Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $169,500.00 USD
Apply for Financing| Serial Number: | CEG-1YN544GACPLA00179 |
| Stock Number: | 13-9211 |
| Machine Location: | SOUTH MILLS, NC |
Supplied by HeavyEquipmentData.com →
| Axles And Brakes | |
| Final Drives (Since 2026) | Heavy-duty inboard-mounted planetary |
| Parking Brake (ISO 3450) (Since 2026) | Automatic spring applied, hydraulically released, driveline mounted, sealed wet multi disc |
| Rear Axle Oscillation, Distance Each Direction (Since 2026) | 12 degrees |
| Rear Axle Oscillation, Stop To Stop (Since 2026) | 24 degrees |
| Service Brakes (ISO 3450) (Since 2026) | Hydraulically actuated, spring retracted, self-adjusting, inboard sun-shaft mounted, oil cooled, single disc |
| Tire Size Used To Measure Oscillation (Since 2026) | 20.5 R 25 |
| Cooling | |
| Fan Drive Type (Since 2026) | Hydraulically driven, proportionally controlled, fan forward of coolers |
| Electrical And Lighting | |
| Battery Capacity Per Each (Since 2026) | 950.0 CCA |
| Battery Voltage (Since 2026) | 12 v |
| System Type (Since 2026) | 24 volt with 100-amp alternator |
| Engine | |
| Air Cleaner (Since 2026) | Under-hood, dual-element dry type, restriction indicator in cab monitor for service |
| Aspiration (Since 2026) | Turbocharged, charge air cooled |
| Cylinders (Since 2026) | 4 |
| Displacement (Since 2026) | 276 cu in (4,523 cu cm) |
| Fuel System (Electronically Controlled) (Since 2026) | High-pressure common rail |
| Lubrication (Since 2026) | Full-flow spin-on filter and integral cooler |
| Manufacturer (Since 2026) | John Deere |
| Net Peak Power (Since 2026) | 1,800 rpm |
| Net Peak Power At Rated RPM (ISO 9249) (Since 2026) | 168 hp (125 kw) |
| Net Peak Torque (Since 2026) | 1,100 rpm |
| Net Peak Torque At Rated RPM (ISO 9249) (Since 2026) | 513 lbs ft (696 nm) |
| Net Torque Rise (Since 2026) | 40.0 % |
| Non-Road Emission Standards (Since 2026) | EPA Final Tier 4/EU Stage V |
| Valves Per Cylinder (Since 2026) | 4 |
| General Specifications | |
| Bucket Capacity (Since 2024) | 2.75–3.00 (2.1–2.3) |
| Bucket Capacity (Since 2025) | 2.75–3.00 |
| Engine Power (Since 2024) | 166 (124) |
| Engine Power Net (Since 2025) | 168 hp (125 kw) |
| Engine type (Since 2024) | Deere PowerTech PVS 6068 |
| Engine type (Since 2026) | Deere PowerTech PSS 4045 |
| Max Dump Height (Since 2024) | 9.3 (2.8) |
| Max Dump Height (Since 2025) | 9 ft (3 m) |
| Operating Weight (Since 2024) | 28,646–29,614 (12 993–13 443) |
| Operating Weight (Since 2025) | 28,646–29,886 |
| OperatingWeight (Since 2026) | 28,646–29,886 |
| Hydraulic System And Steering | |
| Hydraulic Dump Cycle Time (Since 2026) | 1 s |
| Hydraulic Lower (Power Down) Cycle Time (Since 2026) | 3 s |
| Hydraulic Raise Cycle Time (Since 2026) | 6 s |
| Hydraulic Total Cycle Time (Since 2026) | 11 s |
| Loader Controls (Since 2026) | 2-function valve; joystick control or fingertip controls (field kit); hydraulic-function enable/disable; optional 3rd- and 4th-function valve with auxiliary lever |
| Max Rated Flow At Rated RPM (Since 2026) | 50 gpm (189 lpm) |
| Pump Type And System (Loader And Steering) (Since 2026) | Variable-displacement, axial-piston pump; closed-center, pressure-compensating system |
| Rated RPM (Since 2026) | 2,350 rpm |
| Steering Articulation Angle Each Direction (Since 2026) | 40 degrees |
| Steering Articulation Full Arc Angle (Since 2026) | 80 degrees |
| Steering Type (ISO 5010) (Since 2026) | Steering-column mounted |
| System Relief Pressure (Loader And Steering) (Since 2026) | 3,650 psi |
| Turning Radius (Measured To Centerline Of Outside Tire) (Since 2026) | 16.4 ft, in. |
| Key Specs | |
| Net Peak Power (Since 2026) | 1,800 rpm |
| Net Peak Power At Rated RPM (ISO 9249) (Since 2026) | 168 hp (125 kw) |
| Net Peak Torque (Since 2026) | 1,100 rpm |
| Net Peak Torque At Rated RPM (ISO 9249) (Since 2026) | 513 lbs ft (696 nm) |
| Serviceability | |
| Axle Oil Without Coolers (Front And Rear, Each) Refill Capacity (Since 2026) | 4 gal (15 l) |
| Cooling System Refill Capacity (Since 2026) | 30 qt |
| Diesel-Exhaust Fluid (DEF) Refill Capacity (Since 2026) | 15 qt |
| Engine Oil With Vertical Spin-On Filter Refill Capacity (Since 2026) | 20 qt |
| Fuel Tank (With Lockable Cap) Refill Capacity (Since 2026) | 76 gal (287 l) |
| Hydraulic Reservoir With Filter Refill Capacity (Since 2026) | 23 gal (86 l) |
| Parking Brake Oil (Wet Disc) Refill Capacity (Since 2026) | 10.0 oz. |
| Transmission Reservoir With Vertical Filter Refill Capacity (Since 2026) | 19 gal (72 l) |
| Transmission System | |
| Operator Interface (Since 2026) | Joystick-mounted F-N-R; Quick-Shift button on hydraulic lever |
| Shift Control (Since 2026) | Electronically modulated, adaptive, load and speed dependent |
| Shift Modes (Since 2026) | Manual/auto (1st–D or 2nd–D); Quick-Shift button with 2 selectable modes: kick-down or kick-up/down; and 3 adjustable clutch cutoff settings |
| Torque Converter (Since 2026) | Single stage, single phase |
| Type (Since 2026) | Countershaft-type PowerShift™ |
| Wheels And Tires | |
| Tire Size Used To Measure (Since 2026) | Advance 20.5 R25, 2 Stars L-3 |
| Tread Width On Standard Tires (Since 2026) | 77 in (195 cm) |
| Width Over Tires On Standard Tires (Since 2026) | 97 in (246 cm) |