| Cooling |
|
Engine cooling (Since 2026)
|
Coolant mixture is air cooled with two single pass radiators and has a remote pressurized coolant tank. A separate charge air cooler is used for the air system |
| Dump body |
|
Capacity heaped at 2:1 ISO 6483 ratio (cu yd) (Since 2026)
|
32.9 cu yd |
|
Capacity heaped at 2:1 ISO 6483 ratio with optional tailgate (cu yd) (Since 2026)
|
35.4 cu yd |
|
Heater type (Since 2026)
|
Body Ducted to accept optional exhaust heating |
|
Maximum dump angle (degrees) (Since 2026)
|
70 degrees |
|
Struck capacity (cu yd) (Since 2026)
|
25.5 cu yd |
|
Type (Since 2026)
|
High Strength Steel Dump Body |
| Electrical |
|
Alternator standard rating (amp) (Since 2026)
|
145 amp |
|
Alternator voltage (V) (Since 2026)
|
28 v |
|
Battery capacity (CCA) (Since 2026)
|
1400.0 CCA |
|
Number of batteries (Since 2026)
|
2 |
|
Voltage (V) (Since 2026)
|
24 v |
|
Voltage per battery (V) (Since 2026)
|
12 v |
| Engine |
|
Aspiration (Since 2026)
|
Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR) |
|
Cold-start aid option and description (Since 2026)
|
Optional Ether Start, Optional Block Heater, Optional Diesel Fired Coolant Heater |
|
Displacement (cu in.) (Since 2026)
|
830 cu in (13,601 cu cm)
|
|
Fuel system (Since 2026)
|
Electronically controlled high-pressure common-rail (HPCR) with 10 and 4-micron filtration and water separator |
|
Manufacturer (Since 2026)
|
John Deere |
|
Net peak torque (ISO 9249) at rated rpm (lb-ft) (Since 2026)
|
1,887 lbs ft (2,558 nm)
|
|
Net peak torque rpm rating (rpm) (Since 2026)
|
1,300 rpm |
|
Net power (ISO 9249) at rated rpm (hp) (Since 2026)
|
497 hp (371 kw)
|
|
Net power rpm rating (rpm) (Since 2026)
|
1,700 rpm |
|
Non-road emission standards (Since 2026)
|
Final Tier 4/Stage 4 Certified |
|
Valves per cylinder (Since 2026)
|
4 |
| General Specifications |
|
Articulated/Rigid (Since 2023)
|
A |
|
Articulated/Rigid (Since 2024)
|
Articulated |
|
Articulated/Rigid (2025)
|
Articulated |
|
Drive Configuration (Since 2023)
|
6x6 |
|
Drive Configuration (2024)
|
6x6 |
|
Drive Configuration (Since 2025)
|
8-speed forward, 4-speed reverse, countershaft/planetary type with integral retarder and torque-proportioning differential |
|
Drive System Mech/Electr. (Since 2023)
|
M |
|
Drive System Mech/Electr. (2024)
|
M |
|
Drive System Mech/Electr. (Since 2025)
|
Mechanical |
|
Engine Type (Since 2023)
|
John Deere PowerTech 6135 FT4 engine |
|
Engine Type (2024)
|
John Deere PowerTech 6135 FT4 engine |
|
Engine Type (Since 2025)
|
John Deere JD14 |
|
Mfg. Model (Since 2023)
|
460 P-Tier |
|
Mfg. Model (2024)
|
460 P-Tier |
|
Operating Weight (Since 2023)
|
69,886 lbs (31,700 kg)
|
|
Operating Weight (2024)
|
69,886 lbs (31,700 kg)
|
|
Operating Weight (Since 2025)
|
69,390 lb. empty / 161,588 lb. loaded |
|
Rated Payload (Since 2023)
|
46 t (46,100 kg)
|
|
Rated Payload (2024)
|
46 t (46,100 kg)
|
|
Rated Payload (Since 2025)
|
92,197 lb. |
| Hydraulics |
|
Cycle time power down (sec.) (Since 2026)
|
7 s |
|
Cycle time raise time (sec.) (Since 2026)
|
12 s |
|
Dump cylinder hydraulics type (Since 2026)
|
Dual Acting, single-stage with heat-treated, chrome-plated and polished cylinder rods, hardened steel replaceable bushings and pivot pins |
|
Hydraulics type (Since 2026)
|
Closed center, Variable Displacement, Load-sensing system |
|
Main Pump (Since 2026)
|
Variable displacement, Axial Piston |
|
Secondary steering pump type (Since 2026)
|
Ground Driven Gear Pump with Hydraulic Unloader Valve |
| Operating Dimensions |
|
Turning circle radius, inside (ft, in.) (Since 2026)
|
15.2 ft, in. |
|
Turning circle radius, outside (ft, in.) (Since 2026)
|
29.2 ft, in. |
| Operating Weights |
|
875/65R29 tires (lb) (Since 2026)
|
2,835 lbs (1,286 kg)
|
|
Front, empty, with standard equipment (lb) (Since 2026)
|
36,475 lbs (16,545 kg)
|
|
Front, loaded, with standard equipment (lb) (Since 2026)
|
51,445 lbs (23,335 kg)
|
|
Middle, empty, with standard equipment (lb) (Since 2026)
|
16,457 lbs (7,465 kg)
|
|
Middle, loaded, with standard equipment (lb) (Since 2026)
|
55,071 lbs (24,980 kg)
|
|
Rated payload, empty, with standard equipment (lb) (Since 2026)
|
92,197 lbs (41,820 kg)
|
|
Rear, empty, with standard equipment (lb) (Since 2026)
|
16,457 lbs (7,465 kg)
|
|
Rear, loaded, with standard equipment (lb) (Since 2026)
|
55,071 lbs (24,980 kg)
|
|
Steel dump-body liner (lb) (Since 2026)
|
3,062 lbs (1,389 kg)
|
|
Tailgate (lb) (Since 2026)
|
2,112 lbs (958 kg)
|
|
Total, empty, with standard equipment (lb) (Since 2026)
|
69,390 lbs (31,475 kg)
|
|
Total, loaded, with standard equipment (lb) (Since 2026)
|
161,588 lbs (73,295 kg)
|
| Powertrain |
|
Auxiliary brake type (Since 2026)
|
Fully automatic; transmission-mounted gear-dependent; hydrodynamic retarder with selectable levels |
|
Axles differential (Since 2026)
|
Helical transfer gears, spiral bevel, hydraulically actuated PowerShift Cross-axle Differential Lock (CDL) |
|
Differential type (Since 2026)
|
Torque proportioning, planetary-type, Inter-axle Differential Lock (IDL) with PowerShift™ lock-up clutch |
|
Final drive type (Since 2026)
|
Extreme-duty outboard-mounted planetary; cooled and filtered oil |
|
Gear 1 forward speed (mph) (Since 2026)
|
4 mph (6 kph)
|
|
Gear 1 reverse speed (mph) (Since 2026)
|
4 mph (6 kph)
|
|
Gear 2 forward speed (mph) (Since 2026)
|
5 mph (8 kph)
|
|
Gear 2 reverse speed (mph) (Since 2026)
|
5 mph (8 kph)
|
|
Gear 3 forward speed (mph) (Since 2026)
|
7 mph (11 kph)
|
|
Gear 3 reverse speed (mph) (Since 2026)
|
7 mph (11 kph)
|
|
Gear 4 forward speed (mph) (Since 2026)
|
10 mph (16 kph)
|
|
Gear 4 reverse speed (mph) (Since 2026)
|
10 mph (16 kph)
|
|
Gear 5 forward speed (mph) (Since 2026)
|
14 mph (23 kph)
|
|
Gear 6 forward speed (mph) (Since 2026)
|
20 mph (32 kph)
|
|
Gear 7 forward speed (mph) (Since 2026)
|
28 mph (45 kph)
|
|
Gear 8 forward speed (mph) (Since 2026)
|
34 mph (55 kph)
|
|
Output torque front (%) (Since 2026)
|
32.0 % |
|
Output torque rear (%) (Since 2026)
|
68.0 % |
|
Parking brake type (Since 2026)
|
Spring-Applied Hydraulically-Released, driveline-mounted, dry-disk with a self-adjusting for pad wear |
|
Retarder type (Since 2026)
|
Integral, gear dependent, hydrodynamic, oil-to-air cooled, variable, fully automatic |
|
Service brake type (Since 2026)
|
Dual-circuit, hydraulically actuated, wet multi-disk, force cooled, inboard mounted |
|
Shift controls (Since 2026)
|
Fully automatic, electronically modulated PowerShift™, load-speed adaptive with gear skip and gear hunting protection |
|
Transmission Operator Interface (Since 2026)
|
Push-button FNR, selectable speed and gear range limits, selectable retarder aggressiveness, downhill decent control, gear-hold, and drive-modes |
|
Transmission type (Since 2026)
|
8-speed forward, 4-speed reverse, countershaft/planetary-type with integral retarder and torque proportioning differential |
| Serviceability |
|
Diesel-exhaust fluid (DEF) tank (gal.) (Since 2026)
|
13 gal (48 l)
|
|
Diesel-exhaust fluid (DEF) tank (L) (Since 2026)
|
48.0 L |
|
Engine coolant (gal.) (Since 2026)
|
24 gal (90 l)
|
|
Engine oil capacity with filter (qt) (Since 2026)
|
64 qt |
|
Front axle fluid, standard capacity (gal.) (Since 2026)
|
16 gal (62 l)
|
|
Fuel tank (gal.) (Since 2026)
|
161 gal (609 l)
|
|
Fuel tank (L) (Since 2026)
|
609.0 L |
|
Ground-level service coolers (Since 2026)
|
Swing out coolers for easy cleaning; Optional reversing fans |
|
Ground-level service fluid and filters (Since 2026)
|
Ground level engine, transmission and axle oil level check and filter replacement. Ground level fueling, and fuel filter replacement |
|
Ground-level service fluid sampling (Since 2026)
|
Standard fluid sampling ports; Optional quick service ports |
|
Hydraulic reservoir (gal.) (Since 2026)
|
47 gal (176 l)
|
|
Mid axle fluid, standard capacity (gal.) (Since 2026)
|
16 gal (62 l)
|
|
Rear axle fluid, standard capacity (gal.) (Since 2026)
|
18 gal (68 l)
|
|
Transmission fluid (gal.) (Since 2026)
|
16 gal (60 l)
|
| Steering System |
|
Angle, side to side (degrees) (Since 2026)
|
45 degrees |
|
Lock-to-lock turns (rotations) (Since 2026)
|
4 |
|
Type (Since 2026)
|
Two hydrostatically actuated, double-acting hydraulic cylinders; ground-driven secondary steering pump |
| Suspension |
|
Front (Since 2026)
|
Semi-independent leading A-frame geometry with a transverse link for lateral restraint and self-leveling oil filled struts with integrated nitrogen charged accumulators |
|
Rear (Since 2026)
|
Load-equalizing, pivoting walking beams with laminated suspension blocks, tri-link geometry and transverse links for lateral restraint |
| Tires and Wheels |
|
Optional size (Since 2026)
|
875/65R29 |
|
Optional type (Since 2026)
|
Radial earthmovers |
|
Standard size (Since 2026)
|
29.5R25 |
|
Standard type (Since 2026)
|
Radial earthmovers |
