Description:
ON LEASE, Equipment As Follows:, Conveyor Frame, Main Frame-36" deep truss, Chord Angles-4" x 3" x 1/4", Bottom Chord Angles-Bottom Chord upsized between pinpoints to 5" x 3" x 1/2", Lattice Members-1-3/4" x 1-3/4" x 3/16", Containerized-not included, Drive Specifications, Drive-Class I single wrap-, Gear Reducer-Shaft Mount, Backstop-installed in reducer, Motor-50 HP TEFC, V-Belt Drive-with drive guard, Capacity-750 STPH of 100 PCF material, 25° surcharge (90% fines, 10% spherical lumps, 6" minus), Belt Speed-400 fpm, Drive Pulley-24" diameter, ceramic lagged drum, Tail Pulley-16" diameter, CEMA Chevron® wing, Snub Pulley-20" diameter, CEMA Chevron® wing, Head Pulley-18" diameter, plain steel drum, Shafts-Turned and Polished, Bearings-Included, Take-up-Screw type, Portability, Conveyor Splice-hydraulic top folding head section, with integral belt keeper, Undercarriage-Hydraulic raise with 7.5 hp electric pumping unit, Axle Type-FD40 axle, Transport Axle-(8) 11R-22.5 transport tires with brakes and mud flaps, Radial Axle-(4) 385/65D-19.5 tires on hydraulic outriggers, power travel (requires hyd. Raise), Compensation Linkage-not included, Radial Travel-(4) hydraulic driven planetary (all wheel drive), Fifth Wheel-for road travel, bolt on design, Anchor Pivot Plate-maintains tail end during radial travel, Brakes-complete air brake package, Lights-brake and directional signals, Mud Flaps-installed behind transport wheels, Landing Gear-2 speed crank-down, fold-up design, Towing Eye-pintle hitch type, Conveyor Components, Belting-3-ply 3/16 x 1/16 330PIW, Belt Splice-Factory vulcanized belt splice, Scrapers-Superior Exterra® Primary Belt Scraper, Return Cleaner-Superior V-Plow UHMW blade, Idlers-CEMA C, 5" dia. sealed for life ball bearings, Idler Seal-Superior Standard SpinGuard® Seal, Load Area-20° trough, steel rolls, 12-16" spacing, Trough-35° trough, steel rolls, on 4' spacing, Returns-flat steel rolls on 10' spacing, Radial Receiving Hopper-sloped, 5' long, bolt on design, Radial Hopper Liner-not included, Gathering Trough-5' long with adjustable rubber flashing, Additional Specifications, Guarding-For drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected, Voltage-480 V / 3 PH / 60 Hz - 1800RPM, Cord Holders-(1) set bent pipe style, Control Panel Plate-bracket only for panel and hydraulic levers, Control Panel-control panel and wiring included for on board motors, Hourmeter-Analog hourmeter included on door of panel-, Paint-1 coat primer, 1 coat finish enamel, Superior Beige (12-00619), Guard Paint-Yellow, Idler Paint-Powder coated Superior Orange, Patents-Unit includes patents, Owner's Manual-(1) copy in English included for operation and maintenance, Sign Plate-RB Scott sign plate installed
