Description:
Air Con!, NO DEF!!!, Full cab, heat and air con., Standard fixed carriage., Foam filled tires., Here are the basic machine specifications for the 2025 SkyTrak 10042 telescopic handler (telehandler), configured with the smaller engine option (74 HP Cummins, no DEF required), enclosed cab with heat and air conditioning, standard fork carriage, and foam-filled tires. These are based on current JLG/SkyTrak official sources, spec sheets, and dealer listings for recent/2025 models., Lift & Load Performance:, Maximum lift capacity (rated): 10,000 lbs (4,536 kg), Capacity at max height: 6,000 lbs (2,722 kg), Capacity at max reach: 6,000 lbs (2,722 kg), Max lift height: 42 ft 1 in (12.83 m / 12.8 m), Max forward reach: 26 ft 7 in (8.10 m), Note: Specs assume standard carriage/forks; always refer to the load chart in the cab for specific configurations., Engine (smaller/optional option):, Model: Cummins QSF 3.8L (or similar Tier 4 Final compliant), Horsepower: 74 HP (no Diesel Exhaust Fluid/DEF required), Fuel type: Diesel, Fuel tank capacity: 35 gal (132 L), Cab & Comfort:, Enclosed cab: Standard with heat and air conditioning (optional but commonly specified), Controls: Multifunction single joystick (electric over hydraulic) for boom functions, auxiliary hydraulics, and attachment tilt, Other: Redesigned dashboard, integrated armrest, improved visibility, Drive & Performance:, Transmission: 4-speed powershift (4 forward, 3 reverse), Drive system: Full-time planetary 4-wheel drive, Max travel speed: Varies by model year (typically ~20-25 mph unloaded; consult dealer for exact), Frame leveling: ±10°, Drawbar pull: ~24,500 lbs (11,113 kg), Lift/lower speeds: Improved boom speeds (e.g., lift up ~15 sec, down ~12-15 sec depending on load), Tires & Dimensions:, Tires: Foam-filled (standard for puncture resistance; often 400/75-28 or 17.5x25 size equivalents), Overall length (to fork face): ~18 ft 10 in (5.74 m), Overall width: ~8 ft 6 in (2.59 m), Overall height (cab): ~8 ft 5 in (2.57 m), Wheelbase: 10 ft (3.04 m), Ground clearance: ~1 ft 6 in (0.46 m), Approximate operating weight: 26,800–27,300 lbs (12,160–12,383 kg; varies with cab/options), Other Key Features:, Standard fork carriage: Included (quick-attach or similar; load ratings per forks/carriage), Additional: Rear counterweight with integrated tow hitch, LED work/motion lights, ClearSky Smart Fleet connectivity hardware (standard), Stabil-Trak system for stability, No outriggers on this model (unlike higher-reach variants),, The 74 HP engine is the "smaller" option (vs. standard 110 HP Cummins QSB3.8L), offering good performance for many applications while simplifying maintenance (no DEF). Specs are consistent across 2024-2025 models with minor updates like improved joystick/boom speeds and standard connectivity., For exact load charts, current pricing, or any regional variations (e.g., emissions compliance), check the official SkyTrak/JLG website ( or ) or a dealer brochure, as options can slightly affect weight/performance.
SkyTrak 10042 telehandler is a rough-terrain telescopic handler designed for material lifting and placement on construction and industrial job sites. It features a maximum lift capacity of 10,000 lb and a maximum lift height of 42 ft, with forward reach for loading, unloading, and positioning materials. The machine is commonly used for handling palletized loads, trusses, and other heavy materials in confined or uneven terrain. SkyTrak telehandlers are known for four-wheel drive, frame leveling, and boom-mounted attachment capability. The 10042 model is part of the SkyTrak telehandler lineup used in construction, masonry, and general material handling applications.
