2015 JLG G10-55A For Sale in Canastota, NY

Outriggers down; heavy materials up!!,, Lift Performance:, Rated capacity (at 24 in. load center): 10,000 lbs., Max lift height: 55 ft. (one source lists 54 ft. 9 in.), Max forward reach: 42 ft. (one source lists 42 ft. 6 in.), Load at max height: 5,000 lbs., Load at max reach: 3,000 lbs., Drawbar pull (loaded): 20,000 lbs. on the brochure; 24,000 lbs. on a later sheet, Frame leveling: 10°, Cycle Times:, Lift: 14.6 sec. up / 15.8 sec. down, Telescope: 17.3 sec. out / 16.8 sec. in, Dimensions:, Overall length (less forks): 20 ft., Overall width: 8 ft. 4 in., Overall height (stowed): 8 ft. 4 in., Wheelbase: 12 ft., Ground clearance: 18 in., Outside turning radius: 14 ft., Weight:, Operating weight: 34,400 lbs. with a 48 in. carriage and forks (the JLG spec sheet shows 34,850 lbs.), Engine:, Make/model: Cummins QSB4.5, turbocharged and aftercooled, Cylinders: 4, Displacement: 276 cu. in., Gross power: 130 hp @ 2,400 rpm, Max torque: 457 lb-ft. @ 1,500 rpm, Fuel tank: 38 gal., Drivetrain:, Transmission: powershift with torque converter, 4-speed forward and 3-speed reverse, Top travel speed: 20 mph, Axles: trunnion-mounted planetary steer axles, with a high-bias limited-slip differential on the front, Steering: 2-wheel, 4-wheel, and crab modes, Brakes, Service: inboard wet disc on the front and rear axles, Parking: wet disc, spring-applied, hydraulic release on the front axle, Tires:, Standard: 400/75-28, Optional: foam-filled or solid, Electrical:, 12V system, 65 amp alternator, Other:, Hydraulic system capacity (with tank): about 57 gal., Single joystick control, Certified ROPS/FOPS structure, Outriggers (axle-mounted) required for maximum capacity at full height and reach

The JLG G10-55A is a telehandler designed for material handling, lifting, and placement on construction and industrial job sites. It features a maximum lift capacity of 10,000 lb and a maximum lift height of 55 ft, making it suitable for moving palletized loads, construction materials, and equipment at elevated heights. The machine is commonly used in building, masonry, and general site logistics applications. The G10-55A is part of JLG's telehandler lineup and is built for reach, stability, and load handling performance in demanding work environments.