
|
54 in (1,370 mm)
|
|
H Fork tine length (2019)
|
54 in (1,370 mm)
|
|
H Height to top of stack (Since 2016)
|
127 in (3,223 mm)
|
|
H Height to top of stack (2017)
|
127 in (3,223 mm)
|
|
H Height to top of stack (2018)
|
127 in (3,223 mm)
|
|
H Height to top of stack (2019)
|
127 in (3,223 mm)
|
|
Hinge Pin Height - Full Lift Std. (Since 2016)
|
156 in (3,969 mm)
|
|
Hinge Pin Height - Full Lift Std. (2017)
|
156 in (3,969 mm)
|
|
Hinge Pin Height - Full Lift Std. (2018)
|
156 in (3,969 mm)
|
|
Hinge Pin Height - Full Lift Std. (2019)
|
156 in (3,969 mm)
|
|
Hinge Pin Height - High Lift (Since 2016)
|
179 in (4,550 mm)
|
|
Hinge Pin Height - High Lift (2017)
|
179 in (4,550 mm)
|
|
Hinge Pin Height - High Lift (2018)
|
179 in (4,550 mm)
|
|
Hinge Pin Height - High Lift (2019)
|
179 in (4,550 mm)
|
|
Hydraulic Cycle Time - Rated Load in Bucket - Dump (Since 2016)
|
2 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Dump (2017)
|
2 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Dump (2018)
|
2 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Dump (2019)
|
2 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Lower (empty, float down) (Since 2016)
|
3 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Lower (empty, float down) (2017)
|
3 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Lower (empty, float down) (2018)
|
3 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Lower (empty, float down) (2019)
|
3 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Raise (Since 2016)
|
6 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Raise (2017)
|
6 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Raise (2018)
|
6 sec |
|
Hydraulic Cycle Time - Rated Load in Bucket - Raise (2019)
|
6 sec |
|
Hydraulic Cycle Time - Total (Since 2016)
|
10 sec |
|
Hydraulic Cycle Time - Total (2017)
|
10 sec |
|
Hydraulic Cycle Time - Total (2018)
|
10 sec |
|
Hydraulic Cycle Time - Total (2019)
|
10 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Dump (Since 2016)
|
2 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Dump (2017)
|
2 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Dump (2019)
|
2 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Lower (Empty, Float Down) (Since 2016)
|
3 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Lower (Empty, Float Down) (2017)
|
3 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Lower (Empty, Float Down) (2019)
|
3 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Raise (Since 2016)
|
6 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Raise (2017)
|
6 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Raise (2019)
|
6 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Total (Since 2016)
|
10 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Total (2017)
|
10 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket: - Total (2019)
|
10 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket:* - Dump (Since 2018)
|
2 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket:* - Lower (Empty, Float Down) (Since 2018)
|
3 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket:* - Raise (Since 2018)
|
6 sec |
|
Hydraulic Cycle Time, - Rated Load in Bucket:* - Total (Since 2018)
|
10 sec |
|
Hydraulic System Capacity - (includes tank) (Since 2016)
|
42 US gal (160 L)
|
|
Hydraulic System Capacity - (includes tank) (2017)
|
42 US gal (160 L)
|
|
Hydraulic System Capacity - (includes tank) (2018)
|
42 US gal (160 L)
|
|
Hydraulic System Capacity - (includes tank) (2019)
|
42 US gal (160 L)
|
|
Hydraulic Tank Capacity (Since 2016)
|
24 US gal (90 L)
|
|
Hydraulic Tank Capacity (2017)
|
24 US gal (90 L)
|
|
Hydraulic Tank Capacity (2018)
|
24 US gal (90 L)
|
|
Hydraulic Tank Capacity (2019)
|
24 US gal (90 L)
|
|
J Clearance full down (mid-position) (Since 2016)
|
121 in (3,081 mm)
|
|
J Clearance full down (mid-position) (2017)
|
121 in (3,081 mm)
|
|
J Clearance full down (mid-position) (2018)
|
121 in (3,081 mm)
|
|
J Clearance full down (mid-position) (2019)
|
121 in (3,081 mm)
|
|
J Tire Radius (empty machine) (Since 2016)
|
27 in (685 mm)
|
|
J Tire Radius (empty machine) (2017)
|
27 in (685 mm)
|
|
J Tire Radius (empty machine) (Since 2019)
|
27 in (685 sq mm)
|
|
J Tire Radius (empty machine)*** (Since 2018)
|
27 in (685 mm)
|
|
K Clearance full down (extended) (Since 2016)
|
151 in (3,846 mm)
|
|
K Clearance full down (extended) (2017)
|
151 in (3,846 mm)
|
|
K Clearance full down (extended) (2018)
|
151 in (3,846 mm)
|
|
K Clearance full down (extended) (2019)
|
151 in (3,846 mm)
|
|
K Maximum digging depth (bucket level) (Since 2016)
|
5 in (135 mm)
|
|
K Maximum digging depth (bucket level) (2017)
|
5 in (135 mm)
|
|
K Maximum digging depth (bucket level) (2019)
|
5 in (135 mm)
|
|
K Maximum digging depth (bucket level)*** (Since 2018)
|
5 in (135 mm)
|
|
L Maximum rollback at carry height (Since 2016)
|
50 deg |
|
L Maximum rollback at carry height (2017)
|
50 deg |
|
L Maximum rollback at carry height (2018)
|
50 deg |
|
L Maximum rollback at carry height (2019)
|
50 deg |
|
L Reach at maximum height (retracted) (Since 2016)
|
93 in (2,361 mm)
|
|
L Reach at maximum height (retracted) (2017)
|
93 in (2,361 mm)
|
|
L Reach at maximum height (retracted) (2018)
|
93 in (2,361 mm)
|
|
L Reach at maximum height (retracted) (2019)
|
93 in (2,361 mm)
|
|
Loader clearance radius with bucket in carry position (Since 2016)
|
260 in (6,616 mm)
|
|
Loader clearance radius with bucket in carry position (2017)
|
260 in (6,616 mm)
|
|
Loader clearance radius with bucket in carry position (2018)
|
260 in (6,616 mm)
|
|
Loader clearance radius with bucket in carry position (2019)
|
260 in (6,616 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
241 in (6,117 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
241 in (6,117 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
241 in (6,117 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
242 in (6,136 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
242 in (6,136 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
242 in (6,136 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
242 in (6,150 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
242 in (6,150 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
242 in (6,150 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2018)
|
243 in (6,164 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
243 in (6,164 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2018)
|
243 in (6,183 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
243 in (6,183 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2018)
|
244 in (6,198 mm)
|
|
Loader clearance radius with bucket in carry position [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
244 in (6,198 mm)
|
|
M Dump clearance at full lift and - 45° discharge angle (Since 2016)
|
134 in (3,415 mm)
|
|
M Dump clearance at full lift and - 45° discharge angle (2017)
|
134 in (3,415 mm)
|
|
M Dump clearance at full lift and - 45° discharge angle (2019)
|
134 in (3,415 mm)
|
|
M Dump clearance at full lift and - 45° discharge angle** (Since 2018)
|
134 in (3,415 mm)
|
|
M Reach at maximum height (mid-position) (Since 2016)
|
116 in (2,943 mm)
|
|
M Reach at maximum height (mid-position) (2017)
|
116 in (2,943 mm)
|
|
M Reach at maximum height (mid-position) (2018)
|
116 in (2,943 mm)
|
|
M Reach at maximum height (mid-position) (2019)
|
116 in (2,943 mm)
|
|
Max Dump Height (Since 2016)
|
4 ft (1 m)
|
|
Max Dump Height (2017)
|
4 ft (1 m)
|
|
Max Dump Height (Since 2019)
|
9 ft (3 m)
|
|
Max Dump Height (2020)
|
9 ft (3 m)
|
|
Max. Dump Height (Since 2023)
|
9 ft (3 m)
|
|
N Hinge pin height at carry position (Since 2016)
|
27 in (686 mm)
|
|
N Hinge pin height at carry position (2017)
|
27 in (686 mm)
|
|
N Hinge pin height at carry position (2018)
|
27 in (686 mm)
|
|
N Hinge pin height at carry position (Since 2019)
|
27 in (686 sq mm)
|
|
N Reach at maximum height (extended) (Since 2016)
|
139 in (3,525 mm)
|
|
N Reach at maximum height (extended) (2017)
|
139 in (3,525 mm)
|
|
N Reach at maximum height (extended) (2018)
|
139 in (3,525 mm)
|
|
N Reach at maximum height (extended) (2019)
|
139 in (3,525 mm)
|
|
Net Power (Since 2021)
|
190 hp (142 kw)
|
|
Net Power (Since 2023)
|
188 hp (140 kw)
|
|
Net Power (2024)
|
188 hp (140 kw)
|
|
Net Power (2025)
|
188 hp (140 kw)
|
|
No. Cylinders (Since 2016)
|
6 |
|
No. Cylinders (2017)
|
6 |
|
No. Cylinders (2018)
|
6 |
|
No. Cylinders (2019)
|
6 |
|
Notes (Since 2023)
|
Based on standard lift, general purpose bucket and coupler. |
|
O Reach at full lift and 45° dump (Since 2016)
|
55 in (1,413 mm)
|
|
O Reach at full lift and 45° dump (2017)
|
55 in (1,413 mm)
|
|
O Reach at full lift and 45° dump (2019)
|
55 in (1,413 mm)
|
|
O Reach at full lift and 45° dump** (Since 2018)
|
55 in (1,413 mm)
|
|
Operating load (extended) @ full articulation (Since 2016)
|
4,294 lbs (1,948 kg)
|
|
Operating load (extended) @ full articulation (2017)
|
4,294 lbs (1,948 kg)
|
|
Operating load (extended) @ full articulation (2018)
|
4,294 lbs (1,948 kg)
|
|
Operating load (extended) @ full articulation (2019)
|
4,294 lbs (1,948 kg)
|
|
Operating load (mid-position) @ full articulation (Since 2016)
|
4,940 lbs (2,241 kg)
|
|
Operating load (mid-position) @ full articulation (2017)
|
4,940 lbs (2,241 kg)
|
|
Operating load (mid-position) @ full articulation (2018)
|
4,940 lbs (2,241 kg)
|
|
Operating load (mid-position) @ full articulation (2019)
|
4,940 lbs (2,241 kg)
|
|
Operating load (retracted) @ full articulation (Since 2016)
|
5,814 lbs (2,637 kg)
|
|
Operating load (retracted) @ full articulation (2017)
|
5,814 lbs (2,637 kg)
|
|
Operating load (retracted) @ full articulation (2018)
|
5,814 lbs (2,637 kg)
|
|
Operating load (retracted) @ full articulation (2019)
|
5,814 lbs (2,637 kg)
|
|
Operating Weight (Since 2016)
|
36,216 lbs (16,427 kg)
|
|
Operating Weight (2017)
|
36,216 lbs (16,427 kg)
|
|
Operating weight (Since 2018)
|
35,735 lbs (16,209 kg)
|
|
Operating Weight (Since 2019)
|
36,216 lbs (16,427 kg)
|
|
Operating Weight (2020)
|
36,216 lbs (16,427 kg)
|
|
Operating Weight (2021)
|
36,216 lbs (16,427 kg)
|
|
Operating Weight (2022)
|
36,216 lbs (16,427 kg)
|
|
Operating Weight (2023)
|
36,216 lbs (16,427 kg)
|
|
Operating Weight (Since 2024)
|
41,794 lb |
|
Operating Weight (2025)
|
41,794 lb |
|
Operating Weight up to (Since 2016)
|
44,533 lbs (20,200 kg)
|
|
Operating Weight up to (2017)
|
44,533 lbs (20,200 kg)
|
|
Operating Weight up to (2018)
|
44,533 lbs (20,200 kg)
|
|
Operating Weight up to (2019)
|
44,533 lbs (20,200 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
35,276 lbs (16,001 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
35,276 lbs (16,001 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
35,276 lbs (16,001 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
35,375 lbs (16,046 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
35,375 lbs (16,046 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
35,375 lbs (16,046 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
35,455 lbs (16,082 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
35,455 lbs (16,082 kg)
|
|
Operating weight [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
35,455 lbs (16,082 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2016)
|
35,521 lbs (16,112 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2018)
|
35,521 lbs (16,112 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
35,521 lbs (16,112 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2016)
|
35,620 lbs (16,157 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2018)
|
35,620 lbs (16,157 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
35,620 lbs (16,157 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2016)
|
35,699 lbs (16,193 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2018)
|
35,699 lbs (16,193 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
35,699 lbs (16,193 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (Since 2016)
|
35,340 lbs (16,030 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2018)
|
35,340 lbs (16,030 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2019)
|
35,340 lbs (16,030 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (Since 2016)
|
35,437 lbs (16,074 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2018)
|
35,437 lbs (16,074 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2019)
|
35,437 lbs (16,074 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (Since 2016)
|
35,519 lbs (16,111 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2018)
|
35,519 lbs (16,111 kg)
|
|
Operating weight [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2019)
|
35,519 lbs (16,111 kg)
|
|
Overall height with bucket at full raise (Since 2016)
|
238 in (6,043 mm)
|
|
Overall height with bucket at full raise (2017)
|
238 in (6,043 mm)
|
|
Overall height with bucket at full raise (2018)
|
238 in (6,043 mm)
|
|
Overall height with bucket at full raise (2019)
|
238 in (6,043 mm)
|
|
Overall height with bucket at full raise [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2018)
|
206 in (5,242 mm)
|
|
Overall height with bucket at full raise [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
206 in (5,242 mm)
|
|
Overall height with bucket at full raise [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2018)
|
209 in (5,301 mm)
|
|
Overall height with bucket at full raise [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
209 in (5,301 mm)
|
|
Overall height with bucket at full raise [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2018)
|
211 in (5,348 mm)
|
|
Overall height with bucket at full raise [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
211 in (5,348 mm)
|
|
Overall length (Since 2016)
|
370 in (9,408 mm)
|
|
Overall length (2017)
|
370 in (9,408 mm)
|
|
Overall length (2018)
|
370 in (9,408 mm)
|
|
Overall length (2019)
|
370 in (9,408 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
299 in (7,604 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
299 in (7,604 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
299 in (7,604 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
302 in (7,666 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
302 in (7,666 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
302 in (7,666 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
304 in (7,715 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
304 in (7,715 mm)
|
|
Overall length [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
304 in (7,715 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2016)
|
305 in (7,750 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2018)
|
305 in (7,750 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
305 in (7,750 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2016)
|
308 in (7,812 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2018)
|
308 in (7,812 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
308 in (7,812 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2016)
|
309 in (7,861 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2018)
|
309 in (7,861 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
309 in (7,861 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (Since 2016)
|
304 in (7,729 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2018)
|
304 in (7,729 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2019)
|
304 in (7,729 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (Since 2016)
|
307 in (7,791 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2018)
|
307 in (7,791 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2019)
|
307 in (7,791 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (Since 2016)
|
309 in (7,840 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2018)
|
309 in (7,840 mm)
|
|
Overall length [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2019)
|
309 in (7,840 mm)
|
|
P Clearance at maximum height (retracted) (Since 2016)
|
223 in (5,655 mm)
|
|
P Clearance at maximum height (retracted) (2017)
|
223 in (5,655 mm)
|
|
P Clearance at maximum height (retracted) (2018)
|
223 in (5,655 mm)
|
|
P Clearance at maximum height (retracted) (2019)
|
223 in (5,655 mm)
|
|
P Clearance level bucket at full height (Since 2016)
|
166 in (4,223 mm)
|
|
P Clearance level bucket at full height (2017)
|
166 in (4,223 mm)
|
|
P Clearance level bucket at full height (2019)
|
166 in (4,223 mm)
|
|
P Clearance level bucket at full height*** (Since 2018)
|
166 in (4,223 mm)
|
|
Q Clearance at maximum height (mid-position) (Since 2016)
|
244 in (6,204 mm)
|
|
Q Clearance at maximum height (mid-position) (2017)
|
244 in (6,204 mm)
|
|
Q Clearance at maximum height (mid-position) (2018)
|
244 in (6,204 mm)
|
|
Q Clearance at maximum height (mid-position) (2019)
|
244 in (6,204 mm)
|
|
Q Maximum hinge pin height (Since 2016)
|
179 in (4,550 mm)
|
|
Q Maximum hinge pin height (2017)
|
179 in (4,550 mm)
|
|
Q Maximum hinge pin height (2019)
|
179 in (4,550 mm)
|
|
Q Maximum hinge pin height*** (Since 2018)
|
179 in (4,550 mm)
|
|
R Clearance at maximum height (extended) (Since 2016)
|
266 in (6,754 mm)
|
|
R Clearance at maximum height (extended) (2017)
|
266 in (6,754 mm)
|
|
R Clearance at maximum height (extended) (2018)
|
266 in (6,754 mm)
|
|
R Clearance at maximum height (extended) (2019)
|
266 in (6,754 mm)
|
|
R Maximum overall height (Since 2016)
|
230 in (5,853 mm)
|
|
R Maximum overall height (2017)
|
230 in (5,853 mm)
|
|
R Maximum overall height (2019)
|
230 in (5,853 mm)
|
|
R Maximum overall height*** (Since 2018)
|
230 in (5,853 mm)
|
|
Rated bucket capacity (Since 2016)
|
3 cu yd (2 cu m)
|
|
Rated bucket capacity (2017)
|
3 cu yd (2 cu m)
|
|
Rated bucket capacity (2018)
|
3 cu yd (2 cu m)
|
|
Rated bucket capacity (2019)
|
3 cu yd (2 cu m)
|
|
Rated Bucket Capacity (Since 2023)
|
4 yd³ |
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2018)
|
3 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
3 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2018)
|
4 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
4 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2018)
|
4 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
4 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (Since 2016)
|
3 cu yd (2 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2018)
|
3 cu yd (2 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2019)
|
3 cu yd (2 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (Since 2016)
|
3 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2018)
|
3 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2019)
|
3 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (Since 2016)
|
4 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2018)
|
4 cu yd (3 cu m)
|
|
Rated bucket capacity [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2019)
|
4 cu yd (3 cu m)
|
|
Rated Engine RPM (Since 2016)
|
1,800 rpm |
|
Rated Engine RPM (2017)
|
1,800 rpm |
|
Rated Engine RPM (2018)
|
1,800 rpm |
|
Rated Engine RPM (2019)
|
1,800 rpm |
|
Rated operating load - Per CEN 474-3 firm level ground (Since 2016)
|
10,128 lbs (4,594 kg)
|
|
Rated operating load - Per CEN 474-3 firm level ground (2017)
|
10,128 lbs (4,594 kg)
|
|
Rated operating load - Per CEN 474-3 firm level ground (2018)
|
10,128 lbs (4,594 kg)
|
|
Rated operating load - Per CEN 474-3 firm level ground (2019)
|
10,128 lbs (4,594 kg)
|
|
Rated operating load - Per CEN 474-3 rough terrain (Since 2016)
|
7,595 lbs (3,445 kg)
|
|
Rated operating load - Per CEN 474-3 rough terrain (2017)
|
7,595 lbs (3,445 kg)
|
|
Rated operating load - Per CEN 474-3 rough terrain (2018)
|
7,595 lbs (3,445 kg)
|
|
Rated operating load - Per CEN 474-3 rough terrain (2019)
|
7,595 lbs (3,445 kg)
|
|
Rated operating load - Per SAE J1197 (Since 2016)
|
6,329 lbs (2,871 kg)
|
|
Rated operating load - Per SAE J1197 (2017)
|
6,329 lbs (2,871 kg)
|
|
Rated operating load - Per SAE J1197 (2018)
|
6,329 lbs (2,871 kg)
|
|
Rated operating load - Per SAE J1197 (2019)
|
6,329 lbs (2,871 kg)
|
|
Rated Power (Since 2016)
|
190 hp (140 kW)
|
|
Rated Power (2019)
|
190 hp (140 kW)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance (Since 2016)
|
97 in (2,469 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance (2017)
|
97 in (2,469 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance (2018)
|
97 in (2,469 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance (2019)
|
97 in (2,469 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
64 in (1,637 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
64 in (1,637 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
64 in (1,637 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
65 in (1,652 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
65 in (1,652 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
65 in (1,652 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
66 in (1,664 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
66 in (1,664 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
66 in (1,664 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2018)
|
66 in (1,684 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
66 in (1,684 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2018)
|
67 in (1,696 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
67 in (1,696 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2018)
|
67 in (1,705 mm)
|
|
Reach at 45° discharge and 2130 mm (7'0") clearance [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
67 in (1,705 mm)
|
|
Reach at full lift and 45° discharge (Since 2016)
|
66 in (1,678 mm)
|
|
Reach at full lift and 45° discharge (2017)
|
66 in (1,678 mm)
|
|
Reach at full lift and 45° discharge (2018)
|
66 in (1,678 mm)
|
|
Reach at full lift and 45° discharge (2019)
|
66 in (1,678 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
44 in (1,108 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
44 in (1,108 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
44 in (1,108 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
45 in (1,146 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
45 in (1,146 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
45 in (1,146 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
46 in (1,178 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
46 in (1,178 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
46 in (1,178 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2018)
|
48 in (1,210 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
48 in (1,210 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2018)
|
49 in (1,247 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
49 in (1,247 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2018)
|
50 in (1,278 mm)
|
|
Reach at full lift and 45° discharge [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
50 in (1,278 mm)
|
|
Reach full down (mid-position) (Since 2016)
|
52 in (1,324 mm)
|
|
Reach full down (mid-position) (2017)
|
52 in (1,324 mm)
|
|
Reach full down (mid-position) (2018)
|
52 in (1,324 mm)
|
|
Reach full down (mid-position) (2019)
|
52 in (1,324 mm)
|
|
Reach with fork at maximum height (Since 2016)
|
43 in (1,081 mm)
|
|
Reach with fork at maximum height (2017)
|
43 in (1,081 mm)
|
|
Reach with fork at maximum height (2018)
|
43 in (1,081 mm)
|
|
Reach with fork at maximum height (2019)
|
43 in (1,081 mm)
|
|
Reach with lift arms horizontal and bucket level (Since 2016)
|
137 in (3,489 mm)
|
|
Reach with lift arms horizontal and bucket level (2017)
|
137 in (3,489 mm)
|
|
Reach with lift arms horizontal and bucket level (2018)
|
137 in (3,489 mm)
|
|
Reach with lift arms horizontal and bucket level (2019)
|
137 in (3,489 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
97 in (2,452 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
97 in (2,452 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
97 in (2,452 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
99 in (2,514 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
99 in (2,514 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
99 in (2,514 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
101 in (2,563 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
101 in (2,563 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
101 in (2,563 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2018)
|
102 in (2,598 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
102 in (2,598 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2018)
|
105 in (2,660 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
105 in (2,660 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2018)
|
107 in (2,709 mm)
|
|
Reach with lift arms horizontal and bucket level [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
107 in (2,709 mm)
|
|
Reach with lift arms horizontal and forks level (Since 2016)
|
90 in (2,282 mm)
|
|
Reach with lift arms horizontal and forks level (2017)
|
90 in (2,282 mm)
|
|
Reach with lift arms horizontal and forks level (2018)
|
90 in (2,282 mm)
|
|
Reach with lift arms horizontal and forks level (2019)
|
90 in (2,282 mm)
|
|
S Full dump at maximum lift (Since 2016)
|
47 deg |
|
S Full dump at maximum lift (2017)
|
47 deg |
|
S Full dump at maximum lift (2018)
|
47 deg |
|
S Full dump at maximum lift (2019)
|
47 deg |
|
Static tipping load straight (Since 2016)
|
17,306 lbs (7,850 kg)
|
|
Static tipping load straight (2017)
|
17,306 lbs (7,850 kg)
|
|
Static tipping load straight (2018)
|
17,306 lbs (7,850 kg)
|
|
Static tipping load straight (2019)
|
17,306 lbs (7,850 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
27,214 lbs (12,344 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
27,214 lbs (12,344 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
27,214 lbs (12,344 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
26,996 lbs (12,245 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
26,996 lbs (12,245 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
26,996 lbs (12,245 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
26,810 lbs (12,161 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
26,810 lbs (12,161 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
26,810 lbs (12,161 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2016)
|
26,910 lbs (12,206 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2018)
|
26,910 lbs (12,206 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
26,910 lbs (12,206 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2016)
|
26,687 lbs (12,105 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2018)
|
26,687 lbs (12,105 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
26,687 lbs (12,105 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2016)
|
26,500 lbs (12,020 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2018)
|
26,500 lbs (12,020 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
26,500 lbs (12,020 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (Since 2016)
|
27,137 lbs (12,309 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2018)
|
27,137 lbs (12,309 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2019)
|
27,137 lbs (12,309 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (Since 2016)
|
26,916 lbs (12,209 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2018)
|
26,916 lbs (12,209 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2019)
|
26,916 lbs (12,209 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (Since 2016)
|
26,731 lbs (12,125 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2018)
|
26,731 lbs (12,125 kg)
|
|
Static tipping load straight [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2019)
|
26,731 lbs (12,125 kg)
|
|
Static tipping load with 40° turn (Since 2016)
|
14,517 lbs (6,585 kg)
|
|
Static tipping load with 40° turn (2017)
|
14,517 lbs (6,585 kg)
|
|
Static tipping load with 40° turn (2018)
|
14,517 lbs (6,585 kg)
|
|
Static tipping load with 40° turn (2019)
|
14,517 lbs (6,585 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (Since 2016)
|
23,186 lbs (10,517 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2018)
|
23,186 lbs (10,517 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.5 m3 rated] (2019)
|
23,186 lbs (10,517 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (Since 2016)
|
22,985 lbs (10,426 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2018)
|
22,985 lbs (10,426 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.7 m3 rated] (2019)
|
22,985 lbs (10,426 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (Since 2016)
|
22,818 lbs (10,350 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2018)
|
22,818 lbs (10,350 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; cutting edge; 2.9 m3 rated] (2019)
|
22,818 lbs (10,350 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2016)
|
22,888 lbs (10,382 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2018)
|
22,888 lbs (10,382 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
22,888 lbs (10,382 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2016)
|
22,683 lbs (10,289 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2018)
|
22,683 lbs (10,289 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
22,683 lbs (10,289 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2016)
|
22,514 lbs (10,212 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2018)
|
22,514 lbs (10,212 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
22,514 lbs (10,212 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (Since 2016)
|
23,109 lbs (10,482 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2018)
|
23,109 lbs (10,482 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2019)
|
23,109 lbs (10,482 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (Since 2016)
|
22,908 lbs (10,391 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2018)
|
22,908 lbs (10,391 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2019)
|
22,908 lbs (10,391 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (Since 2016)
|
22,738 lbs (10,314 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2018)
|
22,738 lbs (10,314 kg)
|
|
Static tipping load with 40° turn [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2019)
|
22,738 lbs (10,314 kg)
|
|
Static tipping load with level arms and forks, full 40° turn (Since 2016)
|
11,125 lbs (5,046 kg)
|
|
Static tipping load with level arms and forks, full 40° turn (2017)
|
11,125 lbs (5,046 kg)
|
|
Static tipping load with level arms and forks, full 40° turn (2018)
|
11,125 lbs (5,046 kg)
|
|
Static tipping load with level arms and forks, full 40° turn (2019)
|
11,125 lbs (5,046 kg)
|
|
Static tipping load with level arms and forks, straight (Since 2016)
|
13,237 lbs (6,004 kg)
|
|
Static tipping load with level arms and forks, straight (2017)
|
13,237 lbs (6,004 kg)
|
|
Static tipping load with level arms and forks, straight (2018)
|
13,237 lbs (6,004 kg)
|
|
Static tipping load with level arms and forks, straight (2019)
|
13,237 lbs (6,004 kg)
|
|
Stroke (Since 2016)
|
5 in (135 mm)
|
|
Stroke (2017)
|
5 in (135 mm)
|
|
Stroke (2018)
|
5 in (135 mm)
|
|
Stroke (2019)
|
5 in (135 mm)
|
|
Struck capacity (Since 2016)
|
3 cu yd (2 cu m)
|
|
Struck capacity (2017)
|
3 cu yd (2 cu m)
|
|
Struck capacity (2018)
|
3 cu yd (2 cu m)
|
|
Struck capacity (2019)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (Since 2018)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth and segments; 2.5 m3 rated] (2019)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (Since 2018)
|
3 cu yd (3 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth and segments; 2.7 m3 rated] (2019)
|
3 cu yd (3 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (Since 2018)
|
4 cu yd (3 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth and segments; 2.9 m3 rated] (2019)
|
4 cu yd (3 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (Since 2016)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2018)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.4 m3 rated] (2019)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (Since 2016)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2018)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.6 m3 rated] (2019)
|
3 cu yd (2 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (Since 2016)
|
3 cu yd (3 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2018)
|
3 cu yd (3 cu m)
|
|
Struck capacity [Std lift pin-on GP bucket; teeth; 2.8 m3 rated] (2019)
|
3 cu yd (3 cu m)
|
|
T Maximum roll back at maximum lift (Since 2016)
|
53 deg |
|
T Maximum roll back at maximum lift (2017)
|
53 deg |
|
T Maximum roll back at maximum lift (2018)
|
53 deg |
|
T Maximum roll back at maximum lift (2019)
|
53 deg |
|
Tip Load (Since 2021)
|
26,097 lbs (11,837 kg)
|
|
Tip Load (2022)
|
26,097 lbs (11,837 kg)
|
|
Tip Load (2023)
|
26,097 lbs (11,837 kg)
|
|
Tires (Since 2016)
|
20.5 R25 (L-3) XHA2 |
|
Tires (2017)
|
20.5 R25 (L-3) XHA2 |
|
Tires (2018)
|
20.5 R25 (L-3) XHA2 |
|
Tires (2019)
|
20.5 R25 (L-3) XHA2 |
|
Travel Speed(Fwd/Rev) (Since 2021)
|
25 / 25 mph |
|
Travel Speed(Fwd/Rev) (2022)
|
25 / 25 mph |
|
Travel Speed(Fwd/Rev) (2023)
|
25 / 25 mph |
|
Tread Width (Since 2016)
|
82 in (2 m)
|
|
Tread Width (2017)
|
82 in (2 m)
|
|
Tread Width (2018)
|
82 in (2 m)
|
|
Tread Width (2019)
|
82 in (2 m)
|
|
Tread Width** (Since 2018)
|
82 in (2 m)
|
|
Width Over Tires (Since 2016)
|
106 in (3 m)
|
|
Width Over Tires (2017)
|
106 in (3 m)
|
|
Width Over Tires (2018)
|
106 in (3 m)
|
|
Width Over Tires (2019)
|
106 in (3 m)
|
|
Width Over Tires** (Since 2018)
|
106 in (3 m)
|
| Loader Hydraulic System |
|
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Dump (At Maximum Lift Height) |
1.5/1.7 seconds |
|
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Float Down (Maximum Lift To Ground Level) |
2.7/2.7 seconds |
|
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Raise (Ground Level To Maximum Lift) |
5.5/6.2 seconds |
|
Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Total Cycle Time |
9.7/10.6 seconds |
|
Lift Cylinder, Double Acting - Bore Diameter |
5 in (12 cm)
|
|
Lift Cylinder, Double Acting - Rod Diameter |
3 in (7 cm)
|
|
Lift Cylinder, Double Acting - Stroke |
31 in (79 cm)
|
|
Maximum Flow - Implement Pump |
50 gpm (189 lpm)
|
|
Maximum Flow - Implement Pump - 3rd Function* |
50 gpm (189 lpm)
|
|
Maximum Flow - Implement Pump - 4th Function Maximum Flow* |
42 gpm (159 lpm)
|
|
Maximum Working Pressure - Implement Pump |
4,061 psi |
|
Note (1) |
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
|
Note (2) |
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
|
Note (3) |
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
|
Relief Pressure - Tilt Cylinder |
4,351 psi |
|
Relief Pressure - Tilt Cylinder - 3rd And 4th Function Maximum Working Pressure |
4,061 psi |
|
Relief Pressure - Tilt Cylinder - 3rd And 4th Function Relief Pressure |
4,351 psi |
|
Tilt Cylinder, Double Acting - Bore Diameter |
6 in (15 cm)
|
|
Tilt Cylinder, Double Acting - Rod Diameter |
4 in (9 cm)
|
|
Tilt Cylinder, Double Acting - Stroke |
22 in (56 cm)
|
| Operating Specifications |
|
Full Turn Tip Load |
22,107 lbs (10,028 kg)
|
| Operational |
|
Operating Weight |
36,216 lbs (16,427 kg)
|
| Power Train |
|
Brakes - Parking |
Spring applied hydraulically released |
|
Brakes - Service |
Outboard wet disc |
|
Front Axle |
Fixed |
|
Front Axle - Traction Aid - Standard |
Locking differential |
|
Note (1) |
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
|
Note (2) |
Differential front locking axle can be engaged on the go at full torque up to 20 km/h (12.4 mph) on the 938M. |
|
Note (3) |
Offset rims available to meet European roading requirements. |
|
Rear Axle |
Oscillating |
|
Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65 |
11 degrees |
|
Rear Axle - Oscillation Angle By Tire Size - 23.5 R25 |
7 degrees |
|
Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder |
7 degrees |
|
Rear Axle - Traction Aid - Optional |
Limited slip differential |
| Service Refill Capacities |
|
Cooling System |
9 gal (32 l)
|
|
Diesel Exhaust Fluid (Def) Tank |
5 gal (19 l)
|
|
Engine Crankcase |
5 gal (20 l)
|
|
Front Axles |
9 gal (35 l)
|
|
Fuel Tank |
52 gal (195 l)
|
|
Hydraulic System - Including Tank |
45 gal (170 l)
|
|
Hydraulic Tank |
24 gal (90 l)
|
|
Rear Axles |
9 gal (35 l)
|
|
Transmission - Gear Box |
3 gal (11 l)
|
| Steering |
|
Maximum Flow - Steering Pump |
34 gpm (129 lpm)
|
|
Maximum Steering Torque - 0 Degrees (Straight Machine) |
42,506 lbs ft (57,630 nm)
|
|
Maximum Steering Torque - 40 Degrees (Full Turn) |
31,398 lbs ft (42,569 nm)
|
|
Maximum Working Pressure - Steering Pump |
3,500 psi |
|
Note (1) |
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
|
Note (2) |
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
|
Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed |
2.3 s |
|
Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited |
3.1 s |
|
Steering Cylinder, Double Acting - Bore Diameter |
3 in (8 cm)
|
|
Steering Cylinder, Double Acting - Rod Diameter |
2 in (5 cm)
|
|
Steering Cylinder, Double Acting - Stroke |
16 in (40 cm)
|
| Transmission |
|
Forward And Reverse - Range 1* |
1-13 km/h (0.6-8 mph) |
|
Forward And Reverse - Range 2 |
8 mph (13 kph)
|
|
Forward And Reverse - Range 3 |
17 mph (27 kph)
|
|
Forward And Reverse - Range 4 |
25 mph (40 kph)
|
|
Note |
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
