Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $246,000.00 USD
Apply for Financing| Hours: | 4421 |
| Serial Number: | LSJ01948 |
| Machine Location: | WINCHESTER, VA |
| More Information: | https://catused.com/cu/10085339 |
Supplied by HeavyEquipmentData.com →
| Bucket Capacities | |
| Bucket Range | 3.20-9.94 m (4.19-13.0 yd) |
| Buckets | |
| Bucket Capacities | 3.20-9.94 m (4.19-13.0 yd) |
| Dimensions | |
| Height | 12 ft (4 m) |
| Length | 31 ft (9 m) |
| Weight | 54,871 lbs (24,889 kg) |
| Width | 10 ft (3 m) |
| Dimensions - High Lift | |
| Centerline Of Rear Axle To Edge Of Counterweight | 8 ft (2 m) |
| Centerline Of Rear Axle To Hitch | 6 ft (2 m) |
| Ground Clearance | 1 ft (0 m) |
| Height - Top Of Exhaust Pipe | 12 ft (4 m) |
| Height - Top Of Hood | 9 ft (3 m) |
| Height - Top Of Rops | 12 ft (4 m) |
| Hinge Pin Height At Carry | 3 ft (1 m) |
| Hinge Pin Height At Maximum Lift | 16 ft (5 m) |
| Lift Arm Clearance At Maximum Lift | 14 ft (4 m) |
| Maximum Width Over Tires | 10 ft (3 m) |
| Note | All dimensions are approximate and based on L3 XHA2 tires. |
| Overall Length - Without Bucket | 27 ft (8 m) |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 71 degrees |
| Rack Back At Ground | 39 degrees |
| Tread Width | 7 ft (2 m) |
| Wheel Base | 12 ft (4 m) |
| Dimensions - Standard Lift | |
| Centerline Of Rear Axle To Edge Of Counterweight | 8 ft (2 m) |
| Centerline Of Rear Axle To Hitch | 6 ft (2 m) |
| Ground Clearance | 1 ft (0 m) |
| Height - Top Of Exhaust Pipe | 12 ft (4 m) |
| Height - Top Of Hood | 9 ft (3 m) |
| Height - Top Of Rops | 12 ft (4 m) |
| Hinge Pin Height At Carry | 2 ft (1 m) |
| Hinge Pin Height At Maximum Lift | 15 ft (4 m) |
| Lift Arm Clearance At Maximum Lift | 13 ft (4 m) |
| Maximum Width Over Tires | 10 ft (3 m) |
| Note | All dimensions are approximate and based on L3 XHA2 tires. |
| Overall Length - Without Bucket | 26 ft (8 m) |
| Rack Back - Carry Height | 50 degrees |
| Rack Back - Maximum Lift | 56 degrees |
| Rack Back At Ground | 41 degrees |
| Tread Width | 7 ft (2 m) |
| Wheel Base | 12 ft (4 m) |
| Engine | |
| Displacement | 568 cu in (9,308 cu cm) |
| Engine Model | Cat C9.3 ACERT |
| Maximum Net Power - 1,700 Rpm - Iso 9249 | 299 hp (223 kw) |
| Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric | 303 hp (226 kw) |
| Maximum Net Power - 1,700 Rpm - Sae J1349 | 299 hp (223 kw) |
| Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric | 303 hp (226 kw) |
| Maximum Net Torque - 1,000 Rpm | 1,204 lbs ft (1,632 nm) |
| Maximum Net Torque - 1,100 Rpm | 1,220 lbs ft (1,654 nm) |
| Maximum Power - 1,800 Rpm - Iso 14396 | 331 hp (247 kw) |
| Maximum Power - 1,800 Rpm - Iso 14396 - Metric | 336 hp (251 kw) |
| Maximum Power - 1,800 Rpm - Sae J1995 | 337 hp (251 kw) |
| Maximum Power - 1,800 Rpm - Sae J1995 - Metric | 341 hp (254 kw) |
| Net Power - Iso 9249 | 299 hp (223 kw) |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
| Peak Gross Torque - 1,200 Rpm - Iso 14396 | 1,261 lbs ft (1,710 nm) |
| Peak Gross Torque - 1,200 Rpm - Sae J1995 | 1,275 lbs ft (1,729 nm) |
| Engine - Tier 3/Stage Iiia Equivalent | |
| Emissions | Tier 3/Stage IIIA |
| Engine - Tier 4 Final/Stage Iv | |
| Emissions | Tier 4/Stage IV |
| General Specifications | |
| Bucket Capacity (Since 2016) | 3.8 - 13.0 |
| Bucket Capacity (Since 2017) | 3.8 - 13.0 (2.9 - 9.9) |
| Bucket Capacity (Since 2021) | 4.19 - 13 (3.2 - 9.9) |
| Engine Power (Since 2016) | 299 hp (223 kw) |
| Engine Power (Since 2017) | 299 (223) |
| Engine type (Since 2016) | Cat C9.3 ACERT |
| Engine type (Since 2020) | Cat C9.3 |
| Max Dump Height (Since 2016) | 4 ft (1 m) |
| Max Dump Height (Since 2017) | 4.4 (1.3) |
| Max Dump Height (Since 2019) | 10.3 (3.1) |
| Operating Weight (Since 2016) | 54,871 lbs (24,885 kg) |
| Operating Weight (Since 2017) | 54,871 (24,889) |
| Tip Load (Since 2021) | 40,779 (18,497) |
| Travel Speed(Fwd/Rev) (Since 2021) | 24.9 / 24.9 mph |
| Hydraulic System | |
| Hydraulic Cycle Time - Total | 10.7 s |
| Implement Pump Type | Variable Displacement Piston |
| Implement System - Maximum Operating Pressure | 4,496 psi |
| Implement System - Maximum Pump Output At 2,200 Rpm | 95 gpm (360 lpm) |
| Operating Specifications | |
| Breakout Force | 44,075 lbs (19,989 kg) |
| Note (1) | For a machine configuration as defined under ?Weight.? |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 37 Degrees Turn - No Tire Deflection | 38,396 lbs (17,413 kg) |
| Static Tipping Load - Full 37 Degrees Turn - With Tire Deflection | 35,626 lbs (16,157 kg) |
| Operational | |
| Operating Weight | 54,871 lbs (24,885 kg) |
| Service Refill Capacities | |
| Cooling System | 19 gal (72 l) |
| Crankcase | 7 gal (25 l) |
| Def Tank | 4 gal (17 l) |
| Differential - Final Drives - Front | 15 gal (57 l) |
| Differential - Final Drives - Rear | 15 gal (57 l) |
| Fuel Tank | 80 gal (302 l) |
| Hydraulic Tank | 33 gal (125 l) |
| Transmission | 14 gal (54 l) |
| Sound | |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Note (2) | **For machines in European Union countries and in countries that adopt the ?EU Directives.? |
| Note (3) | ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
| With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)** | 108 LWA*** |
| With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)** | 69 dB(A) |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008) | 109 dB(A) |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013) | 76 dB(A)* |
| With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008) | 70 dB(A) |
| Transmission | |
| Forward - 1 | 4 mph (7 kph) |
| Forward - 2 | 8 mph (13 kph) |
| Forward - 3 | 14 mph (23 kph) |
| Forward - 4 | 25 mph (39 kph) |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius. |
| Reverse - 1 | 5 mph (8 kph) |
| Reverse - 2 | 9 mph (15 kph) |
| Reverse - 3 | 17 mph (27 kph) |
| Reverse - 4 | 25 mph (39 kph) |
| Weights | |
| Note | Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.8 m3 (6.28 yd3) general purpose bucket with BOCE. |
| Operating Weight | 54,871 lbs (24,885 kg) |