2016 Caterpillar 966M For Sale in Grand Prairie, TX

Name: 2016 Caterpillar 966M
Brand: Caterpillar
SKU: 89123115
Availability: InStock

/ Save to Watch List

For Sale: Call for Price

T-K-O Equipment Co.

T-K-O Equipment Co. Dealer Info

T-K-O Equipment Co. Website

Click here to email T-K-O Equipment Co..

Click for Phone Number

Machine Info:

Serial Number:	KJP1822
Machine Location:	GRAND PRAIRIE, TX

Description:

GP Bucket, Plumbed For QC, Ride Control, 3rd Valve For Auxiliary Hydraulics, Final Tier IV Engine, EROPS, A/C, Heater, 29.5Rx25 Tires

From the manufacturer:

Supplied by HeavyEquipmentData.com →

The Caterpillar 966M is a wheel loader designed for material handling, stockpiling, truck loading, and general earthmoving applications. It is part of Caterpillar's M Series and is commonly used in construction, quarry, aggregate, and industrial sites. The 966M features a Cat diesel engine, hydrostatic or power shift drivetrain depending on configuration, and a loader linkage optimized for breakout force and lift performance. Operator controls, visibility, and service access are designed for productivity and maintenance efficiency. The 966M is available with multiple bucket and tire options to suit different jobsite requirements and material types.

Axles
Front	Fixed
Maximum Single-Wheel Rise And Fall	20 in (50 cm)
Rear	Oscillating ?13 degrees
Brakes
Brakes	Brakes meet ISO 3450 standards
Bucket Capacities
Bucket Range	3.20-7.40 m (4.19-9.68 yd)
Buckets
Bucket Capacities	2.5-9.2 m? (3.25-12.0 yd?)
Cab
Rops/Fops	ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards
Dimensions
Height	12 ft (4 m)
Height	12 ft (4 m)
Length	29 ft (9 m)
Length	29 ft (9 m)
Weight	51,176 lbs (23,209 kg)
Weight	51,176 lbs (23,209 kg)
Width	10 ft (3 m)
Width	10 ft (3 m)
Dimensions - High Lift
Centerline Of Rear Axle To Edge Of Counterweight	8 ft (2 m)
Centerline Of Rear Axle To Hitch	6 ft (2 m)
Ground Clearance	1 ft (0 m)
Height - Top Of Exhaust Pipe	12 ft (4 m)
Height - Top Of Hood	9 ft (3 m)
Height - Top Of Rops	12 ft (4 m)
Hinge Pin Height At Carry	3 ft (1 m)
Hinge Pin Height At Maximum Lift	16 ft (5 m)
Lift Arm Clearance At Maximum Lift	14 ft (4 m)
Maximum Width Over Tires	10 ft (3 m)
Note	All dimensions are approximate and based on L3 XHA2 tires.
Overall Length - Without Bucket	27 ft (8 m)
Rack Back - Carry Height	49 degrees
Rack Back - Maximum Lift	71 degrees
Rack Back At Ground	39 degrees
Tread Width	7 ft (2 m)
Wheel Base	12 ft (4 m)
Dimensions - Standard Lift
Centerline Of Rear Axle To Edge Of Counterweight	7 ft (2 m)
Centerline Of Rear Axle To Hitch	6 ft (2 m)
Ground Clearance	1 ft (0 m)
Height - Top Of Exhaust Pipe	12 ft (4 m)
Height - Top Of Hood	9 ft (3 m)
Height - Top Of Rops	12 ft (4 m)
Hinge Pin Height At Carry	2 ft (1 m)
Hinge Pin Height At Maximum Lift	14 ft (4 m)
Lift Arm Clearance At Maximum Lift	12 ft (4 m)
Maximum Width Over Tires	10 ft (3 m)
Note	All dimensions are approximate and based on L3 XHA2 tires.
Overall Length - Without Bucket	24 ft (7 m)
Rack Back - Carry Height	50 degrees
Rack Back - Maximum Lift	62 degrees
Rack Back At Ground	42 degrees
Tread Width	7 ft (2 m)
Wheel Base	12 ft (4 m)
Engine
Bore	5 in (12 cm)
Displacement	568 cu in (9,308 cu cm)
Engine Model	Cat? C9.3 ACERT?
Maximum Gross Power - 1,800 Rpm - Sae J1995	311 hp (232 kw)
Maximum Gross Power - Sae J1995	311 hp (232 kw)
Maximum Net Power - 1,700 Rpm - Iso 9249	276 hp (206 kw)
Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric	280 hp (209 kw)
Maximum Net Power - 1,700 Rpm - Sae J1349	276 hp (206 kw)
Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric	280 hp (209 kw)
Maximum Net Power - Sae J1349	276 hp (206 kw)
Maximum Net Torque - 1,000 Rpm	1,126 lbs ft (1,527 nm)
Maximum Net Torque - 1,000 Rpm - Sae J1349	1,126 lbs ft (1,527 nm)
Maximum Power - 1,800 Rpm - Iso 14396	307 hp (229 kw)
Maximum Power - 1,800 Rpm - Iso 14396 - Metric	311 hp (232 kw)
Maximum Power - 1,800 Rpm - Sae J1995	311 hp (232 kw)
Maximum Power - 1,800 Rpm - Sae J1995 - Metric	315 hp (235 kw)
Net Power - Iso 9249	276 hp (206 kw)
Note	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Peak Gross Torque - 1,200 Rpm - Iso 14396	1,166 lbs ft (1,581 nm)
Peak Gross Torque - 1,200 Rpm - Sae J1995	1,179 lbs ft (1,598 nm)
Stroke	6 in (15 cm)
Engine - Tier 3/Stage Iiia Equivalent
Emissions	Tier 3/Stage IIIA
Engine - Tier 4 Final/Stage Iv
Emissions	Tier 4/Stage IV
General Specifications
Bucket Capacity (Since 2016)	3.3 - 12.0
Bucket Capacity (Since 2017)	3.3 - 12.0 (2.5 - 9.2)
Bucket Capacity (2019)	3.3 - 12.0 (2.5 - 9.2)
Bucket Capacity (2020)	3.3 - 12.0 (2.5 - 9.2)
Bucket Capacity (Since 2021)	4.19 - 9.68 (3.2 - 7.4)
Bucket Capacity (2022)	4.19 - 9.68 (3.2 - 7.4)
Engine Power (Since 2016)	276 hp (206 kw)
Engine Power (Since 2017)	276 (206)
Engine Power (2019)	276 (206)
Engine Power (2020)	276 (206)
Engine Power (2021)	276 (206)
Engine Power (2022)	276 (206)
Engine type (Since 2016)	Cat C9.3 ACERT
Engine type (2017)	Cat C9.3 ACERT
Engine type (2019)	Cat C9.3 ACERT
Engine type (Since 2020)	Cat C9.3
Engine type (2021)	Cat C9.3
Engine type (2022)	Cat C9.3
Max Dump Height (Since 2016)	4 ft (1 m)
Max Dump Height (Since 2017)	4.4 (1.3)
Max Dump Height (Since 2019)	9.8 (3.0)
Max Dump Height (2020)	9.8 (3.0)
Operating Weight (Since 2016)	51,176 lbs (23,213 kg)
Operating Weight (Since 2017)	51,176 (23,213)
Operating Weight (2019)	51,176 (23,213)
Operating Weight (2020)	51,176 (23,213)
Operating Weight (2021)	51,176 (23,213)
Operating Weight (2022)	51,176 (23,213)
Tip Load (Since 2021)	36,711 (16,652)
Tip Load (2022)	36,711 (16,652)
Travel Speed(Fwd/Rev) (Since 2021)	24.9 / 24.9 mph
Travel Speed(Fwd/Rev) (2022)	24.9 / 24.9 mph
Hydraulic System
Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise	1.4 s
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down	2.6 s
Hydraulic Cycle Time - Rated Payload - Raise From Carry Position	6.1 s
Hydraulic Cycle Time - Rated Payload - Total	10.1 s
Hydraulic Cycle Time - Total	10.1 s
Implement Pump Type	Variable Displacement Piston
Implement System - Maximum Operating Pressure	4,496 psi
Implement System - Maximum Pump Output At 2,200 Rpm	95 gpm (360 lpm)
Implement System - Optional 3rd/4th Function Maximum Flow	69 gpm (261 lpm)
Implement System - Optional 3rd/4th Function Maximum Pressure	3,000 psi
Operating Specifications
Breakout Force	38,984 lbs (17,683 kg)
Note (1)	For a machine configuration as defined under ?Weight.?
Note (2)	Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load - Full 37 Degrees Turn - No Tire Deflection	34,873 lbs (15,818 kg)
Static Tipping Load - Full 37 Degrees Turn - With Tire Deflection	32,329 lbs (14,664 kg)
Operational
Operating Weight	51,176 lbs (23,213 kg)
Service Refill Capacities
Cooling System	19 gal (72 l)
Crankcase	7 gal (25 l)
Def Tank	4 gal (17 l)
Def Tank*	4 gal (17 l)
Differential - Final Drives - Front	15 gal (57 l)
Differential - Final Drives - Rear	15 gal (57 l)
Fuel Tank	83 gal (313 l)
Hydraulic Tank	33 gal (125 l)
Note	*Must meet the requirements outlined in ISO 22241-1.
Transmission	16 gal (59 l)
Sound
Exterior Sound Power Level - Iso 6395:2008	109 dB(A)
Exterior Sound Pressure Level - Sae J88:2013	76 dB(A)
Note	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (1)	These sound values are for specific operating conditions only.
Note (2)	Machine and operator sound levels will vary at different engine and/or cooling fan speeds.
Note (3)	Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained.
Note (4)	Hearing protection also may be needed when the doors and/or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level - Iso 6396:2008	70 dB(A)
With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)**	108 LWA***
With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)**	69 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008)	109 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013)	76 dB(A)*
With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)	70 dB(A)
Transmission
Forward - 1	4 mph (6 kph)
Forward - 2	8 mph (13 kph)
Forward - 3	15 mph (24 kph)
Forward - 4	25 mph (40 kph)
Note	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.
Reverse - 1	4 mph (7 kph)
Reverse - 2	9 mph (14 kph)
Reverse - 3	16 mph (26 kph)
Reverse - 4	25 mph (40 kph)
Weights
Note	Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.2 m3 (5.5 yd3) general purpose bucket with BOCE.
Operating Weight	51,176 lbs (23,213 kg)