| Axles |
|
Front |
Fixed |
|
Maximum Single-Wheel Rise And Fall |
23 in (57 cm)
|
|
Rear |
Oscillating ?13 degrees |
| Brakes |
|
Brakes |
Brakes meet ISO 3450:2011 standards |
| Bucket Capacities |
|
Bucket Range |
4.6-12.0 m (6.0-15.75 yd) |
| Buckets |
|
Bucket Capacities |
4.6-12.0 m (6.0-15.75 yd) |
| Cab |
|
Rops/Fops |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
| Dimensions |
|
Height |
13 ft (4 m)
|
|
Length |
33 ft (10 m)
|
|
Weight |
78,402 lbs (35,563 kg)
|
|
Width |
11 ft (3 m)
|
| Dimensions - Standard Lift |
|
Centerline Of Rear Axle To Edge Of Counterweight |
9 ft (3 m)
|
|
Centerline Of Rear Axle To Hitch |
6 ft (2 m)
|
|
Ground Clearance |
1 ft (0 m)
|
|
Height - Top Of Exhaust Pipe |
12 ft (4 m)
|
|
Height - Top Of Hood |
10 ft (3 m)
|
|
Height - Top Of Rops |
13 ft (4 m)
|
|
Hinge Pin Height At Carry |
3 ft (1 m)
|
|
Hinge Pin Height At Maximum Lift |
16 ft (5 m)
|
|
Lift Arm Clearance At Maximum Lift |
13 ft (4 m)
|
|
Maximum Width Over Tires |
12 ft (4 m)
|
|
Note |
All dimensions are approximate and based on Bridgestone 875/65R29 VLTS L4 radial tires. |
|
Overall Length - Without Bucket |
28 ft (9 m)
|
|
Rack Back - Carry Height |
48 degrees |
|
Rack Back - Maximum Lift |
57 degrees |
|
Rack Back At Ground |
42 degrees |
|
Tread Width |
8 ft (3 m)
|
|
Wheel Base |
13 ft (4 m)
|
| Engine |
|
Displacement |
763 cu in (12,503 cu cm)
|
|
Engine Model |
Cat C13 ACERT |
|
Maximum Net Power - 1,700 Rpm - Iso 9249 |
398 hp (297 kw)
|
|
Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric |
404 hp (301 kw)
|
|
Maximum Net Power - 1,700 Rpm - Sae J1349 |
398 hp (297 kw)
|
|
Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric |
404 hp (301 kw)
|
|
Maximum Net Power - 1,800 Rpm - Iso 9249 |
373 hp (278 kw)
|
|
Maximum Net Power - 1,800 Rpm - Iso 9249 - Metric |
378 hp (282 kw)
|
|
Maximum Net Power - 1,800 Rpm - Sae J1349 |
373 hp (278 kw)
|
|
Maximum Net Power - 1,800 Rpm - Sae J1349 - Metric |
378 hp (282 kw)
|
|
Maximum Net Torque - 1,000 Rpm |
1,505 lbs ft (2,040 nm)
|
|
Maximum Net Torque - 1,100 Rpm |
1,518 lbs ft (2,058 nm)
|
|
Maximum Power - 1,700 Rpm - Iso 14396 |
430 hp (321 kw)
|
|
Maximum Power - 1,700 Rpm - Iso 14396 - Metric |
436 hp (325 kw)
|
|
Maximum Power - 1,700 Rpm - Sae J1995 |
436 hp (325 kw)
|
|
Maximum Power - 1,700 Rpm - Sae J1995 - Metric |
442 hp (330 kw)
|
|
Maximum Power - 1,800 Rpm - Iso 14396 |
406 hp (303 kw)
|
|
Maximum Power - 1,800 Rpm - Iso 14396 - Metric |
412 hp (307 kw)
|
|
Maximum Power - 1,800 Rpm - Sae J1995 |
412 hp (307 kw)
|
|
Maximum Power - 1,800 Rpm - Sae J1995 - Metric |
417 hp (311 kw)
|
|
Net Power - Iso 9249 |
398 hp (297 kw)
|
|
Note |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
|
Peak Gross Torque - 1,200 Rpm - Iso 14396 |
1,609 lbs ft (2,181 nm)
|
|
Peak Gross Torque - 1,200 Rpm - Sae J1995 |
1,627 lbs ft (2,206 nm)
|
|
Peak Gross Torque - 1,300 Rpm - Iso 14396 |
1,602 lbs ft (2,172 nm)
|
|
Peak Gross Torque - 1,300 Rpm - Sae J1995 |
1,617 lbs ft (2,192 nm)
|
|
Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent: Maximum Power - Sae J1995 |
436 hp (325 kw)
|
|
U.S. Epa Tier 4 Final/Eu Stage Iv - Maximum Power - Sae J1995 |
436 hp (325 kw)
|
| Engine - Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent |
|
Bore |
5 in (13 cm)
|
|
Displacement |
763 cu in (12,503 cu cm)
|
|
Emissions |
Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards. |
|
Engine Model |
Cat C13 ACERT |
|
Maximum Net Power - 1,800 Rpm - Sae J1349 |
373 hp (278 kw)
|
|
Maximum Net Torque - 1,000 Rpm - Sae J1349 |
1,505 lbs ft (2,040 nm)
|
|
Maximum Power - 1,800 Rpm - Sae J1995 |
412 hp (307 kw)
|
|
Peak Gross Torque - 1,300 Rpm - Sae J1995 |
1,617 lbs ft (2,192 nm)
|
|
Stroke |
6 in (16 cm)
|
| Engine - Tier 3/Stage Iiia Equivalent |
|
Emissions |
Tier 3/Stage IIIA |
| Engine - Tier 4 Final/Stage Iv |
|
Bore |
5 in (13 cm)
|
|
Displacement |
763 cu in (12,503 cu cm)
|
|
Emissions |
Tier 4/Stage IV |
|
Engine Model |
Cat C13 ACERT |
|
Maximum Net Power - 1,700 Rpm - Sae J1349 |
398 hp (297 kw)
|
|
Maximum Net Torque - 1,100 Rpm - Sae J1349 |
1,518 lbs ft (2,058 nm)
|
|
Maximum Power - 1,700 Rpm - Sae J1995 |
436 hp (325 kw)
|
|
Note (1) |
The power ratings apply at the stated speed when tested under the reference conditions for the specified standards. |
|
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment. |
|
Note (3) |
The gross power advertised is with the fan at maximum speed. |
|
Peak Gross Torque - 1,200 Rpm - Sae J1995 |
1,627 lbs ft (2,206 nm)
|
|
Stroke |
6 in (16 cm)
|
| General Specifications |
|
Bucket Capacity (Since 2016)
|
6.0 - 15.8 |
|
Bucket Capacity (Since 2017)
|
6.0 - 15.8 (4.6 - 12.1) |
|
Bucket Capacity (2019)
|
6.0 - 15.8 (4.6 - 12.1) |
|
Bucket Capacity (2020)
|
6.0 - 15.8 (4.6 - 12.1) |
|
Bucket Capacity (Since 2021)
|
6 - 15.75 (4.6 - 12) |
|
Engine Power (Since 2016)
|
398 hp (297 kw)
|
|
Engine Power (Since 2017)
|
398 (297) |
|
Engine Power (2019)
|
398 (297) |
|
Engine Power (2020)
|
398 (297) |
|
Engine Power (2021)
|
398 (297) |
|
Engine type (Since 2016)
|
Cat C13 ACERT |
|
Engine type (2017)
|
Cat C13 ACERT |
|
Engine type (2019)
|
Cat C13 ACERT |
|
Engine type (Since 2020)
|
Cat C13 |
|
Engine type (2021)
|
Cat C13 |
|
Max Dump Height (Since 2016)
|
5 ft (2 m)
|
|
Max Dump Height (Since 2017)
|
5.1 (1.6) |
|
Max Dump Height (Since 2019)
|
11.1 (3.4) |
|
Max Dump Height (2020)
|
11.1 (3.4) |
|
Operating Weight (Since 2016)
|
78,402 lbs (35,556 kg)
|
|
Operating Weight (Since 2017)
|
78,402 (35,563) |
|
Operating Weight (2019)
|
78,402 (35,563) |
|
Operating Weight (2020)
|
78,402 (35,563) |
|
Operating Weight (2021)
|
78,402 (35,563) |
|
Tip Load (Since 2021)
|
54,640 (24,784) |
|
Travel Speed(Fwd/Rev) (Since 2021)
|
23.3 / 24.9 mph |
| Hydraulic System |
|
Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise |
1.7 s |
|
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down |
3.1 s |
|
Hydraulic Cycle Time - Rated Payload - Raise From Carry Position |
5.3 s |
|
Hydraulic Cycle Time - Rated Payload - Total |
10.1 s |
|
Hydraulic Cycle Time - Total |
10.1 s |
|
Implement Pump Type |
Variable Displacement Piston |
|
Implement System - Maximum Operating Pressure |
4,975 psi |
|
Implement System - Maximum Pump Output At 2,250 Rpm |
119 gpm (450 lpm)
|
|
Implement System - Optional 3rd Function Maximum Flow |
63 gpm (238 lpm)
|
|
Implement System - Optional 3rd Function Maximum Pressure |
3,159 psi |
| Operating Specifications |
|
Breakout Force |
58,450 lbs (26,508 kg)
|
|
Note |
Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
|
Note (1) |
For a machine configuration as defined under "Weight." |
|
Note (2) |
Full compliance to ISO 143971:2007 Sections 1 thru 6. |
|
Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection |
49,368 lbs (22,389 kg)
|
|
Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection |
46,473 lbs (21,076 kg)
|
| Operational |
|
Operating Weight |
78,402 lbs (35,556 kg)
|
| Service Refill Capacities |
|
Cooling System |
14 gal (53 l)
|
|
Crankcase |
10 gal (37 l)
|
|
Def Tank |
6 gal (21 l)
|
|
Differential - Final Drives - Front |
24 gal (92 l)
|
|
Differential - Final Drives - Rear |
24 gal (92 l)
|
|
Fuel Tank |
113 gal (426 l)
|
|
Hydraulic Tank |
48 gal (182 l)
|
|
Transmission |
20 gal (77 l)
|
| Sound |
|
Note |
*Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
|
Note (1) |
*Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
|
Note (2) |
**For machines in European Union countries and in countries that adopt the "EU Directives." |
|
Note (3) |
***European Union Directive "2000/14/EC" as amended by "2005/88/EC." |
|
With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)** |
109 LWA*** |
|
With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)** |
72 dB(A) |
|
With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008) |
112 dB(A) |
|
With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013) |
78 dB(A)* |
|
With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008) |
72 dB(A) |
| Sound - Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent |
|
Exterior Sound Power Level - Iso 6395:2008* |
112 dB(A) |
|
Exterior Sound Pressure Level - Sae J88:2013** |
78 dB(A) |
|
Note (1) |
The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment. |
|
Note (2) |
*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
|
Note (3) |
**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value. |
|
Operator Sound Pressure Level - Iso 6396:2008 |
75 dB(A) |
| Sound - Tier 4 Final/Stage Iv |
|
Exterior Sound Power Level - Iso 6395:2008* |
112 dB(A) |
|
Exterior Sound Pressure Level - Sae J88:2013** |
78 dB(A) |
|
Note (1) |
The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment. |
|
Note (2) |
*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. |
|
Note (3) |
**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value. |
|
Operator Sound Pressure Level - Iso 6396:2008 |
72 dB(A) |
| Transmission |
|
Forward - 1 |
4 mph (6 kph)
|
|
Forward - 2 |
7 mph (12 kph)
|
|
Forward - 3 |
13 mph (21 kph)
|
|
Forward - 4 |
23 mph (38 kph)
|
|
Note |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
|
Reverse - 1 |
4 mph (7 kph)
|
|
Reverse - 2 |
9 mph (14 kph)
|
|
Reverse - 3 |
15 mph (24 kph)
|
|
Reverse - 4 |
25 mph (39 kph)
|
| Weights |
|
Note |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles, secondary steering, sound suppression, and a 6.1 m3 (8.0 yd3) GP bucket with BOCE. |
|
Note (1) |
For 6.1 m3 (8.0 yd3) general purpose buckets with BOCE. |
|
Note (2) |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m3 (8.0 yd3) general purpose bucket with BOCE. |
|
Operating Weight |
78,402 lbs (35,556 kg)
|
