Description:
???????????????? / ????????????????????: CME 75
????????????????: 1995
???????????????????????? ????????????????????????: 268957
???????????? ????????????????????: Approximately 7,000
???????????????? ????????????????????????: Cummins 6B Diesel
????????????????????????????: 1995 Ford FT900 Tandem Axle
???????????????????? ????????????????????????: Cummins 6-Cylinder Diesel
???????????????????? ????????????????????????????: Approximately 116,000 Miles
????????????????????????????????: Midwest U.S.
????????????????????????????????????: Used – Well Equipped
???????????????????????? ????????????????????: $65,000 USD
????????????????????????????????
This 1995 CME 75 is mounted on a tandem-axle 1995 Ford FT900 and is set up with a strong geotechnical drilling package.
The rig is powered by a Cummins 6B diesel with approximately 7,000 hours, while the truck is powered by a Cummins 6-cylinder diesel and shows approximately 116,000 miles.
This is a well-equipped CME 75 with a QD tower, rod clamp and breakout wrench, slide base, wiggle tail, SPT auto hammer, 3L8 Moyno pump, three rig-mounted winches, onboard water, and plenty of rod and auger storage.
????????????????????????????????????
- Cummins 6B diesel deck engine
- Approximately 7,000 rig hours
- QD tower
- Rod clamp
- Breakout wrench
- Hydraulic slide base
- Wiggle tail
- SPT automatic hammer
- Moyno 3L8 water pump
- 4-speed water-pump transmission
- Main winch
- Two tool winches
- Water tank
- 10' rod storage
- Under-deck auger storage on both sides
????????????????????
The rig is mounted on a 1995 Ford FT900 tandem-axle chassis.
Truck features include:
- Cummins 6-cylinder diesel engine
- Approximately 116,000 miles
- Tandem rear axle
- Heavy-duty front bumper
- Front hydraulic leveling jack
- Front recovery winch
???????????????????? ????????????????????????????
The rig is equipped with:
- Main winch
- Two tool winches
- Front truck-mounted recovery winch
???????????????????????????? & ???????????????????? ????????????????????
The truck is already laid out for field production with:
- 10-foot rod storage
- Under-deck auger storage on both sides
- Front-mounted water tank
- Front recovery winch
- Front leveling jack
It is a practical setup for a crew that needs to carry a meaningful amount of tooling and rod directly on the truck.
????????????????????????????????????????????????
- Geotechnical drilling
- Hollow-stem auger drilling
- SPT sampling
- Soil investigation
- Environmental drilling
- Monitoring well installation
- General rotary drilling
???????????? ???????????????? ???????????????????????????? ????????????????????????????????????
This rig is also a good candidate for optional shop work through Drill Rig Marketplace prior to delivery.
Depending on the buyer’s needs, DRM can quote a custom service or refurbishment package that can include:
- Full operational inspection
- Engine and hydraulic service
- Hydraulic hose replacement as needed
- Electrical troubleshooting and cleanup
- Winch inspection and adjustment
- Rod clamp / breakout inspection and repair
- Auto hammer service and adjustment
- Moyno pump service
- Leak repair
- Mechanical repairs as needed
- Pressure wash and degrease
- Sandblast and paint
- Buyer company colors and decals
- Final operational testing
- Service documentation showing completed work
The scope can be as simple as a service and inspection or as involved as a full cosmetic and mechanical refresh.
For a buyer who likes the setup but wants a cleaner, more dialed-in machine before delivery, DRM can handle that work as part of the transaction.
???????????????????????????? ???????????????????????????????? ????????????????????????????????????
Need tooling to go with the rig?
Drill Rig Marketplace can quote a complete tooling package based on your application, including hollow-stem augers, drill rod, casing, sampling tools, split spoons, bits, adapters, and other accessories as needed.
We can help put together the rig and tooling as a complete package so it is ready to go to work when it arrives.
???????????????????????????????? ????????????????
This is a nicely equipped CME 75.
You already have the QD tower, rod clamp and breakout, slide base, wiggle tail, auto hammer, 3L8 Moyno, three rig-mounted winches, front recovery winch, water tank, rod storage, and auger storage built into the package.
Add the tandem Ford FT900 chassis, Cummins power on both the rig and truck, and approximately 116,000 truck miles, and you have a solid, well-equipped geotechnical setup with the features that actually matter in the field.
At $65,000, this gives a contractor a lot of rig for the money without stepping into six-figure pricing.
Buy it as-is and put it into your own program, or let DRM run it through the shop and tailor the machine around what you want before delivery.
???????????????????????? ????????????????????: $65,000 USD
The CME-75 is a drilling rig in the CME drills lineup, designed for geotechnical, environmental, and foundation drilling applications. It is commonly used for soil sampling, monitoring well installation, and subsurface investigation work. The CME-75 is known for its compact footprint and truck- or track-mounted configurations, depending on setup. Typical drilling methods may include hollow stem auger, rotary wash, and mud rotary, with tooling selected for site conditions and project requirements. As a CME drill model, the CME-75 is associated with field versatility, mobility, and access to confined job sites.
