Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $204,236.00 USD
Converted From: 285,900.00 CAD
| Serial Number: | 1RW7290STMD120820 |
| Stock Number: | 1AU20820 |
| Machine Location: | PONOKA, AB |
Supplied by HeavyEquipmentData.com →
| Additional Information | |
| Country of Manufacture (Since 2026) | USA |
| Date Collected (Since 2026) | 4/3/2025 12:00:00 AM |
| Capacities | |
| Cooling System Capacity (Since 2026) | 12 gal (45 l) |
| Crankcase Oil Volume (Since 2026) | 6 gal (23 l) |
| Diesel Exhaust Fluid (DEF) Tank Capacity (Since 2026) | 7 gal (26 l) |
| Fuel Tank Capacity (Since 2026) | 122 (e23™), 135 (IVT™) gal. |
| Transmission - Hydraulic System (Since 2026) | 42 gal (160 l) |
| Dimensions & Weights | |
| Base Machine Weight (Since 2026) | 25,133 lbs (11,400 kg) |
| Drawbar Ground Clearance (Since 2026) | 18 in (46 cm) |
| Front Axle Ground Clearance (Since 2026) | 26 in (67 cm) |
| Maximum Ballast Level (Since 2026) | 145 lbs (66 kg) |
| Maximum Permissible Weight (Since 2026) | 39,683 lbs (18,000 kg) |
| Overall Height (Since 2026) | 138 in (350 cm) |
| Overall Length (Since 2026) | 233 in (591 cm) |
| Wheelbase (Since 2026) | 115 in (293 cm) |
| Drawbar | |
| Drawbar Category (Since 2026) | Category 3; Optional: Category 3 with heavy-duty support; Category 4 |
| Maximum Vertical Load (Since 2026) | Standard: Category 3: 1,837 kg (4,050 lb); Optional: Category 3 with heavy-duty support: 4,536 kg (10,000 lb) |
| Electrical System | |
| Alternator Capacity (Since 2026) | Standard: 210 amp, Optional: 250 amp |
| Battery Capacity (Since 2026) | 2 x 950 CCA |
| Battery Cold Cranking Amps (Since 2026) | 1900 CCA |
| Battery Voltage (Since 2026) | 12 v |
| Driving Lights (Since 2026) | Standard: 65-W halogen; Available: LED |
| Working Lights (Since 2026) | Standard: 18 halogen; Available: 18 light-emitting diode (LED) and two halogen or 22 LED and two halogen |
| Engine | |
| Aftertreatment Type (Since 2026) | Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF) |
| Aspiration (Since 2026) | Single turbocharger, variable geometry turbo |
| Cylinder Liners (Since 2026) | Wet-sleeve cylinder liners |
| Displacement (Since 2026) | 549 cu in (8,997 cu cm) |
| Displacement (Since 2026) | 9.0 L |
| Emissions Certifications (Since 2026) | Final Tier 4 |
| Engine Family (Since 2026) | MJDXL09.0319 |
| Engine Make (Since 2026) | John Deere |
| Engine Torque at Rated Speed (Since 2026) | 1,002 lbs ft (1,359 nm) |
| Fuel Type (Since 2026) | Diesel |
| Intelligent Power Management (IPM) (Since 2026) | Power boost: 29.6 hp / 22.1 kW / 30 PS (hp ISO) |
| Maximum Engine Power (Since 2026) | 315 hp: (hp SAE) |
| Maximum Engine Power (Since 2026) | 319 PS: (hp ISO) |
| Maximum Engine Torque (Since 2026) | At 1600 rpm: 1358 Nm (1002 lb-ft) |
| Number of Cylinders (Since 2026) | 6 |
| Rated Engine Power (Since 2026) | 286 hp: (hp SAE) |
| Rated Engine Power (Since 2026) | 290 PS: (hp ISO) |
| Rated Engine Speed (Since 2026) | 2,100 rpm |
| Torque Rise (Since 2026) | 40 % |
| Front Axle | |
| Front Axle Differential Lock (Since 2026) | 1300 Series MFWD: Limited slip; TLS: Limited slip; TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock) |
| Front Axle Type (Since 2026) | Standard: 1300 Series MFWD: tread range 1524 to 2235 mm (60 to 88 in.); Optional: TLS: Tread range 1524 to 2235 mm; TLS with front brakes available with 40 km/h (24.9 mph); TLS with front brakes standard with 50 km/h (31 mph) |
| Front Hitch | |
| Electric Power (Since 2026) | Seven-pin connector |
| Front Hitch Category (Since 2026) | Category 3N, ground engaging |
| Lift Capacity Through Full Lift Range at Coupling Points (Since 2026) | 6,945 lbs (3,150 kg) |
| Maximum Lift Capacity at Coupling Points (Since 2026) | 11,464 lbs (5,200 kg) |
| Number of Front Selective Control Valves (SCVs) (Since 2026) | One with front hitch |
| Front PTO | |
| Engine rpm (at Rated PTO Speeds) (Since 2026) | 1,940 rpm |
| Front Number of Splines (Since 2026) | 21 |
| Front PTO Rotation (Since 2026) | Counter-clockwise |
| PTO Speed (Since 2026) | 1,000 |
| Hydraulics | |
| Available Flow at a Single Rear SCV (Since 2026) | 35 gpm (132 L/min) |
| Available Flow at Front SCVs (Since 2026) | 33 gpm (125 lpm) |
| Hydraulic System Type (Since 2026) | Closed-center, pressure/flow compensated system with load sensing |
| Number of Mid Selective Control Valves (SCVs) (Since 2026) | 3 |
| Number of Rear Selective Control Valves (SCVs) (Since 2026) | Standard: Four SCVs; Optional: Three to five ISO couplers: 12.7 mm (1/2 in.); Five ISO couplers (SCV 1-5: 12.7-mm [1/2-in.] coupler) |
| Pump Rated Output (Since 2026) | Standard: 63 cc: 162 L/min (43 gpm); Optional: 85 cc: 222.3 L/min (59 gpm) |
| SCV Control (Since 2026) | Electronic |
| Key Specs | |
| Base Machine Weight (Since 2026) | 25,133 lbs (11,400 kg) |
| Displacement (Since 2026) | 549 cu in (8,997 cu cm) |
| Displacement (Since 2026) | 9.0 L |
| Engine Family (Since 2026) | MJDXL09.0319 |
| Engine Make (Since 2026) | John Deere |
| Maximum Engine Power (Since 2026) | 315 hp: (hp SAE) |
| Maximum Engine Power (Since 2026) | 319 PS: (hp ISO) |
| Pump Rated Output (Since 2026) | Standard: 63 cc: 162 L/min (43 gpm); Optional: 85 cc: 222.3 L/min (59 gpm) |
| Rated Engine Power (Since 2026) | 286 hp: (hp SAE) |
| Rated Engine Power (Since 2026) | 290 PS: (hp ISO) |
| Rear Hitch Category (SAE Designation) (Since 2026) | Standard: Category 3N/3 with Quik-Coupler; Optional: Category 3/3N with hook ends, Category 3N/3 with hook ends |
| Transmission Type (Since 2026) | John Deere e23™ 42 km/h (26 mph); Optional: John Deere e23™ Transmission 50 km/h (31 mph), John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph), John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph) |
| Machine Configuration | |
| Drive Type (Since 2026) | 4WD |
| Wheel or Track Configuration (Since 2026) | Wheel |
| Operator Station | |
| Cab Glass Area (Since 2026) | 70.61 sq ft |
| Cab Suspension (Since 2026) | Adjustable cab suspension (Optional) |
| Degree of Seat Swivel, Left Hand (Since 2026) | 8 degree (angle) |
| Degree of Seat Swivel, Right Hand (Since 2026) | 40 degree (angle) |
| Inner Cab Volume (Since 2026) | 114.0 cu ft |
| Instructional Seat (Since 2026) | Standard |
| Primary Display (Since 2026) | G5 - 12.8 in. (32.5 cm) |
| Radio (Since 2026) | AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna |
| Seat Suspension (Since 2026) | Air seat (Standard), ActiveSeat™ II (Optional) |
| Rear Axle | |
| Final Drive (Since 2026) | Inboard planetary three pinion |
| Rear Axle Type (Since 2026) | Standard: Rack-and-pinion or flange axles; Optional: Diameter: 110 x 2550 mm (4.33 x 100.4 in.); Diameter: 110 x 3010 mm (4.33 x 118.5 in.); Diameter: 120 x 2550 mm (4.72 x 100.4 in.); Diameter: 120 x 3010 mm (4.72 x 118.5 in.); Flanged Axle: 335 mm (13.2 in.) |
| Rear Differential Lock (Since 2026) | Full-locking electrohydraulic |
| Rear Hitch | |
| Lift Capacity Through Full Lift Range at 610-mm Behind Hitch Point (Since 2026) | 15212 lb 6900 kg |
| Lift Capacity Through Full Lift Range at Coupling Points (Since 2026) | 6,945 |
| Maximum Lift Capacity at 610-mm Behind Hitch Point (Since 2026) | 17,306 |
| Maximum Lift Capacity Directly at Coupling Points (Since 2026) | Standard (Category 3): 6894 kg (15,200 lb); Optional (Category 3N): 7847 kg (17,300 lb); Standard (Category 3 with hook ends): 6984 kg, Optional (Category 3 with hook ends): 7847 kg (17,300 lb) |
| Rear Hitch Category (SAE Designation) (Since 2026) | Standard: Category 3N/3 with Quik-Coupler; Optional: Category 3/3N with hook ends, Category 3N/3 with hook ends |
| Sensing Type (Since 2026) | Electrohydraulic |
| Rear Power Take-Off (PTO) | |
| Engagement Method (Since 2026) | Electric switch with adjustable modulation |
| Engine rpm at Rated PTO Speeds (540/1.000) (Since 2026) | 1,950 |
| Engine rpm at Rated PTO Speeds (540E/1000/1.000E) (Since 2026) | 1,750 |
| Number of Splines (Since 2026) | 20 |
| PTO Category (Since 2026) | Independent; Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm; Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm; 44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35 mm (1.375 in.) 540E/1000/1000E rpm gearcase; 44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35 mm (1.375 in.) 540/540E/1000 rpm gearcase |
| Rated PTO Power (Since 2026) | 242 hp (180 kw) |
| Rated PTO Power (Since 2026) | 245 PS |
| Steering & Brakes | |
| Steering Type (Since 2026) | Hydraulic power-steering with electric pump back-up; Optional: ActiveCommand Steering 2 (ACS2) w/ electronic back-up pump |
| Technology Integration | |
| Connectivity (Since 2026) | JDLink™ |
| Guidance (Since 2026) | Integrated AutoTrac™ |
| Remote Diagnostics (Since 2026) | ServiceADVISOR™ Remote: available with JDLink hardware and activations; Remote Display Access: available with JDLink hardware and activations |
| Tires | |
| Rear Tires Size (Since 2026) | RCI Group 47/48/49 |
| Transmission | |
| Maximum Speed Forward (Since 2026) | 31 mph (50 kph) |
| Minimum Speed Forward (Since 2026) | 0 mph (0 kph) |
| Transmission Type (Since 2026) | John Deere e23™ 42 km/h (26 mph); Optional: John Deere e23™ Transmission 50 km/h (31 mph), John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph), John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph) |