2019 Hitachi ZW120-6 For Sale in West Babylon, NY




For Sale: $119,000.00 USD


All Island Equipment

https://www.allislandequipment.com


Contact: Gary Wade

Click for Phone Number

Machine Info:

Hours:39
Serial Number:5269
Machine Location:WEST BABYLON NY, 11704

Description:

2 CU YD BUCKET/ JRB ISO COUPLER/ 17.5 R25 MICHELIN XTLA RADIALS/ SINGLE JOYSTICK LOADER CONTROL/
3RD SPOOL HYDRAULICS/ CAB HEAT AC/ CALL FOR PRICE


Specs from the manufacturer:

Axle and Final Drive
Drive SystemFour-wheel drive system
Final DrivesHeavy-duty planetary, mounted inboard
FrontFixed to the front frame
Front & rear axleSemi-floating
Oscillation angleTotal 20 degrees (+10, -10)
RearTrunnion support
Reduction and differential gearTwo stage reduction with torque proportional differential
Brakes
Parking BrakeSpring applied, hydraulically released, wet disc type
Service BrakesInboard mounted fully hydraulic 4 wheel wet disc brakes. Front & rear independent brake circuit, HST (Hydro Static Transmission) system provides additional hydraulic braking capacity
Engine
AftertreatmentDOC and SCR system
Air CleanerTwo element dry type with restriction indicator
AspirationTurbocharger and intercooled
Batteries2 x 12 V
Bore and Stroke3.9 in x 4.7 in (98 mm x 120 mm)
EmissionComplies with EU stage IV and US EPA Tier 4 Final
Maximum rated power ISO 14396, gross101 hp (74 kW) at 2,000 min (rpm)
Maximum rated power ISO 9249, net96 hp (71 kW) at 2,000 min (rpm)
Maximum Torgue400 NM at 1,600 min (rpm)
ModelDEUTZ TCD3.6L4F
No. of cylinders4
Piston Displacement221 in (561 cm)
Type4-cycle water-cooled, direct injection
Hydraulic System
Arm ControlsFour position valve; Raise, hold, lower, float Bucket controls with automatic bucket return to-dig control
FiltersFull-flow 10 micron return filter in reservoir
HST charging pumpGear type 10.4 gal/min (39.2 L/min) at 2,000 min (rpm) at 2.5 MPa (25 kgf/cm2)
Hydraulic cycle times - Bucket dump2 sec
Hydraulic cycle times - Lift arm lower3 sec
Hydraulic cycle times - Lift arm raise7 sec
Hydraulic cycle times - Total11 sec
Hydraulic cylinders - No. x Bore x StrokeArm: 2 x 4.1 in x 28.0 in (2 x 105 mm x 710 mm) Bucket: 1 x 4.9 in x 17.5 in (1 x 125 mm x 445 mm)
Hydraulic cylinders TypeDouble acting type
Main pump (Load & steer)Gear type 32.0 gal/min (121 L/min) at 2,000 min-1 (rpm) at 20.6 MPa (210 kgf/cm2)
Relief pressure setting20.6 MPa (210 kgf/cm2)
Transmission charging pumpGear type 5.9 gal/min (22 L/min) at 2,000 min (rpm) at 1.8 MPa (18 kgf/cm2
Power Train
Cooling MethodForced circulation type
TransmissionElectrical-controlled 1 motor hydrostatic transmission with gear box, Gear box: Fixed gear ratio, powershift countershaft type
Travel speed Forward/Reverse - 1st7 mph (11 kph)
Travel speed Forward/Reverse - 2nd35 mph (56 kph)
Steering System
CylindersDouble-acting piston type
No. x Bore x Stroke2 x 2.4 in x 15.6 in (2 x 60 mm x 395 mm)
Steering AngleEach direction 40 degrees; total 80 degrees
TypeArticulated frame steering

Dealer Contact Info:

All Island Equipment

Fax: 631-643-4060



Contact: Gary Wade

Click for Phone Number