List and Sell Your Equipment  /  Dealer Login  /  Create Account

1999 JCB JS200 For Sale in Raleigh, NC



For Sale: Call for Price




Gregory Poole CAT



Contact: McCrea Wallace

Click for Phone Number

Machine Info:

Hours:15638
Serial Number:SLPJS903XE0706028
Stock Number:EQ138979
Machine Location:RALEIGH, NC 27606

Description:

JS200

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
Extra Fuel TanksNo
S.O.S. TakenNo
BumperPoor - left and right side panels bent
Car BodyFair - bolt backing out on turn table
CounterweightPoor - worn / damaged but functional
Crankcase Guard / Battery BoxFair
DecalsPoor
Eng. Enclose Hood / StackPoor - Hood latches broken not functional, one fin broke on left side of hood
Engine DoorsPoor - no working door latches, left door damaged, right door hinge bracket bent / door damaged, insulation / foam falling off
Fuel TankGood
Grab IronsPoor - right side hand rail bent in, cab rail missing
Main Frame WeldsGood
PaintFair - fair for its age
Sheet MetalPoor - belly pans taken off, cab belly pan rusting, top cover missing on top
Steps / LadderFair - left front step bent up, right rear step bent back
SAFETY ITEMS
Cab GuardsYes - customer installed front screen / nuts welded to cab bolted on
ROPSNo - did not see a ROPS tag in cab / cab is dented in 2 places on right front post / nuts welded on front of cab for screen / plexie glass screwed into cab and door
Safety Decals In PlaceNo
Safety Decals LegibleNo
Notes - SAFETY ITEMS - **machine not physically safe to operate** see ROPS tab along with all other issues ** Hydraulic safety lever falls down on its on will not stay in locked position
HornPoor - horn appear to have been removed / wires cut
Swing BrakeFair - seems to function (wasn't really able to swing much in the tree's where machine was parked)
GAUGES, OPERATOR STATION, CONSOLE
Back Up AlarmNo
Current O&MMNo
Current Parts ManualNo
Current Safety ManualNo
Fuel Level - unknown
Notes - GAUGES, OPERATOR STATION, CONSOLE - see pictures
Air ConditionerPoor - a/c compressor belt missing / vents damaged 2 fans in cab not hooked up
Dash ConsolePoor - no electronics in cab work
Door LatchesPoor - door does not latch
EMS Panel / WarningsPoor - no electronics in cab work
Floor BoardsPoor - floor mat removed laying on the ground, floor rusty hole on right side possibly where pedal was installed
GaugesPoor - no electronics in cab work
Glass/MirrorsPoor - only OEM windows are the rear glass and the sliding door glass and room glass, all other has been replace with plexie glass and is silicone and screwed in. top glass is caulked, front glass missing hardware to keep glass in track (unable to close)
HeaterPoor - no electronics in cab work
Interior LightsPoor - no electronics in cab work
MeterFair - assuming meter is working it did have a green light blinking when machine was running
Seat BeltPoor
Seat Cushion / Arm RestPoor - see picture
SwitchesPoor - no electronics in cab work
Windshield WipersPoor - no electronics in cab work / no wiper arm on machine
ENGINE
Blow ByNo - didn't appear to have any oil dripping out of blow by tube
Fluid Levels OK?Yes - engine oil and coolant looked ok
KnockingNo - engine seemed ok sounded like hydraulic pump chattering (lack of hyd. oil)?
Oil LeaksYes - oil pan or filters leaking? whole bottom side of engine covered in oil
Water in OilNo
Anti-Freeze Color - Green
Oil Pressure (H/L/N) - unknown
Smoke (B/D/L/W) - normal
Belts / PulleysGood
Engine SupportsFair - seemed ok
Exhaust / MufflerGood
Fuel Injection SystemFair - seemed ok
Operating Condition - ENGINEFair - engine runs but has to be started with jumper wire to starter, throttle disconnected have to throttle up and shut down with wire to throttle controls
Turbocharger / BlowerFair - seemed ok
COOLING SYSTEM
LeaksNo - no coolant leaks identified
CoolersPoor - oil cooler leaking? coils covered in oil and debris
FanGood
HosesFair - coolant lines looked ok
RadiatorPoor - oil cooler leaking? coils covered in oil and debris
Water PumpFair - seems ok no signs of leaks and was not able to see engine temps due to no electrical working in cab
ELECTRICAL, STARTING AND CHARGING SYSTEM
Notes - ELECTRICAL, STARTING AND CHARGING SYSTEM - no electronics working in cab, key switch does not work, jumper wire ran to starter to jump at batteries, wires on top of engine cut off, wires at oil cooler leaking? coils covered in oil and debris solenoids have been altered, horn wires cut
AlternatorPoor - unknown
Batteries / CablesPoor - batteries are charged / one cable held on with vise grips
LightingPoor - no lights installed
Pre-HeaterPoor - unknown
StarterGood - starter works when jumped with wire
WiringPoor
HYDRAULICS
Swing Drive Oil Level - unknown (dip stick stuck)
Boom CylinderGood
Bucket CylinderPoor - rod appears to have been welded back on, steel line bent / leak at hose
Hose LinesPoor - all steel lines bent not secured (held on with ratchet strap), aux. lines hanging loose on stick, most hyrualic lines have wire showing (almost all rubber has came off)
Operating Condition - HYDRAULICSFair - boom up stalls unless you multifunction, pump seems to be making noise possibly due to lack of hydraulic oil
Pump DriveFair - pump seems to be making noise possibly due to lack of hydraulic oil
Pumps & ValvesFair - everything works / wiring has been altered / damaged at solenoids
Stick CylinderGood
Swing GearFair - seems to be ok wasn't able to spin much in the trees where machine was located
Swing MotorsFair - seems ok, dip stick stuck could not pull to check oil.
Travel MotorsFair - could only check in one speed, both work, left inside cover bent, fluid leak coming from behind cover on right side
BOOM
Boom ConditionFair - appears to have a weld that cracked at some point and repaired on left side stick end
Boom PinsFair - some wear
Pins & Bushings - BOOMFair - some wear
STICK
Pins & Bushings - STICKFair - worn
Stick ConditionsFair - thumb plate welded on inside of stick, misc. pieces welded on back of stick, end of stick damaged / bent in
Stick PinsFair - worn
BUCKET
Quick CouplerNo
Brand - ESCO
Bucket BottomGood
Bucket LinkageFair - some wear, top bucket pin missing retaining bolt
Bucket MountsGood
Bucket SidesGood
Teeth / AdaptersFair - inside teeth worn outer teen appear to be newer
UNDERCARRIAGE
Pins & Bushings Turned?No - worn out
Average Life Remaining - UNDERCARRIAGE - 0
Cannon - unknown condition (tracks are slack)
Notes - UNDERCARRIAGE - Needs complete undercarriage (bushings worn all the way to pins, almost all track shoes loose, idlers and sprockets may have a little life left, See pictures
Track Frame - LeftFair
Track Frame - RightFair
FINAL DRIVES
Notes - FINAL DRIVES - right side appears to have a leak on inside behind cover
HousingsGood
Planetaries / DiffGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Engine runs, hydraulics work, has wiring and electrical issues along with cab damage / alterations, ***Honest opinion would be Scrap***

Dealer Contact Info:

Gregory Poole CAT




Contact: McCrea Wallace

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo