| Axles |
|
Front |
Fixed |
|
Maximum Single-Wheel Rise And Fall |
23 in (57 cm)
|
|
Oscillation Angle |
11 degrees |
|
Rear |
Trunnion |
| Brakes |
|
Brakes |
Meet SAE/ISO 3450 1996. |
| Bucket |
|
Breakout Force |
63,066 lbs (28,606 kg)
|
|
Bucket Capacity - Heaped |
11 cu yd |
|
Bucket Capacity - Struck |
9 cu yd |
|
Bucket Width |
15 ft (4 m)
|
|
Dump Clearance At Max Raise |
13 ft (4 m)
|
| Buckets |
|
Bucket Capacities |
11 - 12 cyds |
|
Maximum Bucket Capacity |
12 cu yd |
| Cab |
|
Cab - Rops/Fops |
Meets SAE and ISO standards. |
|
Sound Performance |
Meets ANSI, SAE and ISO standards. |
| Dimensions |
|
Ground Clearance |
2 ft (1 m)
|
|
Height |
17 ft (5 m)
|
|
Length |
41 ft (13 m)
|
|
Length With Bucket On Ground |
41 ft (13 m)
|
|
Reach At Max Lift And Dump |
6 ft (2 m)
|
|
Weight |
168,617 lbs (76,483 kg)
|
|
Width |
13 ft (4 m)
|
|
Width Over Tires |
13 ft (4 m)
|
| Dimensions* |
|
Clearance At Maximum Lift /Dump - Hl |
15 ft (5 m)
|
|
Clearance At Maximum Lift/Dump - Std |
14 ft (4 m)
|
|
Full Turn Static Tipping Load At 35 Degrees |
84,311 lbs (38,243 kg)
|
|
Ground Clearance |
2 ft (0 m)
|
|
Height - Top Of Exhaust Stack |
16 ft (5 m)
|
|
Height - Top Of Rops/Fops |
17 ft (5 m)
|
|
Hinge Pin Height At Full Lift - Hl |
21 ft (6 m)
|
|
Hinge Pin Height At Full Lift - Std |
19 ft (6 m)
|
|
Overall Length - Hl |
45 ft (14 m)
|
|
Overall Length - Std |
42 ft (13 m)
|
|
Reach At Maximum Lift/Dump - Hl |
8 ft (3 m)
|
|
Reach At Maximum Lift/Dump - Std |
8 ft (3 m)
|
|
Straight Static Tipping Load - Hl |
97,338 lbs (44,152 kg)
|
|
Straight Static Tipping Load - Std |
93,457 lbs (42,391 kg)
|
|
Tread Width |
10 ft (3 m)
|
|
Turning Circle - Hl |
71 ft (22 m)
|
|
Turning Circle - Std |
68 ft (21 m)
|
|
Wheel Base Length |
15 ft (5 m)
|
|
Width - Over Tires |
13 ft (4 m)
|
| Engine |
|
Bore |
5 in (14 cm)
|
|
Displacement |
1,648 cu in (27,001 cu cm)
|
|
Engine Model |
3412E TA |
|
Engine Model |
Cat 3412E TA |
|
Net Power |
625 hp (466 kw)
|
|
Net Power - Caterpillar |
625 hp (466 kw)
|
|
Net Power - Din 70020 |
648 PS |
|
Net Power - Eec 80/1269 |
625 hp (466 kw)
|
|
Net Power - Iso 9249 |
625 hp (466 kw)
|
|
Net Power - Sae J1349 |
618 hp (461 kw)
|
|
Stroke |
6 in (15 cm)
|
| Hydraulic Cycle Times |
|
Dump |
2.9 s |
|
Lower Float Down - Empty |
9.2 s |
|
Raise |
9.2 s |
|
Total Hydraulic Cycle Time |
15.9 s |
| Hydraulic System |
|
Dump Time |
3 sec |
|
Lower Time |
4 sec |
|
Raise Time |
9 sec |
| Hydraulic System - Lift/Tilt |
|
Number Of Lift Cylinders |
2 |
|
Number Of Tilt Cylinders |
1 |
| Loader Hydraulic System |
|
Cylinders, Double Acting - Lift, Bore And Stroke |
234 mm x 1270 mm 9.25 in x 50 in |
|
Cylinders, Double Acting - Tilt, Bore And Stroke |
292 mm x 820 mm 11.5 in x 32.3 in |
|
Main Hydraulic System Output At 2,128 Rpm And 6900 Kpa (1,000 Psi) |
172 gpm (651 lpm)
|
|
Pilot System, Gear-Type Pump Output At 2,000 Rpm And 6900 Kpa (1,000 Psi) |
12 gpm (45 lpm)
|
|
Relief Valve Setting |
4,500 psi |
|
Relief Valve Setting - Low Idle |
350 psi |
| Operating Specifications |
|
Articulation Angle |
35 degrees |
|
Breakout Force |
137,841 lbs (62,524 kg)
|
|
Breakout Force - Hl |
120,498 lbs (54,657 kg)
|
|
Bucket Capacity Range |
8.4-9.2 m3 11-12 yd3 |
|
Dump Clearance |
15 ft (5 m)
|
|
Operating Weight - Hl |
183,539 lbs (83,252 kg)
|
|
Rated Payload |
33,000 lbs (14,969 kg)
|
|
Static Tipping Load - Full Turn |
108,892 lbs (49,393 kg)
|
|
Static Tipping Load - Full Turn - Hl |
86,085 lbs (39,048 kg)
|
|
Travel Speed |
13 mph (20 kph)
|
| Operational |
|
Fuel Capacity |
256 gal (970 l)
|
|
Hydraulic System Fluid Capacity |
115 gal (435 l)
|
|
Operating Weight |
162,018 lbs (73,490 kg)
|
|
Static Tipping Weight |
90,293 lbs (40,956 kg)
|
| Service Refill Capacities |
|
Cooling System |
50 gal (190 l)
|
|
Crankcase |
25 gal (95 l)
|
|
Differential - Final Drives - Front |
72 gal (271 l)
|
|
Differential - Final Drives - Rear |
69 gal (261 l)
|
|
Fuel Tank |
413 gal (1,563 l)
|
|
Hydraulic System - Including Tank |
115 gal (435 l)
|
|
Hydraulic System - Lift/Tilt And Brakes |
113 gal (428 l)
|
|
Hydraulic System - Steering And Engine Cooling Fan |
51 gal (191 l)
|
|
Hydraulic System - Tank Only |
46 gal (174 l)
|
|
Transmission |
29 gal (110 l)
|
| Steering |
|
Hydraulic Output At 2,128 Rpm And 6900 Kpa (1,000 Psi) |
108 gpm (409 lpm)
|
|
Minimum Turning Radius - Over Bucket |
407 in (1,034 cm)
|
|
Minimum Turning Radius - Over Bucket - Hl |
424 in (1,077 cm)
|
|
Relief Valve Setting |
4,500 psi |
|
Steering Angle - Each Direction |
35 degrees |
| Tires |
|
Tires (1) |
Choice of six tires. |
|
Tires (2) |
Tires used for measurement - 41.25/70-39 42 ply |
| Transmission |
|
Converter Drive - Forward 1 |
4 mph (7 kph)
|
|
Converter Drive - Forward 2 |
8 mph (12 kph)
|
|
Converter Drive - Forward 3 |
13 mph (21 kph)
|
|
Converter Drive - Reverse 1 |
5 mph (8 kph)
|
|
Converter Drive - Reverse 2 |
8 mph (13 kph)
|
|
Converter Drive - Reverse 3 |
14 mph (23 kph)
|
|
Direct Drive - Forward 1 |
Lock-up disabled |
|
Direct Drive - Forward 2 |
8 mph (13 kph)
|
|
Direct Drive - Forward 3 |
14 mph (22 kph)
|
|
Direct Drive - Reverse 1 |
5 mph (8 kph)
|
|
Direct Drive - Reverse 2 |
9 mph (14 kph)
|
|
Direct Drive - Reverse 3 |
15 mph (25 kph)
|
|
Forward - 1 |
4 mph (7 kph)
|
|
Forward - 2 |
8 mph (13 kph)
|
|
Forward - 3 |
14 mph (23 kph)
|
|
Max Speed - Forward |
14 mph (23 kph)
|
|
Max Speed - Reverse |
16 mph (25 kph)
|
|
Number Of Forward Gears |
3 |
|
Number Of Reverse Gears |
3 |
|
Reverse - 1 |
5 mph (8 kph)
|
|
Reverse - 2 |
9 mph (14 kph)
|
|
Reverse - 3 |
16 mph (25 kph)
|
|
Transmission Type |
Powershift |
