All Equipment Category Specs ↠ Combination Rollers ↠ Hamm HD+ 80i VT

Hamm HD+ 80i VT Combination Roller

Category: Combination Rollers (See all Combination Rollers for sale)
Manufacturer: Hamm (See all Hamm Equipment for sale)
Model: HD+ 80i VT (See all Hamm HD+ 80i VT for sale)

Dimensions

Ground Clearance	29.6 in (75 cm)
Height - Top of Cab	9.5 ft (3 m)
Overall Length	176.4 in (448 cm)
Overall Width	6 ft (2 m)
Turning Radius - Inside	166 in (422 cm)
Wheelbase	131.5 in (334 cm)
Width over tyres	63.6 in (162 cm)

Drum

Centrifugal Force - High	19558.4 lbs (8,872 kg)
Centrifugal Force - Low	15511.9 lbs (7,036 kg)
Drum Diameter	44.9 in (114 cm)
Drum Width	66 in (168 cm)
Nominal Amplitude - High	0.1 in (0 cm)
Nominal Amplitude - Low	0.1 in (0 cm)
Static Linear Load	131.1 lbs/in
Tangential amplitude , rear - 1	0.1 in (0 cm)
Vibration Frequency	48/58 hz (2,880 vpm)
Vibration Frequency 1	48 hz (2,880 vpm)
Vibration Frequency 2	58 hz (3,480 vpm)

Engine

Emission Tier Level	EPA Tier 4
Engine Make	DEUTZ
Engine Model	TCD 2.9 L4
Gross Power	74.3 hp (55 kw)
Make	Deutz
Net Power	74.2 hp (55 kw)
Number of Cylinders	4
Power Measured @	2500 rpm

Operating Specifications

Fuel Capacity	31.8 gal (120 l)
Max Speed	3.8 mph (6 kph)
Operating Weight	21693.5 lbs (9,840 kg)
Operating weight Cabin	16270.2 lbs (7,380 kg)
Operating weight ROPS	15895.4 lbs (7,210 kg)
Oscillating angle	10 °
Water Spray Tank Fluid Capacity	185 gal (700 l)

Tires

11.00-20

See all Combination Rollers for sale

See all Hamm Equipment for sale

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.