| Additional Information |
|
Country of Manufacture (Since 2026)
|
Pune, India |
|
Date Collected (Since 2026)
|
9-Oct-2019 |
| Capacities |
|
Fuel Tank Capacity (Since 2026)
|
44 gal (168 l)
|
| Drawbar |
|
Drawbar Category (Since 2026)
|
Standard: Category 2; Optional: Category 2 heavy duty |
|
Maximum Vertical Load (Since 2026)
|
Standard: Category 2, 1000-1250 kg (2205-2756 lb); Optional: Category 2 heavy duty, 1200-1900 kg (2645-4189 lb); Maximum vertical load is dependent on drawbar position. |
| Electrical System |
|
Alternator Capacity (Since 2026)
|
90 amp |
| Engine |
|
Aftertreatment Type (Since 2026)
|
Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR) |
|
Alternative Fuel Type (Since 2026)
|
B20 diesel compatible |
|
Aspiration (Since 2026)
|
Turbocharged, wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation |
|
Cylinder Liners (Since 2026)
|
Wet-sleeved |
|
Emissions Certifications (Since 2026)
|
Final Tier 4 |
|
Engine Make (Since 2026)
|
John Deere |
|
Fuel Type (Since 2026)
|
Diesel |
|
Maximum Engine Power (Since 2026)
|
124 hp (92 kw)
|
|
Maximum Engine Power (Since 2026)
|
125 PS |
|
Maximum Engine Torque (Since 2026)
|
432 Nm (318 lb-ft) |
|
Rated Engine Power (Since 2026)
|
120 hp (89 kw)
|
|
Rated Engine Power (Since 2026)
|
121 PS |
| Front Axle |
|
Front Axle Differential Lock (Since 2026)
|
MFWD: Limited slip; 2WD: None |
|
Front Axle Type (Since 2026)
|
Standard: Mechanical front-wheel drive (MFWD); Optional: Two-wheel drive (2WD) |
| Hydraulics |
|
Available Flow at a Single Rear SCV (Since 2026)
|
75.7 L/min (20 gpm) |
|
Hydraulic System Type (Since 2026)
|
Open-center; Gear driven |
|
Pump Rated Output (Since 2026)
|
36.5 cc pump: 75.7 L/min (20 gpm) |
|
SCV Control (Since 2026)
|
Mechanical |
| Key Specs |
|
Engine Make (Since 2026)
|
John Deere |
|
Maximum Engine Power (Since 2026)
|
125 PS |
|
Maximum Engine Power (Since 2026)
|
124 hp (92 kw)
|
|
Pump Rated Output (Since 2026)
|
36.5 cc pump: 75.7 L/min (20 gpm) |
|
Rated Engine Power (Since 2026)
|
120 hp (89 kw)
|
|
Rated Engine Power (Since 2026)
|
121 PS |
|
Rear Hitch Category (SAE Designation) (Since 2026)
|
Standard: Category 2 standard lift; Optional: Category 2 heavy-duty lift |
|
Transmission Type (Since 2026)
|
Standard: John Deere 12F/12R PowrReverser™; Optional: John Deere 12F/12R PowrReverser transmission with creeper or John Deere 24F/12R PowrReverser transmission |
| Machine Configuration |
|
Drive Type (Since 2026)
|
Mechanical front-wheel drive (MFWD) or two-wheel drive (2WD) |
|
Wheel or Track Configuration (Since 2026)
|
Wheel |
| Operator Station |
|
Instructional Seat (Since 2026)
|
Optional |
|
Primary Display (Since 2026)
|
LCD instrument cluster |
|
Seat Suspension (Since 2026)
|
Standard: Mechanical suspension; Optional: Air suspension |
| Rear Axle |
|
Final Drive (Since 2026)
|
Inboard Planetary |
|
Rear Axle Type (Since 2026)
|
Flange |
|
Rear Differential Lock (Since 2026)
|
Full-locking mechanical |
| Rear Hitch |
|
Rear Hitch Category (SAE Designation) (Since 2026)
|
Standard: Category 2 standard lift; Optional: Category 2 heavy-duty lift |
|
Sensing Type (Since 2026)
|
Optional |
| Rear Power Take-Off (PTO) |
|
PTO Category (Since 2026)
|
Independent; Standard: 35 mm (1.375 in.) 540 rpm/1000 rpm reversible shaft |
| Steering & Brakes |
|
Steering Type (Since 2026)
|
Hydrostatic power |
| Tires |
|
Wheel Tread Range (Since 2026)
|
2WD: 1533–2043 mm (60.4–80.4 in); MFWD: 1516–2016 mm (59.7–79.4 in) |
| Transmission |
|
Creeper (Since 2026)
|
Optional |
|
Maximum Speed Forward (Since 2026)
|
12F/12R PowrReverser™ transmission: 30 km/h (19 mph); 24F/12R PowrReverser transmission: 40 km/h (25 mph) |
|
Transmission Type (Since 2026)
|
Standard: John Deere 12F/12R PowrReverser™; Optional: John Deere 12F/12R PowrReverser transmission with creeper or John Deere 24F/12R PowrReverser transmission |
