Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: $79,900.00 USD
Apply for Financing| Stock Number: | 179336 |
| Machine Location: | EAST SYRACUSE, NY |
Supplied by HeavyEquipmentData.com →
| Bucket | |
| Breakout Force | 13,927 lbs (6,316 kg) |
| Bucket Capacity - Struck | 1 cu yd |
| Bucket Width | 7 ft (2 m) |
| Dimensions | |
| Angle Of Departure | 32 degrees |
| Bucket Reach - 7 Ft 0 (2.13m), 45° Dump | 52 in (132 cm) |
| Bucket Reach - Fully Raised, 45° Dump | 33 in (85 cm) |
| Cab Height | 106 in (268 cm) |
| Dig Depth | 3 in (8 cm) |
| Dump Height - Fully Raised, 45° Dump | 106 in (269 cm) |
| Ground Clearance Under Axles | 15 in (37 cm) |
| Ground Clearance Under Shaft | 19 in (49 cm) |
| Hinge Pin Height - Fully Raised | 134 in (340 cm) |
| Operating Height - Fully Raised With Spillgaurd | 170 in (432 cm) |
| Overall Length - Bucket Level On Ground | 224 in (568 cm) |
| Overall Width Without Bucket | 73 in (186 cm) |
| Rear Axle Oscillation, Total | 20 degrees |
| Total Angle | 80 degrees |
| Tread Width | 59 in (150 cm) |
| Turning Angle -From Center | 40 degrees |
| Turning Radius - Outside | 13 ft (4 m) |
| Wheelbase | 7 ft (2 m) |
| Drive Train | |
| Differential | Open Diff or LSD or 100% Diff Lock |
| Front Axle - Differential Ratio | 4 |
| Front Axle - Final Axle Ratio | 22 |
| Front Axle - Planetary Ratio | 6 |
| Gear Box - 1st Ratio | 3 |
| Gear Box - 2nd Ratio | 1 |
| Parking Brakes | Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment |
| Planetaries | Outboard |
| Pump Flow | 37 gpm (140 lpm) |
| Pump Relief | 6 psi |
| Service Brakes | Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle |
| Transmission | Hydrostatic transmission |
| Electrical | |
| Alternator | 120 amps |
| Batteries | 95 AHR, 900 CCA |
| Voltage | 12 V |
| Engine | |
| Air Filter Type | Dry type element with warning restriction indicator |
| Bore | 4 in (10 cm) |
| Engine Model | F5HFL463A*F004 |
| Engine Oil | SAE 10W40, CJ-4 DIESEL, SAE 0W40, CJ-4 DIESEL |
| Engine Speed - High Idle | 2,500 rpm |
| Engine Speed - Rated Speed, Full Load | 2,500 rpm |
| Engine Speed- Low Idle | 950 rpm |
| Engine Type | 4-stroke |
| Fan | Direct drive |
| Fuel Filter | Replaceable, full flow |
| Fuel Injection | High pressure common rail injection |
| Fuel Type | Diesel |
| Horsepower - Gross | 74 hp (55 kw) |
| Horsepower -Net | 70 hp (52 kw) |
| Lubrication/Cooling Oil Pump | integral |
| Make / Displacement Liter | 3 |
| Number Of Cylinders | 4 cylinders |
| Oil Filtration | Replaceable, full flow |
| Pump | Deep sump plate cooler with pressurized under-piston nozzles |
| Pump Operating Angles - Fore And Aft | 35 degrees |
| Pump Operating Angles -Side-To-Side | 35 degrees |
| Radiator Core Type | Staggered |
| Stroke | 4 in (11 cm) |
| General Specifications | |
| Bucket Capacity (Since 2016) | 1.4 (1.1) |
| Bucket Capacity (Since 2017) | 1.87 (1.43) |
| Bucket Capacity (Since 2022) | 1.4 (1) |
| Bucket Capacity (Since 2025) | 1 cu yd |
| Engine Power (Since 2016) | 70 (52) |
| Engine Power Net (Since 2025) | 70 hp (52 kw) |
| Engine type (Since 2016) | FPT |
| Max Dump Height (Since 2016) | 8.9 (2.7) |
| Max Dump Height (Since 2017) | 8.2 (2.5) |
| Max Dump Height (Since 2022) | 8.9 (2.67) |
| Max Dump Height (Since 2023) | 8.75 (2.67) |
| Max Dump Height (Since 2025) | 9 ft (3 m) |
| Operating Weight (Since 2016) | 13,184 |
| Operating Weight (Since 2017) | 13,303 (6,034) |
| Operating Weight (Since 2023) | 13,184 (6,130) |
| Operating Weight (Since 2025) | 13,668 lbs (6,199 kg) |
| OperatingWeight (Since 2026) | 13,668 lbs (6,199 kg) |
| Hydraulic | |
| Dump Cylinder - Bore Diameter | 4 in (9 cm) |
| Dump Cylinder - Rod Diameter | 2 in (6 cm) |
| Dump Cylinder - Stroke | 20 in (51 cm) |
| Filtration | 15-micron, full flow replaceable cartridges on return line |
| Flow At 2500 Rpm | 22.5 gal/hour |
| Lift Cylinder - Rod Diameter | 2 in (5 cm) |
| Lift Cylinder - Stroke | 30 in (75 cm) |
| Lift Cylinder(S) | one |
| Lift Cylinder-Bore Diameter | 3 in (9 cm) |
| Loader Auxiliary Steering | Hydraulic orbital center-pivot articulating w/on-demand oil flow |
| Loader Control Valve | Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller |
| Main Relief Pressure | 3,335 psi |
| Pump (Steering/Implement) | Open-centered pressure/flow compensated. Fixed gear pump |
| Pump Type | Additional HF pump |
| Speeds | |
| High Speed - Rabbit- Forward | 21 mph (33 kph) |
| High Speed - Rabbit- Reverse | 21 mph (33 kph) |
| High Speed - Turtle - Reverse | 3 mph (5 kph) |
| High Speed - Turtle- Forward | 3 mph (5 kph) |
| Rabbit - Forward | 9 mph (14 kph) |
| Rabbit- Reverse | 9 mph (14 kph) |
| Turtle - Forward | 3 mph (5 kph) |
| Turtle - Reverse | 3 mph (5 kph) |
| Weights | |
| Operating Weights | 13,184 lbs (5,979 kg) |
| Reference Configuration | Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator |
| Reference Tires | 365/80 R20 Dunlop Tires |
| With Optional Counterweight | 13,514 lbs (6,129 kg) |