Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $1,400,000.00 USD
Apply for Financing| Hours: | 12980 |
| Serial Number: | LWA00425 |
| Machine Location: | CIUDAD OBREGóN, SONORA, MEXICO |
| More Information: | https://catused.com/cu/10120411 |
Supplied by HeavyEquipmentData.com →
| Axles | |
| Front | Fixed |
| Oscillation Angle | 10 degrees |
| Rear | Trunnion |
| Bucket | |
| Breakout Force | 159,562 lbs (72,376 kg) |
| Bucket Capacity - Heaped | 17 cu yd |
| Bucket Capacity - Struck | 13 cu yd |
| Bucket Width | 17 ft (5 m) |
| Dump Clearance At Max Raise | 15 ft (5 m) |
| Buckets | |
| Bucket Capacities | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Dimensions | |
| Ground Clearance | 2 ft (1 m) |
| Height | 18 ft (6 m) |
| Height To Top Of Cab | 20 ft (6 m) |
| Hinge Pin - Max Height | 23 ft (7 m) |
| Length | 50 ft (15 m) |
| Length With Bucket On Ground | 50 ft (15 m) |
| Reach At Max Lift And Dump | 8 ft (3 m) |
| Weight | 294,687 lbs (133,668 kg) |
| Wheelbase | 19 ft (6 m) |
| Width | 17 ft (5 m) |
| Width Over Tires | 17 ft (5 m) |
| Engine | |
| Displacement | 1,959 cu in (32,101 cu cm) |
| Engine Make | 2,236 |
| Engine Model | C32 ACERT |
| Gross Power | 1,050 hp (783 kw) |
| Net Power | 973 hp (726 kw) |
| Number Of Cylinders | 12 |
| Engine - Tier 2 Equivalent | |
| Bore | 6 in (14 cm) |
| Displacement | 1,959 cu in (32,102 cu cm) |
| Emissions | U.S. EPA Tier 2 Equivalent |
| Engine Model | Cat C32 with ACERT Technology |
| Gross Power - Sae J1995 | 1,041 hp (776 kw) |
| Net Power - Eec 80/1269 | 973 hp (726 kw) |
| Net Power - Iso 14396 | 1,024 hp (764 kw) |
| Net Power - Iso 9249 | 973 hp (726 kw) |
| Net Power - Sae J1349 | 964 hp (719 kw) |
| Note | Standard ambient cooling. |
| Peak Torque - 1,250 Rpm | 4,034 lbs ft (5,469 nm) |
| Rated Speed | 1,800 rpm |
| Stroke | 6 in (16 cm) |
| Torque Rise | 33% |
| Engine - Tier 4 Final | |
| Bore | 6 in (14 cm) |
| Displacement | 1,959 cu in (32,102 cu cm) |
| Emissions | U.S. EPA Tier 4 Final |
| Engine Model | Cat C32 with ACERT Technology |
| Gross Power - Sae J1995 | 1,039 hp (775 kw) |
| Net Power - Eec 80/1269 | 973 hp (726 kw) |
| Net Power - Iso 14396 | 1,024 hp (764 kw) |
| Net Power - Iso 9249 | 973 hp (726 kw) |
| Net Power - Sae J1349 | 964 hp (719 kw) |
| Note | Standard ambient cooling. |
| Peak Torque - 1,250 Rpm | 4,034 lbs ft (5,469 nm) |
| Rated Speed | 1,800 rpm |
| Stroke | 6 in (16 cm) |
| Torque Rise | 33% |
| General Specifications | |
| Bucket Capacity (Since 2016) | 16.0 - 31.0 |
| Bucket Capacity (Since 2017) | 16.0 - 31.0 (12.2 - 23.7) |
| Bucket Capacity (Since 2021) | 16 - 31 (12.2 - 23.7) |
| Engine Power (Since 2016) | 1,024 hp (764 kw) |
| Engine Power (Since 2017) | 1,024 (764) |
| Engine type (Since 2016) | Cat C32 ACERT |
| Engine type (Since 2020) | Cat C32 |
| Max Dump Height (Since 2016) | 9 ft (3 m) |
| Max Dump Height (Since 2017) | 8.5 (2.6) |
| Max Dump Height (Since 2019) | 15.3 (4.7) |
| Operating Weight (Since 2016) | 292,748 lbs (132,788 kg) |
| Operating Weight (Since 2017) | 292,748 (132,788) |
| Tip Load (Since 2021) | 183,563 (83,263) |
| Travel Speed (Since 2024) | 14.1 / 15.6 mph |
| Travel Speed(Fwd/Rev) (Since 2021) | 14.1 / 15.6 mph |
| Hydraulic Cycle Times | |
| Dump | 1.8 s |
| Lower | 3.8 s |
| Lower Float Down | 3.1 s |
| Note | High Lift configuration, calculated speeds. |
| Rack Back | 2.4 s |
| Raise | 9.2 s |
| Total Hydraulic Cycle Time | 17.2 s |
| Hydraulic System | |
| Dump Time | 2 sec |
| Lower Time | 7 sec |
| Pump Type | 3x fully variable E/H displacement control |
| Raise Time | 9 sec |
| Relief Valve Setting | 4,278 psi |
| Hydraulic System - Lift/Tilt | |
| Cylinders - Lift/Tilt | Double-acting |
| Lift Cylinder - Bore | 11 in (27 cm) |
| Lift Cylinder - Stroke | 66 in (168 cm) |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift/Tilt System - Pump | Variable Piston |
| Maximum Flow At 1,650 Rpm | 311 gpm (1,177 lpm) |
| Note | High Lift configuration. |
| Relief Valve Setting - Lift/Tilt | 4,200 psi |
| Tilt Cylinder - Bore | 9 in (24 cm) |
| Tilt Cylinder - Stroke | 41 in (104 cm) |
| Hydraulic System - Steering | |
| Maximum Flow At 1,985 Rpm (6900 Kpa/1,000 Psi) | 133 gpm (503 lpm) |
| Relief Valve Setting - Steering | 5,000 psi |
| Steering System - Circuit | Closed |
| Steering System - Pump | Piston, variable displacement |
| Total Steering Angle | 86 degrees |
| Operating Specifications | |
| Articulation Angle | 43 degrees |
| Bucket Range | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Cat Truck Match - High Lift | 777, 785 |
| Cat Truck Match - Standard Lift | 777 |
| Note | * High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912). |
| Operating Weight - Tier 2 Equivalent* | 294,687 lbs (133,668 kg) |
| Operating Weight - Tier 4 Final* | 294,687 lbs (133,668 kg) |
| Operating Weight* | 294,687 lbs (133,668 kg) |
| Rated Payload - High Lift | 60,627 lbs (27,500 kg) |
| Rated Payload - Standard Lift | 66,139 lbs (30,000 kg) |
| Operational | |
| Alternator Supplied Amperage | 150 amps |
| Cooling System Fluid Capacity | 84 gal (318 l) |
| Engine Oil Fluid Capacity | 32 gal (121 l) |
| Front Axle/Diff Fluid Capacity | 130 gal (492 l) |
| Fuel Capacity | 545 gal (2,063 l) |
| Hydraulic System Fluid Capacity | 49 gal (185 l) |
| Operating Voltage | 24 V |
| Operating Weight | 294,670 lbs (133,660 kg) |
| Rear Axle/Diff Fluid Capacity | 128 gal (484 l) |
| Static Tipping Weight | 186,378 lbs (84,540 kg) |
| Tire Size | 50 / 65R51 |
| Transmission Fluid Capacity | 45 gal (170 l) |
| Turning Radius | 36 ft (11 m) |
| Service Refill Capacities | |
| Cooling System | 80 gal (304 l) |
| Crankcase | 32 gal (120 l) |
| Differential - Final Drives - Front | 127 gal (482 l) |
| Differential - Final Drives - Rear | 127 gal (482 l) |
| Fuel Tank | 573 gal (2,170 l) |
| Hydraulic System - Tank Only | 146 gal (553 l) |
| Hydraulic System Factory Fill | 230 gal (871 l) |
| Note | High Lift configuration. |
| Transmission | 52 gal (197 l) |
| Sound | |
| Dynamic Operator Sound Pressure Level (Iso 6396:2008) | 70 dB(A) |
| Note (1) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment. |
| Note (2) | The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (3) | The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Operator Sound Pressure - Ansi/Sae J1166 Feb08 | 72 dB(A) |
| Transmission | |
| Direct Drive - Forward 1 | Lock-up disabled |
| Direct Drive - Forward 2 | 8 mph (13 kph) |
| Direct Drive - Forward 3 | 14 mph (23 kph) |
| Direct Drive - Reverse 1 | 5 mph (8 kph) |
| Direct Drive - Reverse 2 | 9 mph (14 kph) |
| Direct Drive - Reverse 3 | 16 mph (25 kph) |
| Forward - 1 | 4 mph (7 kph) |
| Forward - 2 | 7 mph (12 kph) |
| Forward - 3 | 13 mph (20 kph) |
| Max Speed - Forward | 14 mph (22 kph) |
| Max Speed - Reverse | 15 mph (24 kph) |
| Note | 50/65-51 BFOR (311-1938), calculated speeds. |
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Reverse - 1 | 5 mph (8 kph) |
| Reverse - 2 | 8 mph (13 kph) |
| Reverse - 3 | 14 mph (22 kph) |
| Transmission Type | Cat Planetary Power Shift |
| Transmission Type | Powershift |