| Cooling |
|
Cooling system type (Since 2026)
|
Two cool-on-demand hydraulic-driven, suction-type fans with remote-mounted drive |
| Cylinders |
|
Arm cylinder bore (in.) (Since 2026)
|
8 in (20 cm)
|
|
Arm cylinder rod diameter (in.) (Since 2026)
|
6 in (14 cm)
|
|
Arm cylinder stroke (in.) (Since 2026)
|
85 in (216 cm)
|
|
Boom cylinder bore (in.) (Since 2026)
|
8 in (19 cm)
|
|
Boom cylinder rod diameter (in.) (Since 2026)
|
5 in (13 cm)
|
|
Boom cylinder stroke (in.) (Since 2026)
|
71 in (180 cm)
|
|
Bucket cylinder bore (in.) (Since 2026)
|
7 in (18 cm)
|
|
Bucket cylinder rod diameter (in.) (Since 2026)
|
5 in (13 cm)
|
|
Bucket cylinder stroke (in.) (Since 2026)
|
61 in (155 cm)
|
|
Cylinders type (Since 2026)
|
Heat-treated, chrome-plated, polished cylinder rods; hardened steel (replaceable bushings) pivot pins |
|
Number of arm cylinders (Since 2026)
|
1 |
|
Number of boom cylinders (Since 2026)
|
2 |
|
Number of bucket cylinders (Since 2026)
|
1 |
| Electrical |
|
Alternator rating (amp) (Since 2026)
|
50 amp |
|
Battery capacity (CCA) (Since 2026)
|
500.0 CCA |
|
Battery voltage (V) (Since 2026)
|
12 v |
|
Number of batteries (Since 2026)
|
2 |
|
Work lights (Since 2026)
|
Five halogen (one mounted on frame, two mounted on boom, and two mounted on top of cab) |
| Engine |
|
Aspiration type (Since 2026)
|
Turbocharged, air-to-air charge-air cooler |
|
Cylinders (Since 2026)
|
6 |
|
Displacement (cu in.) (Since 2026)
|
957 cu in (15,682 cu cm)
|
|
Manufacturer (Since 2026)
|
Isuzu |
|
Net power (rpm) (Since 2026)
|
1,800 rpm |
|
Net power at net power rpm (ISO 9249) (hp) (Since 2026)
|
463 hp (345 kw)
|
|
Non-road emission standards (Since 2026)
|
EPA Final Tier 4/EU Stage IV |
|
Off-level capacity (%) (Since 2026)
|
70.0 % |
|
Off-level capacity (degrees) (Since 2026)
|
35 degrees |
| General Specifications |
|
Digging Depth (Since 2025)
|
23.3–30.0 |
|
Digging Reach (Since 2025)
|
45 ft (14 m)
|
|
Engine (Since 2025)
|
463 hp (345 kw)
|
|
Operating Weight (Since 2025)
|
154,103 lbs (69,900 kg)
|
| Ground Pressure |
|
36-in. double bar grouser shoes (psi) (Since 2026)
|
11 psi |
| Hydraulics |
|
Controls type (Since 2026)
|
Pilot levers, short stroke, low-effort hydraulic pilot controls with shutoff lever |
|
Hydraulics type (Since 2026)
|
Open center, load sensing; in-cab mode selectors, illuminated: power modes (3), travel modes (2), and work modes (2) |
|
Implement circuits system operating pressure (psi) (Since 2026)
|
4,627 psi |
|
Main pump maximum rated flow per pump (gpm) (Since 2026)
|
129 gpm (488 lpm)
|
|
Main pump type (Since 2026)
|
Two variable-displacement pumps |
|
Number of pumps (Since 2026)
|
2 |
|
Pilot pump maximum rated flow (gpm) (Since 2026)
|
8 gpm (30 lpm)
|
|
Pilot pump number of gears (Since 2026)
|
1 |
|
Pilot pump pressure setting (psi) (Since 2026)
|
566 psi |
|
Power boost system operating pressure (psi) (Since 2026)
|
4,975 psi |
|
Pump 2 maximum rated flow per pump (gpm) (Since 2026)
|
129 gpm (488 lpm)
|
|
Swing circuits system operating pressure (psi) (Since 2026)
|
4,264 psi |
|
Travel circuits system operating pressure (psi) (Since 2026)
|
4,975 psi |
| Operating weights of excavator with standard counterweight and boom |
|
Conditions for measuring operating weights (Since 2026)
|
With full fuel tank; 79-kg (175 lb) operator; 3.09-m3 (4.04 cu yd), 1370-mm (54 in.), 3126-kg (6,892 lb) bucket; 4.2-m (13 ft 9 in.) arm; 9800-kg (21,605 lb) counterweight; counterweight-removal device; and 900-mm (36 in.) double-bar grouser shoes |
|
With 36-in. double-bar grouser shoes (lb) (Since 2026)
|
154,103 lbs (69,900 kg)
|
| Operating weights of optional components with standard counterweight and boom |
|
1-piece boom, with arm cylinder (lb) (Since 2026)
|
14,462 lbs (6,560 kg)
|
|
1-piece boom, with arm cylinder and mass-excavating arm (lb) (Since 2026)
|
13,514 lbs (6,130 kg)
|
|
11-ft, 10-in. arm with bucket and linkage (lb) (Since 2026)
|
8,025 lbs (3,640 kg)
|
|
13-ft, 9-in. arm with bucket and linkage (lb) (Since 2026)
|
8,466 lbs (3,840 kg)
|
|
9-ft, 6-in. arm with bucket and linkage and mass-excavating arm (lb) (Since 2026)
|
8,190 lbs (3,715 kg)
|
|
Boom-lift cylinders (2), total weight (lb) (Since 2026)
|
2,502 lbs (1,135 kg)
|
|
Undercarriage with 36-in. double-bar grouser shoes (lb) (Since 2026)
|
62,508 lbs (28,353 kg)
|
| Powertrain |
|
Drawbar pull (lb) (Since 2026)
|
101,666 lbs (46,115 kg)
|
|
Maximum travel speed high/fast (mph) (Since 2026)
|
3 mph (5 kph)
|
|
Maximum travel speed low/slow (mph) (Since 2026)
|
2 mph (4 kph)
|
|
Powertrain type (Since 2026)
|
2-speed propel with AutoShift |
| Refill Capacities |
|
Cooling system (qt) (Since 2026)
|
80 qt |
|
Diesel-exhaust fluid (DEF) (qt) (Since 2026)
|
100 qt |
|
Engine oil with filter (qt) (Since 2026)
|
60 qt |
|
Fuel tank (gal.) (Since 2026)
|
238 gal (901 l)
|
|
Hydraulic system (gal.) (Since 2026)
|
198 gal (750 l)
|
|
Hydraulic tank (gal.) (Since 2026)
|
100 gal (380 l)
|
|
Pump drive gearbox (qt) (Since 2026)
|
7 qt |
|
Swing gearbox (qt) (Since 2026)
|
11 qt |
|
Travel gearbox (gal.) (Since 2026)
|
4 gal (16 l)
|
| Swing Mechanism |
|
Speed (rpm) (Since 2026)
|
9 rpm |
|
Torque (lb-ft) (Since 2026)
|
151,938 lbs ft (205,998 nm)
|
| Undercarriage |
|
Number of carrier rollers per side (Since 2026)
|
3 |
|
Number of shoes per side (Since 2026)
|
47 |
|
Number of track rollers per side (Since 2026)
|
8 |
|
Track adjustment type (Since 2026)
|
Hydraulic |
|
Track chain type (Since 2026)
|
Sealed and lubricated |
|
Track guides (Since 2026)
|
Front and center |
