Create a CEG Account  /  CEG Login

2025 New Holland W50C TC For Sale in Waupaca, WI

2025 New Holland W50C TC
2025 New Holland W50C TC
2025 New Holland W50C TC
2025 New Holland W50C TC
2025 New Holland W50C TC
2025 New Holland W50C TC
2025 New Holland W50C TC
2025 New Holland W50C TC
2025 New Holland W50C TC 2025 New Holland W50C TC 2025 New Holland W50C TC 2025 New Holland W50C TC 2025 New Holland W50C TC 2025 New Holland W50C TC 2025 New Holland W50C TC 2025 New Holland W50C TC

/ Save to Watch List

For Sale: Call for Price




Swiderski Equipment, Inc.


Request an equipment inspection

Get shipping quotes


Contact: Swiderski Equipment - Waupaca

Click for Phone Number

Machine Info:

Serial Number:O E47291
Stock Number:E47291
Machine Location:WAUPACA, WI

Description:

NEW NH W50C WHEEL LOADER

Machine Details:

General Specifications
horsepower58
horsepowerUnithorsepower
hours5


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Bucket
Breakout Force 9,048 lbs (4,103 kg)
Bucket Capacity - Struck 1 cu yd
Bucket Width 6 ft (2 m)
Dimensions
Angle Of Departure 28 degrees
Bucket Reach - 7 Ft 0 (2.13m), 45° Dump 37 in (95 cm)
Bucket Reach - Fully Raised, 45° Dump 26 in (67 cm)
Cab Height 97 in (246 cm)
Dig Depth 3 in (7 cm)
Dump Height - Fully Raised, 45° Dump 94 in (240 cm)
Ground Clearance Under Axles 13 in (32 cm)
Ground Clearance Under Shaft 17 in (44 cm)
Hinge Pin Height - Fully Raised 123 in (311 cm)
Operating Height - Fully Raised With Spillgaurd 55 in (140 cm)
Overall Length - Bucket Level On Ground 205 in (522 cm)
Overall Width Without Bucket 69 in (174 cm)
Rear Axle Oscillation, Total 18 degrees
Total Angle 80 degrees
Tread Width 55 in (140 cm)
Turning Angle -From Center 40 degrees
Turning Radius - Outside 12 ft (4 m)
Wheelbase 7 ft (2 m)
Drive Train
Differential Open or LSD
Front Axle - Differential Ratio 4
Front Axle - Final Axle Ratio 22
Front Axle - Planetary Ratio 6
Gear Box - 1st Ratio 2
Parking Brakes Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment
Planetaries Outboard
Pump Flow 26 gpm (98 lpm)
Pump Relief 6 psi
Service Brakes Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle
Transmission Hydrostatic transmission
Electrical
Alternator 120 amps
Batteries 95 AHR, 900 CCA
Voltage 12 V
Engine
Air Filter Type Dry type element with warning restriction indicator
Bore 4 in (10 cm)
Engine Model F5HFL463B*F001
Engine Oil SAE 10W40, CJ-4 DIESEL, SAE 0W40, CJ-4 DIESEL
Engine Speed - High Idle 2,500 rpm
Engine Speed - Rated Speed, Full Load 2,500 rpm
Engine Speed- Low Idle 950 rpm
Engine Type 4-stroke
Fan Direct drive
Fuel Filter Replaceable, full flow
Fuel Injection High pressure common rail injection
Fuel Type Diesel
Horsepower - Gross 58 hp (43 kw)
Horsepower -Net 55 hp (41 kw)
Lubrication/Cooling Oil Pump integral
Make / Displacement Liter 3
Number Of Cylinders 4 cylinders
Oil Filtration Replaceable, full flow
Pump Deep sump plate cooler with pressurized under-piston nozzles
Pump Operating Angles - Fore And Aft 35 degrees
Pump Operating Angles -Side-To-Side 35 degrees
Radiator Core Type Staggered
Stroke 4 in (11 cm)
General Specifications
Bucket Capacity (Since 2016) 1.0 (.76)
Bucket Capacity (Since 2017) 1.44 (1.10)
Engine Power (Since 2016) 55 (41)
Engine type (Since 2016) FPT
Max Dump Height (Since 2016) 7.8 (2.4)
Max Dump Height (Since 2017) 7.6 (2.3)
Operating Weight (Since 2016) 10,913
Operating Weight (Since 2017) 10,913 (4,950)
Hydraulic
Dump Cylinder - Bore Diameter 3 in (8 cm)
Dump Cylinder - Rod Diameter 2 in (5 cm)
Dump Cylinder - Stroke 15 in (39 cm)
Filtration 15-micron, full flow replaceable cartridges on return line
Flow At 2500 Rpm 17.7 gal/hour
Lift Cylinder - Rod Diameter 2 in (5 cm)
Lift Cylinder - Stroke 24 in (60 cm)
Lift Cylinder(S) one
Lift Cylinder-Bore Diameter 4 in (10 cm)
Loader Auxiliary Steering Hydraulic orbital center-pivot articulating w/on-demand oil flow
Loader Control Valve Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller
Main Relief Pressure 3,335 psi
Pump (Steering/Implement) Open-centered pressure/flow compensated. Fixed gear pump
Pump Type Additional HF pump
Speeds
Rabbit - Forward 13 mph (20 kph)
Rabbit- Reverse 13 mph (20 kph)
Turtle - Forward 3 mph (5 kph)
Turtle - Reverse 3 mph (5 kph)
Weights
Operating Weights 10,913 lbs (4,949 kg)
Reference Configuration Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator
Reference Tires 12.5-18 PRMPT Dunlop Tires

Dealer Contact Info:

Swiderski Equipment, Inc.



Contact: Swiderski Equipment - Waupaca

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.