Neal

Neal Manufacturing has upgraded its DA-350 Dual Applicator sealcoating machine. The three-wheeled, self-propelled unit has a 350-gal. (1,325 L) tank and allows contractors to apply sealcoat with squeegee and spray systems. Neal added a high-powered blower to the front of the DA-350 to help users quickly and easily prepare the surface for sealcoat application.

The 1,500-gal. (5,678 L) capacity of the ESSP 1500S skid-mounted sealcoating machine from Neal Manufacturing reduces the time associated with refilling the tank on large projects and the number of trips a contractor needs to make to the sealer manufacturer or distributor.

The 1,500-gal. (5,678 L) capacity of the ESSP 1500S skid-mounted sealcoating machine from Neal Manufacturing reduces the time associated with refilling the tank on large projects and the number of trips a contractor needs to make to the sealer manufacturer or distributor.

Neal Manufacturing, a division of Blastcrete Equipment Company and a manufacturer of sealcoating equipment, gives commercial contractors increased efficiency with its heavy-duty ESSP 550T and 750T trailer-mounted machines. The machines feature electric super sand pump (ESSP) systems that produce as much as 100 gpm (378.5 Lpm) for up to 50 percent faster coverage than diaphragm pumps.

The DA-350 dual applicator by Neal Manufacturing, a division of Blastcrete Equipment Company, is a highly mobile machine that provides two powerful ways to apply sealcoat — the spray method and squeegee method — in one machine. The unit’s versatility, combined with its ability to apply high volumes of material quickly, make it ideal for contractors who coat large asphalt areas such as parking lots, according to the manufacturer.

Neal Manufacturing based in Villa Rica, Ga., recently became an authorized distributor for the full line of Mauldin pavers, as well as Bomag pavers, milling machines, and two models of asphalt compactors. The company provides sales, service, parts and rentals for these lines in Georgia, Alabama and Tennessee.

Neal Manufacturing Company of Villa Rica, GA, has acquired a 7,622-square-meter (82,050 sq. ft.) facility in Carrollton, GA, which will house both the manufacturing and office operations for its asphalt paving, sealcoating and hot tack equipment business. In operation since 1977, Neal Manufacturing currently operates out of its Villa Rica location, and has seen its business grow steadily to the point where the company has outgrown its present facilities. “Over the last few years our production capability has been restricted due to the limited size of our current manufacturing plant,” said Harold Neal, president of Neal Manufacturing.

The 1,500-gal. (5,678 L) capacity of the 1500S skid-mounted sealcoating machine from Neal Manufacturing reduces the time associated with refilling the tank on large projects and the number of trips a contractor needs to make to the sealer manufacturer or distributor.