| Air Conditioning System |
|
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
| Axles |
|
Front |
Fixed |
|
Oscillation Angle |
13 degrees |
|
Rear |
Trunnion |
| Brakes |
|
Brakes |
ISO 3450:2011 |
| Buckets |
|
Bucket Capacities |
4.7-13 m3 (6.2-17 yd3) |
| Dimensions |
|
Height |
15 ft (4 m)
|
|
Length |
41 ft (13 m)
|
|
Weight |
116,362 lbs (52,781 kg)
|
|
Width |
13 ft (4 m)
|
| Dimensions (Approximate) - High Lift |
|
B-Pin Height - Maximum Lift |
19 ft (6 m)
|
|
Clearance At Maximum Lift |
13 ft (4 m)
|
|
Front Axle Centerline To Bucket Tip |
16 ft (5 m)
|
|
Ground To Bumper Clearance |
3 ft (1 m)
|
|
Ground To Center Of Axles |
3 ft (1 m)
|
|
Ground To Lower Hitch Clearance |
2 ft (1 m)
|
|
Ground To Top Of Exhaust Stacks |
15 ft (5 m)
|
|
Ground To Top Of Hood |
11 ft (3 m)
|
|
Ground To Top Of Rops |
14 ft (4 m)
|
|
Maximum Overall Height - Bucket Raised |
26 ft (8 m)
|
|
Maximum Overall Length |
41 ft (13 m)
|
|
Note |
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. |
|
Reach - Maximum Lift |
7 ft (2 m)
|
|
Rear Axle - Centerline To Bumper |
11 ft (3 m)
|
|
Wheel Base |
15 ft (5 m)
|
| Dimensions (Approximate) - Standard Lift |
|
B-Pin Height - Maximum Lift |
18 ft (5 m)
|
|
Clearance At Maximum Lift |
11 ft (3 m)
|
|
Front Axle Centerline To Bucket Tip |
15 ft (4 m)
|
|
Ground To Bumper Clearance |
3 ft (1 m)
|
|
Ground To Center Of Axles |
3 ft (1 m)
|
|
Ground To Lower Hitch Clearance |
2 ft (1 m)
|
|
Ground To Top Of Exhaust Stacks |
15 ft (5 m)
|
|
Ground To Top Of Hood |
11 ft (3 m)
|
|
Ground To Top Of Rops |
14 ft (4 m)
|
|
Maximum Overall Height - Bucket Raised |
25 ft (7 m)
|
|
Maximum Overall Length |
40 ft (12 m)
|
|
Note |
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. |
|
Reach - Maximum Lift |
7 ft (2 m)
|
|
Rear Axle - Centerline To Bumper |
11 ft (3 m)
|
|
Wheel Base |
15 ft (5 m)
|
| Engine |
|
Bore |
6 in (14 cm)
|
|
Displacement |
1,105 cu in (18,108 cu cm)
|
|
Emissions |
U.S. EPA Tier 4 Final/EU Stage IV |
|
Engine Model |
Cat C18 ACERT |
|
Gross Power - Iso 14396 |
580 hp (433 kw)
|
|
Net Power |
541 hp (403 kw)
|
|
Net Power - Sae J1349 |
541 hp (403 kw)
|
|
Peak Power Speed |
1,500 rpm |
|
Peak Power Speed - 1,500 Rpm - Gross - Iso 14396 |
580 hp (433 kw)
|
|
Peak Power Speed - 1,500 Rpm - Gross - Sae J1995 |
588 hp (438 kw)
|
|
Peak Power Speed - 1,500 Rpm - Net Power - Sae J1349 |
541 hp (403 kw)
|
|
Peak Torque @ (Speed) - Sae J1995 |
2,104 lbs ft (2,853 nm)
|
|
Rated Speed |
1,700 rpm |
|
Stroke |
7 in (18 cm)
|
|
Torque Rise |
58 % |
| General Specifications |
|
Bucket Capacity (Since 2019)
|
6.2 - 17 (4.7 - 13.0) |
|
Bucket Capacity (2020)
|
6.2 - 17 (4.7 - 13.0) |
|
Bucket Capacity (Since 2021)
|
6.2 - 17 (4.7 - 13) |
|
Bucket Capacity (2022)
|
6.2 - 17 (4.7 - 13) |
|
Bucket Capacity (2023)
|
6.2 - 17 (4.7 - 13) |
|
Bucket Capacity (2024)
|
6.2 - 17 (4.7 - 13) |
|
Engine Power (Since 2019)
|
541 (403) |
|
Engine Power (2020)
|
541 (403) |
|
Engine Power (2021)
|
541 (403) |
|
Engine Power (2022)
|
541 (403) |
|
Engine Power (2023)
|
541 (403) |
|
Engine Power (2024)
|
541 (403) |
|
Engine type (Since 2019)
|
Cat C18 ACERT |
|
Engine type (Since 2020)
|
Cat C18 |
|
Engine type (2021)
|
Cat C18 |
|
Engine type (2022)
|
Cat C18 |
|
Engine type (2023)
|
Cat C18 |
|
Engine type (2024)
|
Cat C18 |
|
Max Dump Height (Since 2019)
|
11.3 (3.4) |
|
Max Dump Height (2020)
|
11.3 (3.4) |
|
Operating Weight (Since 2019)
|
116,362 (52,781) |
|
Operating Weight (2020)
|
116,362 (52,781) |
|
Operating Weight (2021)
|
116,362 (52,781) |
|
Operating Weight (2022)
|
116,362 (52,781) |
|
Operating Weight (2023)
|
116,362 (52,781) |
|
Operating Weight (2024)
|
116,362 (52,781) |
|
Tip Load (Since 2021)
|
86,941 39,436) |
|
Tip Load (2022)
|
86,941 39,436) |
|
Tip Load (2023)
|
86,941 39,436) |
|
Tip Load (2024)
|
86,941 39,436) |
|
Travel Speed (Since 2024)
|
21.6 / 14.4 mph |
|
Travel Speed(Fwd/Rev) (Since 2021)
|
21.6 / 14.4 mph |
|
Travel Speed(Fwd/Rev) (2022)
|
21.6 / 14.4 mph |
|
Travel Speed(Fwd/Rev) (2023)
|
21.6 / 14.4 mph |
| Hydraulic Cycle Times |
|
Dump |
2.2 s |
|
Lower Float Down |
3.5 s |
|
Rack Back |
4.5 s |
|
Raise |
8 s |
|
Total Hydraulic Cycle Time |
18.2 s |
| Hydraulic System - Lift/Tilt |
|
Lift Cylinder - Bore |
9 in (22 cm)
|
|
Lift Cylinder - Stroke |
41 in (105 cm)
|
|
Lift/Tilt System - Circuit |
EH-Positive Flow Control, Flow Sharing |
|
Lift/Tilt System - Pump |
Variable displacement piston |
|
Maximum Flow At 1,400-1,600 Rpm |
153 gpm (579 lpm)
|
|
Relief Valve Setting - Lift/Tilt |
4,757 psi |
|
Tilt Cylinder - Bore |
9 in (22 cm)
|
|
Tilt Cylinder - Stroke |
27 in (69 cm)
|
| Hydraulic System - Steering |
|
Maximum Flow At 1,400-1,600 Rpm |
71 gpm (270 lpm)
|
|
Steering |
ISO 5010:2007 |
|
Steering Cut Off Pressure |
4,351 psi |
|
Steering Cycle Times - High Idle |
3.4 s |
|
Steering Cycle Times - Low Idle |
5.6 s |
|
Steering System - Circuit |
Pilot, load sensing |
|
Steering System - Pump |
Piston, variable displacement |
| Operating Specifications |
|
Bucket Capacity Range |
4.7-13 m3 (6.2-17 yd3) |
|
Operating Weight - High Lift |
119,618 lbs (54,249 kg)
|
|
Operating Weight - Standard |
116,362 lbs (52,772 kg)
|
|
Rated Payload - High Lift (Face Material) |
27,558 lbs (12,498 kg)
|
|
Rated Payload - High Lift (Loose Material) |
35,274 lbs (15,997 kg)
|
|
Rated Payload - Standard (Face Material) |
27,558 lbs (12,498 kg)
|
|
Rated Payload - Standard (Loose Material) |
35,274 lbs (15,997 kg)
|
| Operational |
|
Operating Weight |
116,362 lbs (52,772 kg)
|
| Operator'S Cab |
|
Rops/Fops |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
| Service Refill Capacities |
|
Cooling System - Jacket Water |
30 gal (114 l)
|
|
Cooling Systems - Power Train |
8 gal (30 l)
|
|
Diesel Exhaust Fluid Tank |
9 gal (33 l)
|
|
Differential - Final Drives - Front |
49 gal (185 l)
|
|
Differential - Final Drives - Rear |
49 gal (185 l)
|
|
Engine Crankcase |
16 gal (61 l)
|
|
Fuel Tank |
147 gal (556 l)
|
|
Hydraulic System - Implement/Steering |
126 gal (477 l)
|
|
Note |
All non-road Tier 4 Final/Stage IV diesel engines are required to use: The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less) or up to B20 biodiesel when feedstock meeting ASTM D7467 specifications is blended with ULSD. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. Only use DEF that meets ISO 22241-1 standards. |
|
Transmission |
16 gal (61 l)
|
| Sound Performance - Tier 4 Final/Stage Iv |
|
Machine Sound Level (Iso 6395) |
109 dB(A) |
|
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
|
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
|
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
|
Operator Sound Level (Iso 6396) |
72 dB(A) |
| Transmission |
|
Forward 1 (Virtual) |
4 mph (7 kph)
|
|
Forward 2 (Virtual) |
7 mph (11 kph)
|
|
Forward 3 (Virtual) |
14 mph (22 kph)
|
|
Forward 4 (Virtual) |
20 mph (32 kph)
|
|
Reverse 1 (Virtual) |
4 mph (7 kph)
|
|
Reverse 2 (Virtual) |
7 mph (11 kph)
|
|
Reverse 3 (Virtual) |
18 mph (28 kph)
|
|
Transmission Type |
Cat switched reluctance electric drive |
