Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-10-13
| Hours: | 814 |
| Serial Number: | 1TC930MCJDT013924 |
| Machine Location: | BIRMINGHAM, AL |
Supplied by HeavyEquipmentData.com →
| Additional Information | |
| Date Collected (Since 2026) | 2026-08-03T00:00:00 |
| Blades | |
| Blade Tip Speed (Since 2026) | 7Iron™ PRO: Approximately 18,500 fpm; 60-in. (152-cm) FastBack™: Approximately 16,500 fpm |
| Length (Since 2026) | Varies by deck size |
| Number (Since 2026) | 3 |
| Thickness (Since 2026) | 7Iron™ PRO: 0.25 in. (6.4 mm); FastBack™ PRO: 0.31 in. (8 mm) |
| Brakes | |
| Dynamic Braking (Since 2026) | Twin levers |
| Park Brake (Since 2026) | Internal wet disk integrated in the transmission |
| Park Brake Actuation (Since 2026) | Hand brake |
| Buyer's note | |
| Warranty (Since 2026) | 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation |
| Dimensions | |
| Height - With ROPS Down (Since 2026) | 47 in (119 cm) |
| Height - With ROPS Up (Since 2026) | 73 in (185 cm) |
| Length (Since 2026) | 84 in. (213 cm) |
| Weight (Since 2026) | 1299 - 1369 lb. |
| Width - Rear Discharge (Since 2026) | 64 in (161 cm) |
| Width - With Chute Down (Since 2026) | 68, 74 in. |
| Drivetrain | |
| Filter (Since 2026) | Internal, replaceable |
| Forward Speed (Since 2026) | 0-12 mph |
| Hydraulic Capacity (Since 2026) | 6 qt |
| Reverse Speed (Since 2026) | 0-4.5 mph |
| Speed Direction And Control (Since 2026) | Twin levers |
| Speed Range (Since 2026) | 0-12 mph |
| Transmission (Since 2026) | Hydrostatic |
| Travel Speed (Since 2026) | 10 mph (16 kph) |
| Wheel Motors (Since 2026) | Tuff Torq heavy-duty integrated piston wheel motor with cross porting |
| Electrical System | |
| Battery Voltage (Since 2026) | 12 v |
| Charge System (Since 2026) | 30 amp |
| Cold Cranking Amp (Since 2026) | 300 amp |
| Hour Meter (Since 2026) | Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics |
| Operator Presence Starting System (Since 2026) | Brake-N-Go (hand) |
| Engine | |
| Air Cleaner (Since 2026) | Heavy-duty canister type with safety element |
| Cooling (Since 2026) | Forced air, with integrated clean out ports and oil cooler |
| Crankcase Capacity (Since 2026) | 2 qt |
| Cylinders (Since 2026) | 2 |
| Displacement (Since 2026) | 52 cu in (852 cu cm) |
| Engine Manufacturer/Model (Since 2026) | FX801V |
| Engine Power (Since 2026) | Gross at 3,600 rpm: 25.5 hp (19 kW) |
| Lubrication (Since 2026) | Full pressure |
| Oil Filter (Since 2026) | Full flow, replaceable |
| Pre-Cleaner (Since 2026) | Yes |
| Fuel System | |
| Fuel Consumption (Since 2026) | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr) |
| Fuel Tank Capacity (Since 2026) | 12 gal (44 l) |
| Fuel Tank Switch/Shut-Off Valve (Since 2026) | No |
| Fuel Type (Since 2026) | Gasoline |
| Key Specs | |
| Blade Tip Speed (Since 2026) | 7Iron™ PRO: Approximately 18,500 fpm; 60-in. (152-cm) FastBack™: Approximately 16,500 fpm |
| Caster Wheels (Since 2026) | 13x6.5-6 |
| Drive Wheels (Since 2026) | 24x12-12 |
| Engine Manufacturer/Model (Since 2026) | FX801V |
| Engine Power (Since 2026) | Gross at 3,600 rpm: 25.5 hp (19 kW) |
| Fuel Tank Capacity (Since 2026) | 12 gal (44 l) |
| Mower Deck Size (Since 2026) | 54-in. (137-cm) 7Iron™ PRO side-discharge; 60-in. (152-cm) 7Iron™ PRO side-discharge; 60-in. (152-cm) FastBack™ PRO rear-discharge |
| Speed Range (Since 2026) | 0-12 mph |
| Transmission (Since 2026) | Hydrostatic |
| Warranty (Since 2026) | 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation |
| Mower Decks | |
| Cutting Width (Since 2026) | 54/60 in. |
| Deck Construction (Since 2026) | 7Iron™ PRO: 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel; FastBack™ PRO: 7-gauge, 0.179-in. (4.6-mm) fabricated steel |
| Discharge (Since 2026) | Side-discharge, Mulch On Demand™, Rear-discharge |
| Height-Of-Cut Increments (Since 2026) | 0 in (1 cm) |
| Height-Of-Cut Range (Since 2026) | 1-5.5 in. |
| Mower Deck Size (Since 2026) | 54-in. (137-cm) 7Iron™ PRO side-discharge; 60-in. (152-cm) 7Iron™ PRO side-discharge; 60-in. (152-cm) FastBack™ PRO rear-discharge |
| Operation | |
| Rollover Protective Structure (ROPS) (Since 2026) | Yes |
| Slope Operating Limit (Since 2026) | 20.0 degree (angle) |
| Slope Operating Limit - With Material Collection System (Since 2026) | 10.0 degree (angle) |
| PTO | |
| Drive (Since 2026) | V-belt |
| Type (Since 2026) | Electro-magnetic, 225 lb-ft (305 Nm) |
| Tires | |
| Drive Wheels (Since 2026) | 24x12-12 |
| Load Rating (Since 2026) | 4 PR |
| Wheels | |
| Caster Wheel Type (Since 2026) | Flat free |
| Caster Wheels (Since 2026) | 13x6.5-6 |
| Front Anti-Scalp Rollers (Since 2026) | Left, center, right |
| Rear Anti-Scalp Rollers (Since 2026) | 7Iron™ PRO: Left, center, right; FastBack™ PRO: Left, right |