Superior Industries Inc. said its engineers cut major setup time required to transition a swing axle style TeleStacker conveyor from transport to radial positions. The new XTP axle shifts from road to radial mode in just five to ten minutes. That is compared to 45 to 60 minutes for the original model, a design still common to competitive swing axle telescopic conveyors, according to the manufacturer.

Three key design features characterize the next generation swing axle assembly. First, to engage the stacker’s power travel, chains and sprockets are replaced with a pre-installed t-handle mechanism. While the chain and sprocket arrangement takes up to 30 minutes to install, requires maintenance and can be tricky to guard, the new power travel system takes just seconds to engage and needs no maintenance or guarding.

Secondly, the new axle design requires fewer link arms during both transport and operational modes. This modification again helps to reduce setup time. Lastly, the addition of a pivoting walking beam allows for true wheel alignment during radial travel. Poor alignment results in tire scuffing and can even cause a conveyor’s feed point to shift out of position.

The 40-year-old conveyor manufacturer produced a video to help show the new design in an everyday working environment at http://superior-ind.com.

First generation swing axle models can be retrofitted with the new XTP axle. The company also builds models for highly portable applications, extreme capacities, highly mobile terminals and applications that require tracked travel capabilities.

For more information, call 320/589-2406 or visit www.superior-ind.com.

Today's top stories

New Bridges Part of Iowa's $114M Madison Avenue Project

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

SAKAI Achieves Record Sales, Production

Takeuchi Recognizes Top Dealers at 2024 Dealer Summit

Tennessee's Pugmill Systems LLC Expands Its Product Offerings to Include Concrete Plants

ASCENDUM Machinery Opens New Savannah, Ga., Facility

FEMA Repaying Vermont $22M for Cleanup Costs Due to July 2023 Floods