2018 JLG 1255 For Sale in Canastota, NY

12,000lbs of 'consider it done.' This machine has the capacity and the outriggers to get your project completed in record time!,, Lift Performance:, Max lift capacity: 12,000 lbs., Max lift height (outriggers up): 55 ft., Max forward reach (outriggers up): 42 ft., Lift capacity at max height: 5,000 lbs., Lift capacity at max reach: 3,500 lbs., Load center: 2 ft., Drawbar pull: 25,400 lbs., Frame leveling: 10 degrees, Outriggers/stabilizers: yes, required for max-rated capacity at full height/reach, Dimensions:, Overall length: 20 ft. 1 in., Overall width: 8 ft. 5 in., Overall height: 8 ft. 4 in., Wheelbase: 11 ft. 6 in., Ground clearance: 1 ft. 6 in. (18 in.), Turning radius (outside): 14 ft., Tire size: 400/75-28, Weight:, Operating weight: 33,960 lbs., Engine:, Make/model: Cummins QSF3.8L, Tier 4 Final, Horsepower: 130 hp @ 1,500 rpm, Fuel capacity: 38.3 gal., Drivetrain/Transmission:, Transmission: 4-speed powershift (SmartShift auto-shifting on 3rd/4th gears), Forward gears: 4 / Reverse gears: 3, Front axle: high bias, limited slip, Rear axle: planetary, Steering: 2-wheel, 4-wheel, and crab modes, Hydraulics:, Function pump: load-sensing dual gear, Auxiliary hydraulic flow: 25 gpm, Cycle Times:, Lift: 16 sec. / Lower: 13 sec., Telescope out: 18 sec. / Telescope in: 15 sec., Cab/Controls:, Single joystick proportional control with integrated armrest, Carriage tilt, side-shift and side-tilt carriage options, OPEN CAB

The JLG 1255 is a telehandler designed for material handling, lifting, and placement on construction and industrial job sites. It is part of JLG's high-capacity telehandler lineup and is used to move palletized loads, building materials, and other heavy items to elevated or extended reach positions. The machine combines a telescopic boom with four-wheel drive and rough-terrain capability for use on uneven ground. Common applications include construction, masonry, framing, and general site logistics. The JLG 1255 is typically selected where lift height, forward reach, and load capacity are required in a single machine.