Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Auction Pricing
Auction Info: Starting on 2026-09-24 Click here to place a bid
| Hours: | 28517 |
| Serial Number: | KMTWA096E01055551 |
| Machine Location: | CHICAGO, IL |
Supplied by HeavyEquipmentData.com →
| Axles | |
| Drive System | Four-wheel drive |
| Front | Fixed, semi-floating |
| Rear | Center-pin support, semi-floating, 24 ? total oscillation |
| Brakes | |
| Emergency Brake | Parking brake is commonly used |
| Parking Brake | Wet |
| Service Brake | Hydraulically actuated |
| Capacities | |
| Cooling System | 32 gal (120 l) |
| Engine Oil | 12 gal (45 l) |
| Front Axle | 5,309 cu in (87,001 cu cm) |
| Fuel Tank | 125 gal (473 l) |
| Hydraulic System | 89 gal (337 l) |
| Rear Axle | 21 gal (81 l) |
| Torque Converter, Transmission And Retarder Cooling | 20 gal (76 l) |
| Dimensions | |
| Ground Clearance | 1 ft (0 m) |
| Height | 12 ft (4 m) |
| Height To Top Of Cab | 12 ft (4 m) |
| Length | 32 ft (10 m) |
| Length | 386 in (982 cm) |
| Turning Circle | 50 ft (15 m) |
| Weight | 74,010 lbs (33,565 kg) |
| Wheelbase | 12 ft (4 m) |
| Width | 10 ft (3 m) |
| Width Over Tires | 10 ft (3 m) |
| Driveline | |
| Brake | Hydraulic, Wet disc |
| Maximum Speeds/Fwd Mph (Km/H) | 35 |
| Maximum Speeds/Rev Mph (Km/H) | 38 |
| Number Of Speeds - Forward | 4 |
| Number Of Speeds - Reverse | 4 |
| Ride Control System | Standard |
| Transmission | Automatic Powershift |
| Engine | |
| Air Cleaner | Dry type |
| Aspiration | Turbocharged, after cooled |
| Bore | 6 in (14 cm) |
| Displacement | 930 cu in (15,242 cu cm) |
| Engine Make | 2,238 |
| Engine Model | SAA6D140E-5 |
| Engine Type | Water-cooled, 4-cycle |
| Fan Drive Method | ?Hydraulic |
| Filter | Full-flow type |
| Fuel System | Direct injection |
| Governor | All-speed, electronic |
| Horsepower, Gross-Sae J1995 | 357 hp (266 kw) |
| Horsepower, Net-Iso 9249 | 353 hp (263 kw) |
| Horsepower, Net-Sae J1349 | 333 hp (248 kw) |
| Lubrication Method | Gear pump, force-lubricatio |
| Number Of Cylinders | 6 |
| Piston Displacement | 930 cu in (15,242 cu cm) |
| Stroke | 7 in (17 cm) |
| Final Drive | |
| Differential Gear | Torque proportioning |
| Final Reduction Gear | Planetary gear, single reduction |
| Reduction Gear | Spiral bevel gear |
| Hydraulic System | |
| Bore | 4 in (10 cm) |
| Bucket Cylinde Bore | 7 in (19 cm) |
| Bucket Cylinde Stroke | 27 in (68 cm) |
| Control Positions Boom | Raise, hold, lower, and float |
| Control Positions Bucket | Tilt-back, hold, and dump |
| Control Valve | 2-spool type |
| Dump Time | 2 sec |
| Hydraulic Cylinders Type | Double-acting, piston type |
| Lift Cylinder | 2 |
| Lift Cylinder Bore | 6 in (16 cm) |
| Lift Cylinder Stroke | 35 in (90 cm) |
| Loader Control Capacity | 85 gpm (320 lpm) |
| Loader Control Type | Piston Pump |
| Lower Time | 4 sec |
| Number Of Cylinders | 2 |
| Pump Flow Capacity | 32 gpm (120 lpm) |
| Pump Type | Piston Pump |
| Raise Time | 7 sec |
| Relief Valve Setting | 34.3 MPa 350 kgf/cm 2 4,980 ps |
| Steering Pump Type | Piston Pump |
| Stroke | 19 in (49 cm) |
| Operational | |
| Breakout Force | 25,000 kgf |
| Bucket Capacity Range – Sae | 4.3-5.6 m3 |
| Bucket Description | GP Bucket, Bolt Edge |
| Bucket Link Type | Z-bar |
| Bucket Width | 9 ft (3 m) |
| Dump Clearance, @45 Degrees Dump Angle | 11 ft (3 m) |
| Dump Reach, @45 Degrees Dump Angle | 5 ft (2 m) |
| Standard Bucket Capacity – Sae | 7 cu yd |
| Static Tipping Load,Full Turn | 50,510 lbs (22,911 kg) |
| Steering System | |
| Minimum Turning Radius At The Centre Of Outside Tire | 21 ft (6 m) |
| Steering System Type | Articulated |
| Tires | |
| Standard Fitment Size | 29.5 R25 2Star VSDL L5 |
| Transmission | |
| Max Speed - Forward | 22 mph (35 kph) |
| Max Speed - Reverse | 23 mph (37 kph) |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 4 |
| Transmission Type | Full-power shift, planetary type |
| Weights | |
| Operating Weight | 77,162 lbs (35,000 kg) |