Straightline 42X70 For Sale in Eau Claire, WI

PO#2051807, Equipment On Order, Equipment As Follows:,, Two are designed to ride on the top of third conveyor for over road transport, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Conveyor Frames: 4 x 4 x 5/16” Chords with 2 x 2 x 1/4” Lattice members – with 3 x 3 x 3/16” angle recessed in frame for troughing idlers, Truss: 30” Deep, Adjustable height under carriage – manual pin adjustment, Adjustable stands on tail end, Axle: Single – 8 bolt hubs - single 11.00-22.5 tires (on middle & top conveyors), Axle: Tandem with duals – 10 bolt hubs – dual 11.00-22.5R tires (on transport conveyor), Air brakes and light package on transport conveyor, Extra channel lifting points, Head pulley: 16” x 44” C.F. – 3/8” H.B. lagging – 3 7/16” shaft, Tail pulley: 14” x 44” Wing style – 2-15/16” shaft, Troughing idlers: CEMA C – 5” rollers on 4’ centers, Return idlers: CEMA C – 5” rollers on 10’ centers, Return idler Nip Guards, Gear Reducer: Master PT size 6 with back stop, Motor: 30HP 1800 230/460/3ph Toshiba (motor mounted on opposite side of reducer), Electrical switch gear – with Interlocking, 100ft of extra cord, Electrical cord hooks on one side, Bearings: Dodge 2 bolt pillow block 3 7/16” on head pulleys and 2 15/16” on tail pulleys, Take-ups: Dodge wide slot, Conveyor belt: 42” 3ply 3/16” x 1/16”, 350FPM / 1100TPH, Belt scraper: By Superior Exterra, 5’ receiving hopper with extra idlers at load point, Hitch: Fifth wheel and tow eye (on transport conveyor, Guarding: Tail pulley and V-belts, Sandblasted: Frame (1) Coat urethane primer (1) Coat urethane finished