Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $189,000.00 USD
Apply for Financing| Hours: | 40439 |
| Serial Number: | H4C00590 |
| Machine Location: | CHIHUAHUA, ?? |
| More Information: | https://catused.com/cu/10121711 |
Supplied by HeavyEquipmentData.com →
| Axles | |
| Front | Fixed |
| Oscillation Angle | 10 degrees , 8 degrees with Stops |
| Rear | Oscillating |
| Brakes | |
| Brakes | Meets SAE J1473, OCT90 and ISO 3450:1992 |
| Bucket | |
| Breakout Force | 128,895 lbs (58,466 kg) |
| Bucket Capacity - Heaped | 16 cu yd |
| Bucket Capacity - Struck | 14 cu yd |
| Bucket Width | 16 ft (5 m) |
| Dump Clearance At Max Raise | 15 ft (5 m) |
| Buckets | |
| Bucket Capacities | 10.7-12.3 m3 (14-16 yd3) |
| Cab | |
| Cab - Rops/Fops | Meets SAE and ISO standards. |
| Rops/Fops | Meets SAE and ISO standards |
| Dimensions | |
| Ground Clearance | 2 ft (1 m) |
| Height | 19 ft (6 m) |
| Height To Top Of Cab | 19 ft (6 m) |
| Length | 52 ft (16 m) |
| Length With Bucket On Ground | 52 ft (16 m) |
| Reach At Max Lift And Dump | 8 ft (2 m) |
| Weight | 220,621 lbs (100,072 kg) |
| Wheelbase | 19 ft (6 m) |
| Width | 16 ft (5 m) |
| Width Over Tires | 18 ft (6 m) |
| Dimensions - High Lift - Approximate | |
| B-Pin Height - Maximum Lift | 25 ft (8 m) |
| Clearance At 45 Degrees Dump (Tooth Tip) | 15 ft (5 m) |
| Dump Angle At Maximum Lift | 50 degrees |
| Ground To Bumper Clearance | 4 ft (1 m) |
| Ground To Center Of Axles | 5 ft (1 m) |
| Ground To Lower Hitch Clearance | 2 ft (1 m) |
| Ground To Top Of Exhaust Stacks | 17 ft (5 m) |
| Ground To Top Of Hood | 13 ft (4 m) |
| Ground To Top Of Rops | 19 ft (6 m) |
| Maximum Overall Height - Bucket Raised | 33 ft (10 m) |
| Maximum Overall Length | 53 ft (16 m) |
| Rack Back Angle - Carry | 53 degrees |
| Rack Back Angle - Ground Level | 43 degrees |
| Rack Back Angle - Maximum Lift | 65 degrees |
| Reach - Maximum Lift | 7 ft (2 m) |
| Rear Axle - Centerline To Bumper | 14 ft (4 m) |
| Tread Width | 11 ft (3 m) |
| Wheel Base | 19 ft (6 m) |
| Dimensions - Standard Lift - Approximate | |
| B-Pin Height - Maximum Lift | 23 ft (7 m) |
| Clearance At 50 Degrees Dump (Tooth Tip) | 15 ft (4 m) |
| Dump Angle At Maximum Lift | 50 degrees |
| Ground To Bumper Clearance | 4 ft (1 m) |
| Ground To Center Of Axles | 5 ft (1 m) |
| Ground To Lower Hitch Clearance | 2 ft (1 m) |
| Ground To Top Of Exhaust Stacks | 17 ft (5 m) |
| Ground To Top Of Hood | 13 ft (4 m) |
| Ground To Top Of Rops | 19 ft (6 m) |
| Maximum Overall Height - Bucket Raised | 31 ft (9 m) |
| Maximum Overall Length | 52 ft (16 m) |
| Rack Back Angle - Carry | 53 degrees |
| Rack Back Angle - Ground Level | 43 degrees |
| Rack Back Angle - Maximum Lift | 65 degrees |
| Reach - Maximum Lift | 7 ft (2 m) |
| Rear Axle - Centerline To Bumper | 14 ft (4 m) |
| Tread Width | 11 ft (3 m) |
| Wheel Base | 19 ft (6 m) |
| Dimensions* | |
| Bumper Clearance | 4 ft (1 m) |
| Ground Clearance | 2 ft (1 m) |
| Height - Top Of Hood | 17 ft (5 m) |
| Height - Top Of Rops/Fops | 19 ft (6 m) |
| Wheel Base Length | 19 ft (6 m) |
| Engine | |
| Bore | 6 in (14 cm) |
| Displacement | 9 cu in (139 cu cm) |
| Emissions | U.S. EPA Tier 4 Final |
| Emissions (Tier 2 Equivalent): Gross Power - Iso 14396 | 884 hp (659 kw) |
| Emissions (Tier 2 Equivalent): Gross Power - Sae J1995 | 907 hp (676 kw) |
| Emissions (Tier 2 Equivalent): Net Power - Sae J1349 | 814 hp (607 kw) |
| Emissions (Tier 2 Equivalent): Net Power - Sae J1995 | 814 hp (607 kw) |
| Emissions (Tier 2 Equivalent): Peak Torque At 1,200 Rpm - Sae J1995 | 4,796 rpm |
| Emissions (Tier 2 Equivalent): Rated Speed | 1,750 rpm |
| Emissions (U.S. Epa Tier 4 Final): Gross Power - Iso 14396 | 884 hp (659 kw) |
| Emissions (U.S. Epa Tier 4 Final): Gross Power - Sae J1995 | 900 hp (671 kw) |
| Emissions (U.S. Epa Tier 4 Final): Net Power - Sae J1349 | 814 hp (607 kw) |
| Emissions (U.S. Epa Tier 4 Final): Net Power - Sae J1995 | 814 hp (607 kw) |
| Emissions (U.S. Epa Tier 4 Final): Peak Torque At 1,200 Rpm - Sae J1995 | 4,765 rpm |
| Emissions (U.S. Epa Tier 4 Final): Rated Speed | 1,750 rpm |
| Engine Make | 2,236 |
| Engine Model | C32 ACERT |
| Engine Model | Cat C32 with ACERT Technology |
| Gross Power | 904 hp (674 kw) |
| Gross Power - Sae J1995 | 904 hp (674 kw) |
| Gross Power*** | 900 hp (671 kw) |
| Net Power | 801 hp (597 kw) |
| Net Power*** | 814 hp (607 kw) |
| Note (Tier 2 Equivalent) (1) | These ratings apply at 1,750 rpm when tested under the specified standard conditions. |
| Note (Tier 2 Equivalent) (2) | Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed. |
| Note (Tier 4 Final) (1) | These ratings apply at 1,750 rpm when tested under the specified standard conditions. |
| Note (Tier 4 Final) (2) | Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed. |
| Number Of Cylinders | 12 |
| Power Measured @ | 1,750 rpm |
| Stroke | 6 in (16 cm) |
| General Specifications | |
| Bucket Capacity (Since 2016) | 14.0 - 16.0 |
| Bucket Capacity (Since 2017) | 14.0 - 16.0 (10.7 - 12.2) |
| Bucket Capacity (Since 2021) | 9.7 - 19.5 (7.4 - 14.9) |
| Engine Power (Since 2016) | 814 hp (607 kw) |
| Engine Power (Since 2017) | 814 (307) |
| Engine type (Since 2016) | Cat C32 ACERT |
| Engine type (Since 2020) | Cat C32 |
| Max Dump Height (Since 2016) | 8 ft (2 m) |
| Max Dump Height (Since 2017) | 7.8 (2.4) |
| Max Dump Height (Since 2019) | 14.8 (4.5) |
| Operating Weight (Since 2016) | 220,089 lbs (99,831 kg) |
| Operating Weight (Since 2017) | 220,089 (99,831) |
| Tip Load (Since 2021) | 136,365 61,854) |
| Travel Speed(Fwd/Rev) (Since 2021) | 14.2 / 15.4 mph |
| Hydraulic Cycle Times | |
| Dump | 1.8 s |
| Dump* | 1.8 s |
| Lower Float Down | 3.7 s |
| Lower Float Down - Empty | 3.7 s |
| Rack Back | 4.4 s |
| Raise | 9.4 s |
| Raise* | 9.4 s |
| Total Hydraulic Cycle Time | 14.9 s |
| Hydraulic System | |
| Relief Valve Setting | 4,500 psi |
| Hydraulic System - Lift/Tilt | |
| Lift Cylinder - Bore | 11 in (28 cm) |
| Lift Cylinder - Stroke | 45 in (115 cm) |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Displacement Piston |
| Maximum Flow At 1,850 Rpm | 254 gpm (961 lpm) |
| Relief Valve Setting - Lift/Tilt | 4,500 psi |
| Tilt Cylinder - Bore | 11 in (27 cm) |
| Tilt Cylinder - Stroke | 81 in (205 cm) |
| Hydraulic System - Steering | |
| Maximum Flow At 1,350 Rpm | 95 gpm (360 lpm) |
| Steering Cut Off Pressure | 4,500 psi |
| Steering Cycle Times - High Idle | 4.4 s |
| Steering Cycle Times - Low Idle | 6.4 s |
| Steering System - Circuit | Pilot, Load Sensing |
| Steering System - Pump | Piston, Variable Displacement |
| Loader Hydraulic System | |
| Lift Cylinder, Double Acting - Bore | 11 in (28 cm) |
| Lift Cylinder, Double Acting - Stroke | 45 in (115 cm) |
| Relief Valve Setting | 4,500 psi |
| Relief Valve Setting - Low Idle | 4,500 psi |
| Tilt Cylinder, Double Acting - Bore | 11 in (27 cm) |
| Tilt Cylinder, Double Acting - Stroke | 81 in (205 cm) |
| Model | |
| Serial Number Prefix | 880 |
| Operating Specifications | |
| Breakout Force | 128,895 lbs (58,466 kg) |
| Bucket Capacity Range | 10.7-12.3 m3 (14-16 yd3) |
| Operating Weight - High Lift | 226,249 lbs (102,625 kg) |
| Operating Weight - High Lift** | 221,847 lbs (100,628 kg) |
| Operating Weight - Standard | 220,089 lbs (99,831 kg) |
| Operating Weight - Standard Lift | 214,948 lbs (97,499 kg) |
| Operating Weight - Standard Lift* | 220,089 lbs (99,831 kg) |
| Rated Payload - High Lift | 42,000 lbs (19,051 kg) |
| Rated Payload - High Lift (Face Material) | 46,297 lbs (21,000 kg) |
| Rated Payload - Standard (Face Material) | 52,911 lbs (24,000 kg) |
| Rated Payload - Standard Lift | 48,000 lbs (21,772 kg) |
| Operating Specifications - High Lift | |
| Breakout Force | 129,777 lbs (58,866 kg) |
| Static Tipping Load - At 35 Degrees Articulation | 96,853 lbs (43,932 kg) |
| Operating Specifications - High Lift* | |
| Breakout Force | 127,813 lbs (57,975 kg) |
| Static Tipping Load - At 35 Degrees Articulation | 114,760 lbs (52,054 kg) |
| Operating Specifications - Standard Lift | |
| Breakout Force | 128,895 lbs (58,466 kg) |
| High Lift Breakout Force | 127,775 lbs (57,958 kg) |
| Standard Lift Breakout Force | 128,895 lbs (58,466 kg) |
| Static Tipping Load - At 35 Degrees Articulation | 113,159 lbs (51,328 kg) |
| Operating Specifications - Standard Lift* | |
| Breakout Force | 123,439 lbs (55,991 kg) |
| Static Tipping Load - At 35 Degrees Articulation | 122,010 lbs (55,343 kg) |
| Operational | |
| Alternator Supplied Amperage | 150 amps |
| Cooling System Fluid Capacity | 77 gal (291 l) |
| Engine Oil Fluid Capacity | 32 gal (121 l) |
| Front Axle/Diff Fluid Capacity | 95 gal (360 l) |
| Fuel Capacity | 413 gal (1,563 l) |
| Operating Voltage | 24 V |
| Operating Weight | 214,948 lbs (97,499 kg) |
| Rear Axle/Diff Fluid Capacity | 91 gal (344 l) |
| Static Tipping Weight | 113,450 lbs (51,460 kg) |
| Tire Size | 45/65 45 |
| Transmission Fluid Capacity | 45 gal (170 l) |
| Service Refill Capacities | |
| Ac Oil | 0 gal (0 l) |
| Ac Refrigerant | 6 lbs (3 kg) |
| Cooling System | 77 gal (291 l) |
| Cooling Systems | 77 gal (291 l) |
| Crankcase | 32 gal (121 l) |
| Differential - Final Drives - Front | 95 gal (360 l) |
| Differential - Final Drives - Rear | 91 gal (344 l) |
| Engine Crankcase | 32 gal (121 l) |
| Fuel Tank | 413 gal (1,563 l) |
| Fuel Tank - Standard | 413 gal (1,563 l) |
| Hydraulic System - Implement | 86 gal (326 l) |
| Hydraulic System - Steering | 42 gal (159 l) |
| Hydraulic Tank - Implement | 86 gal (326 l) |
| Hydraulic Tank - Steering/Brake | 42 gal (159 l) |
| Transmission | 45 gal (170 l) |
| Windshield Washer Fluid | 5 gal (19 l) |
| Sound Performance | |
| Hearing Protection | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Machine Sound Power Level - Sound Suppressed Machine Configuration | The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Machine Sound Power Level - Standard Machine Configuration | The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Operator Sound Pressure Level | The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Performance | Performance |
| Tires | |
| Tires | Choose from a variety of tires to match your application. |
| Transmission | |
| Converter Drive - Forward 1 | 4 mph (7 kph) |
| Converter Drive - Forward 2 | 8 mph (12 kph) |
| Converter Drive - Forward 3 | 13 mph (21 kph) |
| Converter Drive - Reverse 1 | 5 mph (7 kph) |
| Converter Drive - Reverse 2 | 8 mph (13 kph) |
| Converter Drive - Reverse 3 | 14 mph (22 kph) |
| Direct Drive - Forward 1 | Lock-up Disabled |
| Direct Drive - Forward 2 | 8 mph (13 kph) |
| Direct Drive - Forward 3 | 14 mph (23 kph) |
| Direct Drive - Reverse 1 | 5 mph (8 kph) |
| Direct Drive - Reverse 2 | 9 mph (14 kph) |
| Direct Drive - Reverse 3 | 15 mph (25 kph) |
| Forward - 1 | 4 mph (7 kph) |
| Forward - 2 | 7 mph (12 kph) |
| Forward - 3 | 13 mph (20 kph) |
| Max Speed - Forward | 13 mph (21 kph) |
| Max Speed - Reverse | 14 mph (22 kph) |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Reverse - 1 | 5 mph (8 kph) |
| Reverse - 2 | 8 mph (13 kph) |
| Reverse - 3 | 14 mph (22 kph) |
| Transmission Type | Cat Planetary Power Shift |
| Transmission Type | Planetary, powershift |
| Weights | |
| Operating Weight - High Lift | 226,249 lbs (102,625 kg) |
| Operating Weight - High Lift** | 221,847 lbs (100,628 kg) |
| Operating Weight - Standard Lift | 214,948 lbs (97,499 kg) |
| Operating Weight - Standard Lift* | 220,089 lbs (99,831 kg) |