The E 1250 is designed for up to 115 hours of run time at more than 87 percent efficiency and with accessories can thaw up to 3,750 sq. ft. (348 sq m) of frozen ground at an average rate of 1 ft. (.3 m) deep per day, cure up to 8,750 sq. of concrete, prev
Wacker Neuson Climate Technology has introduced the E 1250 hydronic ground heater for the 2014-2015 heating season. At 138,000 BTU/hr and 1,250 ft. (381 m) of hose, the E 1250 provides reliable mobile heat for any job site application. Three configurations are available, the value package, the standard package and the premium package to fit specific heat needs and budget requirements.
The E 1250 heaters are engineered with rental friendly features, such as multi-fuel burner options (diesel or natural gas/propane) a new telematics-ready digital control panel with intelligent systems to monitor heater status and provide early detection of low fuel levels, with clear and easy to understand diagnosis and centralized resetting of the most common heater faults.
Standard features include an integrated 3kW liquid cooled generator (standard and premium models), with easy access oil, filter and coolant changes and build in wet-stacking protection, a dual color performance strobe light to indicate normal operation, faults, or low fuel from a distance, a 2-point lift system which provides greater stability and stronger lift option, full spill containment system and in-line fuel heater to minus 40F/C (both available on premium model). Additional features on the premium model include an upgraded pump and an upgraded trailer jack.
The E 1250 is expandable and designed for reliable performance and trouble-free starts for up to 115 hours of run time at more than 87 percent efficiency and with accessories can thaw up to 3,750 sq. ft. (348 sq m) of frozen ground at an average rate of 1 ft. (.3 m) deep per day, cure up to 8,750 sq. of concrete, prevent frost up to 11,250 sq. or provide up to 203,600 cu. ft. of dry heat.
Today's top stories