Create a CEG Account  /  CEG Login

2007 Volvo G930 For Sale in Bowie, TX


/ Save to Watch List

Auction Pricing



   Auction Info: Starting on 2026-08-06   Click here to place a bid   Minimum Bid: $5



Machine Info:

Machine Location:BOWIE, TX
More Information:https://www.proxibid.com:443/heavy-construction-equipment/motor-graders/2007-volvo-g930-articulated-motor-grader/lotInformation/102158211?utm_source=ceg&utm_medium=referral&utm_campaign=atgxl_ceg&utm_content=73143

Description:

Location: Royal Auction Yard Bowie, TX. Government Fleet Asset, PIN: VCE0G930E00039906. Hours read 5,902 hours. Pwd. by 150HP Volvo 6-cylinder diesel engine, powershift transmission. Equipped with 14ft. hydraulic moldboard, 50 degree articulating angle, articulated frame, 18 degree wheel lean, 16 degree total oscillation, hydraulic joystick lever controls, blade side shift, blade tilt, wheel lean, enclosed cab with heat and a/c, 12v charger. Ran, drove and operated during limited function test at check in.


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front 47 degrees
Blade Tip Angle - Rear 5 degrees
Diameter 64 in (163 cm)
Max Lift Above Ground 19 in (49 cm)
Max Reach Outside Tires - Left 80 in (203 cm)
Max Reach Outside Tires - Right 79 in (201 cm)
Rotation 360 degrees
Shift Left 31 in (77 cm)
Shift Right 30 in (75 cm)
Dimensions
Blade Base 9 ft (3 m)
Front Ground Clearance 2 ft (1 m)
Height to Top of Isomount Cab 11 ft (3 m)
Overall Length 29 ft (9 m)
Wheelbase 21 ft (6 m)
Width Over Tires 8 ft (3 m)
Engine
Aspiration Turbocharged Aftercooled
Displacement 436 cu in (7,145 cu cm)
Engine Model D7EGCE3
Max Power 204 hp (152 kw)
Net Power Gears 7-8 204 hp (152 kw)
Net Torque Gears 7-8 684 lbs ft (927 nm)
Number of Cylinders 6
Power Measured @ 1,800 rpm
Torque Measured @ 1,550 rpm
Front Axle
Ground Clearance 2 ft (1 m)
Oscillation - Total 16 degrees
Wheel Lean 18 degrees
Hydraulic System
Pump Flow 55 gpm (208 lpm)
Pump Type Axial piston pump
Relief Valve Pressure 3,000 psi
Moldboard
Blade Down Pressure 18,021 lbs (8,174 kg)
Blade Pull at Max Weight 28,260 lbs (12,819 kg)
Max Depth of Cut 31 in (79 cm)
Moldboard Height 25 in (64 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)
Operating Specifications
Alternator Supplied Amperage 80 amps
Cooling System Fluid Capacity 8 gal (31 l)
Fuel Capacity 92 gal (348 l)
Hydraulic System Fluid Capacity 24 gal (91 l)
Max Operation Weight - Front Axle 16,700 lbs (7,575 kg)
Max Operation Weight - Rear Axle 31,400 lbs (14,243 kg)
Max Operation Weight - Total 42,500 lbs (19,278 kg)
Oil System Fluid Capacity 6 gal (22 l)
Operating Voltage 24 volts
Std Operation Weight - Front Axle 10,360 lbs (4,699 kg)
Std Operation Weight - Rear Axle 24,470 lbs (11,099 kg)
Std Operation Weight - Total 34,830 lbs (15,799 kg)
Tandem Case Fluid Capacity (each) 26 gal (100 l)
Tire Size 14:00 x 24 G-2
Transmission Fluid Capacity 16 gal (61 l)
Steering System
Articulation Angle 50 degrees
Turning Radius 24 ft (7 m)
Transmission
Max Speed - Forward 28 mph (46 kph)
Max Speed - Reverse 20 mph (32 kph)
Number of Gears - Forward 8
Number of Gears - Reverse 4
Transmission Type HTE 840 Fully sequential direct drive volvo powershift transmission

Dealer Contact Info:

Royal Auction Group, Inc.

Click for Phone Number


Request an equipment inspection
Get shipping quotes




Log In to Your CEG Account







×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.