Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $99,900.00 USD
Apply for Financing| Stock Number: | 19158 |
| Machine Location: | SAINT GEORGE, SC |
Supplied by HeavyEquipmentData.com →
| Axles And Brakes | |
| Final Drives (Since 2026) | Heavy-duty inboard-mounted planetary |
| Optional Differentials Front (Since 2026) | Dual locking |
| Optional Differentials Rear (Since 2026) | Dual locking |
| Parking Brake (ISO 3450) (Since 2026) | Automatic spring applied, hydraulically released, driveline mounted, oil cooled, multi disc |
| Service Brakes (ISO 3450) (Since 2026) | Hydraulically actuated, inboard sun-shaft mounted, oil cooled, self adjusting, single disc |
| Standard Differentials Front (Since 2026) | Hydraulic locking |
| Standard Differentials Rear (Since 2026) | Conventional |
| Cooling | |
| Fan Drive Type (Since 2026) | Hydraulically driven, proportionally controlled, fan aft of coolers |
| Electrical And Lighting | |
| Battery Capacity Per Each (Since 2026) | 950.0 CCA |
| Battery Voltage (Since 2026) | 24 v |
| Number Of Batteries (Since 2026) | 2 |
| Optional Alternator Rating (Since 2026) | 140 amp |
| Standard Alternator Rating (Since 2026) | 100 amp |
| System Type (Since 2026) | 24 volt with 100-amp alternator |
| Engine | |
| Air Cleaner (Since 2026) | Under-hood, dual-element dry type, restriction indicator in cab monitor for service |
| Aspiration (Since 2026) | Series turbocharged, charge air cooled |
| Cylinders (Since 2026) | 6 |
| Displacement (Since 2026) | 415 cu in (6,801 cu cm) |
| Fuel System (Electronically Controlled) (Since 2026) | High-pressure common rail |
| Gross Peak Power At Rated RPM (ISO 9249) (Since 2026) | 260 hp (194 kw) |
| Gross Peak Torque At Rated RPM (ISO 9249) (Since 2026) | 811 lbs ft (1,100 nm) |
| Lubrication (Since 2026) | Full-flow spin-on filter and integral cooler |
| Manufacturer (Since 2026) | John Deere |
| Net Peak Power At Rated RPM (ISO 9249) (Since 2026) | 249 hp (186 kw) |
| Net Peak Torque At Rated RPM (ISO 9249) (Since 2026) | 783 lbs ft (1,062 nm) |
| Net Torque Rise (Since 2026) | 58.0 % |
| Non-Road Emission Standards (Since 2026) | EPA Final Tier 4/EU Stage V |
| Valves Per Cylinder (Since 2026) | 4 |
| General Specifications | |
| Bucket Capacity (Since 2021) | 4.0–4.75 (3.1–3.6) |
| Bucket Capacity (Since 2025) | 4.0–4.75 |
| Engine Power (Since 2021) | 249 hp (186 kw) |
| Engine Power Net (Since 2025) | 249 hp (186 kw) |
| Engine type (Since 2021) | Deere PSS 6068 |
| Engine type (Since 2022) | Deere PowerTech PSS 6068 |
| Max Dump Height (Since 2021) | 9 ft (3 m) |
| Operating Weight (Since 2021) | 41,246–42,913 (18 709–19 465) |
| Operating Weight (Since 2022) | 41,246–42,913 (18,709–19,465) |
| Operating Weight (Since 2024) | 41,246–42,307 (18 709–19 190) |
| Operating Weight (Since 2025) | 41,246–42,913 |
| OperatingWeight (Since 2026) | 41,246–42,913 |
| Hydraulic System And Steering | |
| Hydraulic Dump Cycle Time (Since 2026) | 1 s |
| Hydraulic Lower (Power Down) Cycle Time (Since 2026) | 4 s |
| Hydraulic Raise Cycle Time (Since 2026) | 5 s |
| Hydraulic Total Cycle Time (Since 2026) | 11 s |
| Loader Controls (Since 2026) | Two-function valve; joystick control or fingertip controls; hydraulic-function enable/disable; optional 3rd- and 4th-function valve with auxiliary lever |
| Max Rated Flow At Rated RPM (Since 2026) | 82 gpm (310 lpm) |
| Pump Type And System (Loader And Steering) (Since 2026) | Variable-displacement, axial-piston pump; closed-center, pressure-compensating system |
| Rated RPM (Since 2026) | 2,250 rpm |
| Steering Articulation Angle Each Direction (Since 2026) | 40 degrees |
| Steering Articulation Full Arc Angle (Since 2026) | 80 degrees |
| Steering Type (ISO 5010) (Since 2026) | Power, fully hydraulic |
| System Pressure At Max Rated Flow (Since 2026) | 1,000 psi |
| System Relief Pressure (Loader And Steering) (Since 2026) | 3,650 psi |
| Turning Radius (Measured To Centerline Of Outside Tire) (Since 2026) | 18.5 ft, in. |
| Key Specs | |
| Net Peak Power At Rated RPM (ISO 9249) (Since 2026) | 249 hp (186 kw) |
| Net Peak Torque At Rated RPM (ISO 9249) (Since 2026) | 783 lbs ft (1,062 nm) |
| Maximum Forward Travel Speeds (Standard 5-Speed With Lockup Torque Converter) | |
| Range 1 (Since 2026) | 4 mph (7 kph) |
| Range 2 (Since 2026) | 8 mph (12 kph) |
| Range 3 (Since 2026) | 13 mph (20 kph) |
| Range 4 (Since 2026) | 15 mph (25 kph) |
| Tire Size Used To Measure Travel Speeds (Since 2026) | 23.5 R 25 |
| Serviceability | |
| Axle Oil Without Coolers (Front And Rear, Each) Refill Capacity (Since 2026) | 6 gal (22 l) |
| Cooling System Refill Capacity (Since 2026) | 47 qt |
| Diesel-Exhaust Fluid (DEF) Refill Capacity (Since 2026) | 20 qt |
| Engine Oil With Vertical Spin-On Filter Refill Capacity (Since 2026) | 29 qt |
| Fuel Tank (With Lockable Cap) Refill Capacity (Since 2026) | 93 gal (350 l) |
| Hydraulic Reservoir With Filter Refill Capacity (Since 2026) | 28 gal (105 l) |
| Parking Brake Oil (Wet Disc) Refill Capacity (Since 2026) | 22.0 oz. |
| Transmission Reservoir With Vertical Filter Refill Capacity (Since 2026) | 6 gal (23 l) |
| Transmission System | |
| Operator Interface (Since 2026) | Steering-column or joystick-mounted F-N-R and gear-select lever; Quick-Shift button on hydraulic lever |
| Shift Control (Since 2026) | Electronically modulated, adaptive, load and speed dependent |
| Shift Modes (Since 2026) | Manual/auto (1st–D or 2nd–D); Quick-Shift button with two selectable modes: kick-down or kick-up/down; and four clutch cutoff settings |
| Torque Converter (Since 2026) | Single stage, single phase |
| Type (Since 2026) | Countershaft-type PowerShift™ |
| Wheels And Tires | |
| Tread Width On Standard Tires (Since 2026) | 85 in (217 cm) |
| Width Over Tires On Standard Tires (Since 2026) | 113 in (288 cm) |