Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $155,500.00 USD
Apply for Financing| Hours: | 6868 |
| Serial Number: | EMB00737 |
| Machine Location: | ENROUTE, MI |
| More Information: | https://catused.com/cu/10294263 |
Supplied by HeavyEquipmentData.com →
| Axles | |
| Front | Fixed |
| Maximum Single-Wheel Rise And Fall | 19 in (49 cm) |
| Rear | Oscillating ?13 degrees |
| Brakes | |
| Brakes | Brakes meet ISO 3450 standards |
| Bucket Capacities | |
| Bucket Range | 2.5-9.2 m (3.3-12.0 yd) |
| Buckets | |
| Bucket Capacities | 2.5-9.2 m (3.3-12.0 yd) |
| Cab | |
| Rops/Fops | ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards |
| Dimensions | |
| Centerline Of Rear Axle To Edge Of Counterweight | 76 in (193 cm) |
| Centerline Of Rear Axle To Hitch | 66 in (168 cm) |
| Ground Clearance | 1 ft (0 m) |
| Height | 11 ft (3 m) |
| Height - Top Of Exhaust Pipe | 90 in (229 cm) |
| Height - Top Of Hood | 106 in (269 cm) |
| Height - Top Of Rops | 8 ft (2 m) |
| Hinge Pin Height At Carry Height | 25 in (64 cm) |
| Hinge Pin Height At Maximum Lift | 159 in (404 cm) |
| Length | 27 ft (8 m) |
| Maximum Width Over Tires (Loaded) | 111 in (282 cm) |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length (Without Bucket) | 272 in (691 cm) |
| Tread Width | 84 in (213 cm) |
| Weight | 42,357 lbs (19,213 kg) |
| Wheel Base | 11 ft (3 m) |
| Width | 9 ft (3 m) |
| Dimensions - High Lift | |
| Centerline Of Rear Axle To Edge Of Counterweight | 6 ft (2 m) |
| Centerline Of Rear Axle To Hitch | 6 ft (2 m) |
| Ground Clearance | 1 ft (0 m) |
| Height - Top Of Exhaust Pipe | 11 ft (3 m) |
| Height - Top Of Hood | 9 ft (3 m) |
| Height - Top Of Rops | 11 ft (3 m) |
| Hinge Pin Height At Carry Height | 3 ft (1 m) |
| Hinge Pin Height At Maximum Lift | 15 ft (5 m) |
| Lift Arm Clearance At Maximum Lift | 12 ft (4 m) |
| Maximum Width - Over Tires - Loaded | 9 ft (3 m) |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length - Without Bucket | 25 ft (7 m) |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back At Ground | 40 degrees |
| Tread Width | 7 ft (2 m) |
| Wheel Base | 11 ft (3 m) |
| Dimensions - Standard Lift | |
| Centerline Of Rear Axle To Edge Of Counterweight | 6 ft (2 m) |
| Centerline Of Rear Axle To Hitch | 6 ft (2 m) |
| Ground Clearance | 1 ft (0 m) |
| Height - Top Of Exhaust Pipe | 11 ft (3 m) |
| Height - Top Of Hood | 9 ft (3 m) |
| Height - Top Of Rops | 11 ft (3 m) |
| Hinge Pin Height At Carry Height | 2 ft (1 m) |
| Hinge Pin Height At Maximum Lift | 13 ft (4 m) |
| Lift Arm Clearance At Maximum Lift | 11 ft (3 m) |
| Maximum Width - Over Tires - Loaded | 9 ft (3 m) |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Overall Length - Without Bucket | 23 ft (7 m) |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back At Ground | 36 degrees |
| Tread Width | 7 ft (2 m) |
| Wheel Base | 11 ft (3 m) |
| Engine | |
| Bore | 4 in (11 cm) |
| Displacement | 428 cu in (7,014 cu cm) |
| Engine Model | Cat C7.1 ACERT |
| Maximum Gross Power - 2,100 Rpm - Sae J1995 | 250 hp (186 kw) |
| Maximum Gross Power - Sae J1995 | 250 hp (186 kw) |
| Maximum Net Power - 2,000 Rpm - Iso 9249 | 248 hp (185 kw) |
| Maximum Net Power - 2,000 Rpm - Iso 9249 - Metric | 252 hp (188 kw) |
| Maximum Net Power - 2,000 Rpm - Sae J1349 | 248 hp (185 kw) |
| Maximum Net Power - 2,100 Rpm - Iso 9249 | 230 hp (172 kw) |
| Maximum Net Power - 2,100 Rpm - Iso 9249 - Metric | 232 hp (173 kw) |
| Maximum Net Power - 2,100 Rpm - Sae J1349 | 230 hp (172 kw) |
| Maximum Net Power - Sae J1349 | 230 hp (172 kw) |
| Maximum Net Torque - 1,300 Rpm | 858 lbs ft (1,163 nm) |
| Maximum Net Torque - 1,300 Rpm - Sae J1349 | 858 lbs ft (1,163 nm) |
| Maximum Net Torque - 1,400 Rpm | 726 lbs ft (984 nm) |
| Maximum Power - 2,000 Rpm - Iso 14396 | 261 hp (195 kw) |
| Maximum Power - 2,000 Rpm - Iso 14396 - Metric | 265 hp (198 kw) |
| Maximum Power - 2,000 Rpm - Sae J1995 | 263 hp (196 kw) |
| Maximum Power - 2,100 Rpm - Iso 14396 | 249 hp (186 kw) |
| Maximum Power - 2,100 Rpm - Iso 14396 - Metric | 253 hp (189 kw) |
| Maximum Power - 2,100 Rpm - Sae J1995 | 250 hp (186 kw) |
| Net Power - Iso 9249 | 230 hp (172 kw) |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
| Peak Gross Torque - 1,300 Rpm - Iso 14396 | 908 lbs ft (1,231 nm) |
| Peak Gross Torque - 1,300 Rpm - Sae J1995 | 911 lbs ft (1,235 nm) |
| Peak Gross Torque - 1,400 Rpm - Iso 14396 | 774 lbs ft (1,049 nm) |
| Peak Gross Torque - 1,400 Rpm - Sae J1995 | 777 lbs ft (1,053 nm) |
| Stroke | 5 in (14 cm) |
| Engine - Tier 4 Final/Stage Iv | |
| Emissions | Tier 4/Stage IV |
| General Specifications | |
| Bucket Capacity (Since 2016) | 3.3 - 12.0 |
| Bucket Capacity (Since 2017) | 3.3 - 12.0 (2.5 - 9.2) |
| Engine Power (Since 2016) | 230 hp (172 kw) |
| Engine Power (Since 2017) | 230 (172) |
| Engine type (Since 2016) | Cat C7.1 ACERT |
| Engine type (Since 2020) | Cat C7.1 |
| Max Dump Height (Since 2016) | 5 ft (1 m) |
| Max Dump Height (Since 2017) | 4.7 (1.4) |
| Max Dump Height (Since 2019) | 9.4 (2.9) |
| Operating Weight (Since 2016) | 42,357 lbs (19,210 kg) |
| Operating Weight (Since 2017) | 42,357 (19,213) |
| Tip Load (Since 2021) | 28,144 (12,766) |
| Travel Speed(Fwd/Rev) (Since 2021) | 24.9 / 16.0 mph |
| Hydraulic System | |
| Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise | 1.5 s |
| Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down | 2.3 s |
| Hydraulic Cycle Time - Rated Payload - Raise From Carry Position | 5.1 s |
| Hydraulic Cycle Time - Rated Payload - Total | 8.9 s |
| Hydraulic Cycle Time - Total | 8.9 s |
| Implement Pump Type | Variable Axial Piston |
| Implement System - Maximum Operating Pressure | 4,250 psi |
| Implement System - Maximum Pump Output At 2,150 Rpm | 76 gpm (288 lpm) |
| Implement System - Optional 3rd Function Maximum Flow | 63 gpm (238 lpm) |
| Implement System - Optional 3rd Function Maximum Pressure | 3,220 psi |
| Operating Specifications | |
| Breakout Force | 40,690 lbs (18,454 kg) |
| Note (1) | For a machine configuration as defined under ?Weight.? |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection | 25,926 lbs (11,758 kg) |
| Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection | 24,262 lbs (11,003 kg) |
| Operational | |
| Operating Weight | 42,360 lbs (19,211 kg) |
| Service Refill Capacities | |
| Cooling System | 16 gal (59 l) |
| Crankcase | 6 gal (22 l) |
| Def Tank | 4 gal (16 l) |
| Def Tank* | 4 gal (16 l) |
| Differential - Final Drives - Front | 11 gal (43 l) |
| Differential - Final Drives - Rear | 11 gal (43 l) |
| Fuel Tank | 73 gal (275 l) |
| Hydraulic Tank | 33 gal (125 l) |
| Note | *Must meet the requirements outlined in ISO 22241-1. |
| Transmission | 11 gal (43 l) |
| Sound | |
| Exterior Sound Power Level - Iso 6395:2008 | 108 dB(A) |
| Exterior Sound Pressure Level - Sae J88:2013 | 75 dB(A) |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (2) | **For machines in European Union countries and in countries that adopt the ?EU Directives.? |
| Note (3) | ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
| Operator Sound Pressure Level - Iso 6396:2008 | 70 dB(A) |
| With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)** | 104 LWA*** |
| With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)** | 69 dB(A) |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008) | 107 dB(A) |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013) | 75 dB(A)* |
| With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008) | 70 dB(A) |
| Transmission | |
| Forward - 1 | 4 mph (7 kph) |
| Forward - 2 | 8 mph (12 kph) |
| Forward - 3 | 12 mph (19 kph) |
| Forward - 4 | 16 mph (26 kph) |
| Forward - 5 | 25 mph (39 kph) |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Reverse - 1 | 4 mph (7 kph) |
| Reverse - 2 | 8 mph (12 kph) |
| Reverse - 3 | 16 mph (26 kph) |
| Weights | |
| Note | Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 (4.1 yd3) general purpose bucket with BOCE. |
| Operating Weight | 42,357 lbs (19,210 kg) |