| Air Conditioning System |
|
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
| Axles |
|
Front |
Fixed |
|
Oscillation Angle |
13 degrees |
|
Oscillation Angle - Chain Arrangement |
9 degrees |
|
Rear |
Trunnion |
| Brakes |
|
Brakes |
ISO 3450:2011 |
| Buckets |
|
Bucket Capacities |
5-10.3 m (6.5-13.5 yd) |
| Dimensions |
|
Height |
14 ft (4 m)
|
|
Length |
38 ft (12 m)
|
|
Weight |
98,806 lbs (44,810 kg)
|
|
Width |
12 ft (4 m)
|
| Dimensions (Approximate) - High Lift Linkage |
|
B-Pin Height - Maximum Lift |
18 ft (5 m)
|
|
Clearance At Maximum Lift |
12 ft (4 m)
|
|
Front Axle Centerline To Bucket Tip |
15 ft (5 m)
|
|
Ground To Center Of Front Axle |
3 ft (1 m)
|
|
Ground To Fuel Tank Clearance |
2 ft (1 m)
|
|
Ground To Lower Hitch Clearance |
2 ft (0 m)
|
|
Ground To Top Of Exhaust Stacks |
13 ft (4 m)
|
|
Ground To Top Of Hood |
11 ft (3 m)
|
|
Ground To Top Of Rops |
14 ft (4 m)
|
|
Maximum Overall Height - Bucket Raised |
24 ft (7 m)
|
|
Maximum Overall Length |
38 ft (12 m)
|
|
Note |
- All dimensions are approximate.
- Specs are calculated with a 6.1 m (8.0 yd) rock bucket.
|
|
Reach - Maximum Lift |
7 ft (2 m)
|
|
Rear Axle - Centerline To Bumper |
10 ft (3 m)
|
|
Wheel Base |
13 ft (4 m)
|
| Dimensions (Approximate) - Standard Lift Linkage |
|
B-Pin Height - Maximum Lift |
16 ft (5 m)
|
|
Clearance At Maximum Lift |
10 ft (3 m)
|
|
Front Axle Centerline To Bucket Tip |
14 ft (4 m)
|
|
Ground To Center Of Front Axle |
3 ft (1 m)
|
|
Ground To Fuel Tank Clearance |
2 ft (1 m)
|
|
Ground To Lower Hitch Clearance |
2 ft (0 m)
|
|
Ground To Top Of Exhaust Stacks |
13 ft (4 m)
|
|
Ground To Top Of Hood |
11 ft (3 m)
|
|
Ground To Top Of Rops |
14 ft (4 m)
|
|
Maximum Overall Height - Bucket Raised |
22 ft (7 m)
|
|
Maximum Overall Length |
37 ft (11 m)
|
|
Note |
- All dimensions are approximate.
- Specs are calculated with a 6.1 m (8.0 yd) rock bucket.
|
|
Reach - Maximum Lift |
7 ft (2 m)
|
|
Rear Axle - Centerline To Bumper |
10 ft (3 m)
|
|
Wheel Base |
13 ft (4 m)
|
| Engine |
|
Bore |
5 in (14 cm)
|
|
Displacement |
927 cu in (15,191 cu cm)
|
|
Emissions |
Tier 4 Final/Stage IV, or China Nonroad StageIII and Brazil MAR-1 equivalent to Tier 3 andStage IIIA |
|
Engine Model |
Cat C15 ACERT |
|
Gross Power - Iso 14396 |
449 hp (335 kw)
|
|
Net Power |
373 hp (278 kw)
|
|
Peak Power Speed - 1,600 Rpm - Iso 14396 |
449 hp (335 kw)
|
|
Peak Power Speed - 1,600 Rpm - Iso 14396 (Din) |
455 hp (339 kw)
|
|
Peak Power Speed - 1,600 Rpm - Sae J1995 |
456 hp (340 kw)
|
|
Peak Power Speed - 1,600 Rpm - Sae J1995 (Din) |
462 hp (345 kw)
|
|
Peak Torque - 1,200 Rpm - Sae J1995 |
1,778 lbs ft (2,411 nm)
|
|
Rated Speed - 2,000 Rpm - Eec 80/1269 |
373 hp (278 kw)
|
|
Rated Speed - 2,000 Rpm - Eec 80/1269 (Din) |
378 hp (282 kw)
|
|
Rated Speed - 2,000 Rpm - Iso 9249 |
373 hp (278 kw)
|
|
Rated Speed - 2,000 Rpm - Iso 9249 (Din) |
378 hp (282 kw)
|
|
Rated Speed - 2,000 Rpm - Sae J1349 |
373 hp (278 kw)
|
|
Rated Speed - 2,000 Rpm - Sae J1349 (Din) |
378 hp (282 kw)
|
|
Stroke |
7 in (17 cm)
|
|
Torque Rise |
16 % |
| General Specifications |
|
Bucket Capacity (Since 2017)
|
6.5 - 13.5 (5.0 - 10.3) |
|
Bucket Capacity (2019)
|
6.5 - 13.5 (5.0 - 10.3) |
|
Bucket Capacity (2020)
|
6.5 - 13.5 (5.0 - 10.3) |
|
Bucket Capacity (2021)
|
6.5 - 13.5 (5.0 - 10.3) |
|
Bucket Capacity (2022)
|
6.5 - 13.5 (5.0 - 10.3) |
|
Bucket Capacity (2023)
|
6.5 - 13.5 (5.0 - 10.3) |
|
Bucket Capacity (2024)
|
6.5 - 13.5 (5.0 - 10.3) |
|
Engine Power (Since 2017)
|
373 (278) |
|
Engine Power (2019)
|
373 (278) |
|
Engine Power (2020)
|
373 (278) |
|
Engine Power (2021)
|
373 (278) |
|
Engine Power (2022)
|
373 (278) |
|
Engine Power (2023)
|
373 (278) |
|
Engine Power (2024)
|
373 (278) |
|
Engine type (Since 2017)
|
Cat C15 ACERT |
|
Engine type (2019)
|
Cat C15 ACERT |
|
Engine type (Since 2020)
|
Cat C15 |
|
Engine type (2021)
|
Cat C15 |
|
Engine type (2022)
|
Cat C15 |
|
Engine type (2023)
|
Cat C15 |
|
Engine type (2024)
|
Cat C15 |
|
Max Dump Height (Since 2017)
|
10.1 (3.1) |
|
Max Dump Height (2019)
|
10.1 (3.1) |
|
Max Dump Height (2020)
|
10.1 (3.1) |
|
Operating Weight (Since 2017)
|
98,806 (44,818) |
|
Operating Weight (2019)
|
98,806 (44,818) |
|
Operating Weight (2020)
|
98,806 (44,818) |
|
Operating Weight (2021)
|
98,806 (44,818) |
|
Operating Weight (2022)
|
98,806 (44,818) |
|
Operating Weight (2023)
|
98,806 (44,818) |
|
Operating Weight (2024)
|
98,806 (44,818) |
|
Tip Load (Since 2021)
|
63,404 (28,760) |
|
Tip Load (2022)
|
63,404 (28,760) |
|
Tip Load (2023)
|
63,404 (28,760) |
|
Tip Load (2024)
|
63,404 (28,760) |
|
Travel Speed (Since 2024)
|
24 / 25.4 mph |
|
Travel Speed(Fwd/Rev) (Since 2021)
|
24 / 25.4 mph |
|
Travel Speed(Fwd/Rev) (2022)
|
24 / 25.4 mph |
|
Travel Speed(Fwd/Rev) (2023)
|
24 / 25.4 mph |
| Hydraulic Cycle Times |
|
Dump |
3.5 s |
|
Lower |
5.2 s |
|
Lower Float Down |
4.3 s |
|
Rack Back |
4.5 s |
|
Raise |
9 s |
|
Total Hydraulic Cycle Time |
21.3 s |
| Hydraulic System - Lift/Tilt |
|
Lift Cylinder - Bore |
8 in (19 cm)
|
|
Lift Cylinder - Stroke |
45 in (114 cm)
|
|
Lift/Tilt System - Circuit |
Load Sense |
|
Lift/Tilt System - Pump |
2 110 cc variable displacement |
|
Maximum Flow At 2,165 Rpm |
123 gpm (466 lpm)
|
|
Relief Valve Setting - Lift/Tilt |
4,050 psi |
|
Tilt Cylinder - Bore |
7 in (17 cm)
|
|
Tilt Cylinder - Stroke |
28 in (72 cm)
|
| Hydraulic System - Steering |
|
Iso 5010:2007 - Maximum Flow At 1,400 Rpm |
52 gpm (197 lpm)
|
|
Iso 5010:2007 - Steering Cutoff Pressure |
4,000 psi |
|
Iso 5010:2007 - Steering System - Circuit |
Load Sense |
|
Iso 5010:2007 - Steering System - Pump |
Piston, variable displacement |
|
Iso 5010:2007 - Total Steering Angle |
70 degrees |
| Operating Specifications |
|
Bucket Capacity Range |
5-10.3 m (6.5-13.5 yd) |
|
Cat Truck Match - High Lift |
772/773 |
|
Cat Truck Match - Standard |
770/735/740/745 |
|
Operating Weight - High Lift |
104,005 lbs (47,176 kg)
|
|
Operating Weight - Standard |
97,785 lbs (44,355 kg)
|
|
Rated Payload - High Lift (Loose Material) |
24,200 lbs (10,977 kg)
|
|
Rated Payload - High Lift (Quarry Face) |
22,000 lbs (9,979 kg)
|
|
Rated Payload - Loose Material (High Lift) |
24,200 lbs (10,977 kg)
|
|
Rated Payload - Loose Material (Standard) |
28,000 lbs (12,701 kg)
|
|
Rated Payload - Quarry Face |
22,000 lbs (9,979 kg)
|
|
Rated Payload - Standard (Loose Material) |
28,000 lbs (12,701 kg)
|
|
Rated Payload - Standard (Quarry Face) |
22,000 lbs (9,979 kg)
|
| Operational |
|
Operating Weight |
98,806 lbs (44,818 kg)
|
| Operator'S Cab |
|
Rops/Fops |
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) |
| Service Refill Capacities |
|
Axle Oil - Differentials And Final Drives - Front |
49 gal (185 l)
|
|
Axle Oil - Differentials And Final Drives - Rear |
45 gal (170 l)
|
|
Cooling Systems |
26 gal (98 l)
|
|
Crankcase |
9 gal (34 l)
|
|
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage Iv Only) |
6 gal (23 l)
|
|
Fuel Tank |
141 gal (534 l)
|
|
Fuel Tank - Short Lift |
127 gal (481 l)
|
|
Hydraulic System - Tank Only |
34 gal (129 l)
|
|
Hydraulic System Factory Fill |
87 gal (329 l)
|
|
Transmission |
20 gal (76 l)
|
| Sound Performance - Standard |
|
Machine Sound Level (Iso 6395) |
112 dB(A) |
|
Note |
- The operator sound pressure level was measured according to thetest procedures and conditions specified in ISO 6396:2008. Themeasurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- The machine sound power level was measured according to thetest procedures and
|
|
Operator Sound Level (Iso 6396) |
72 dB(A) |
| Sound Performance - Suppression |
|
Machine Sound Level (Iso 6395) |
110 dB(A) |
|
Note |
- The operator sound pressure level was measured according to thetest procedures and conditions specified in ISO 6396:2008. Themeasurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- The machine sound power level was measured according to thetest procedures and
|
|
Operator Sound Level (Iso 6396) |
72 dB(A) |
| Transmission |
|
Direct Drive - Forward 2 |
8 mph (13 kph)
|
|
Direct Drive - Forward 3 |
14 mph (23 kph)
|
|
Direct Drive - Forward 4 |
24 mph (39 kph)
|
|
Direct Drive - Reverse 2 |
9 mph (14 kph)
|
|
Direct Drive - Reverse 3 |
16 mph (26 kph)
|
|
Direct Drive - Reverse 4 |
25 mph (41 kph)
|
|
Forward - 1 |
5 mph (8 kph)
|
|
Forward - 2 |
8 mph (13 kph)
|
|
Reverse - 1 |
5 mph (8 kph)
|
|
Reverse - 2 |
8 mph (13 kph)
|
|
Transmission Type |
Cat Planetary Power Shift |
