Our Main Office
Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
Fri March 16, 2007 - National Edition
Komatsu America Corp. has introduced the PC228USLC-3 short tail swing excavator with Tier III engine. The new machine has a flywheel horsepower of 148 hp (110 kW), an operating weight between 49,900 to 51,110 lbs. (22,634 to 23,183 kg) and a bucket capacity range of .66 to 1.57 cu. yds. (.5 to 1.2 cu. m).
Occupying a 180 degree swing width of 13 ft. 1 in. (4 m) with a loaded bucket, as well as a large counterweight that requires no additional clearance, the PC228USLC-3 is practical for working in confined areas such as roadways, bridges, urban areas or anywhere space in limited.
The PC228USLC-3 is equipped with Komtrax technology, which sends machine operating information to a secure Web site utilizing wireless technology. Data such as operating hours, location, cautions and maintenance alerts are relayed to the web application for analysis.
The Komtrax fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor, and provides a wealth of other information to drive business efficiently and productively.
Low Emissions Engine
The excavator is equipped with the newly developed, powerful, low emission Komatsu SAA6D107E-1 electronically controlled common rail type engine that reduces NOx emissions by 29 percent with an accurate multi-staged fuel injection system. The engine meets EPA Tier III and EU stage 3A emission regulations without sacrificing power or machine productivity, according to the manufacturer.
The PC228USLC-3 is equipped with working modes designed to match engine speed, pump flow and system pressure to specific application requirements, giving the operator flexibility to match equipment performance to the job at hand.
Economy mode now features four level settings, allowing the operator to achieve required production with the lowest possible fuel consumption. In the power mode the machine is set for maximum horsepower operation. Even if the pressure varies with the pump load, the engine speed is properly controlled, and the engine is always used near the rated output point. This mode is suitable for large production and heavy-load work since the engine output is fully utilized.
The lifting mode gives the operator 7 percent more lifting force on the boom, making it ideal for lifting heavy pipe or precise control with heavier loads. A breaker mode is now provided as an independent function that allows for maximum production and power.
Maintenance Made Easy
Equipped with Komatsu’s Equipment Management Monitoring System (EMMS), the PC228USLC-3 was designed to reduce downtime. EMMS continually monitors all critical excavator systems, alerting and guiding the operator should a problem occur. By preventing a small problem from becoming a major service issue, EMMS contributes to operating cost reduction.
The system also tracks the preventive maintenance schedule, providing on-board warning as required maintenance becomes due. Error codes and troubleshooting assistance is available at the EMMS display, which minimizes diagnosis and repair time.
Spacious, Quiet Cab
Komatsu’s low-noise cab design uses a pressurized highly rigid cab and air filter to reduce noise and prevent external dust from entering the cab. The cab rests on fully viscous damping mounts, minimizing vibration and noise from the machine body and reducing operator fatigue. An electronic engine, highly rigid cylinder block, low-noise muffler design and optimal arrangement of sound absorbing materials throughout the engine compartment further reduce dynamic noise.
For more information, visit www.komatsuamerica.com.
Case Energizes Compact Equipment Market With Launch of Two Electrified Mini Excavators, D Series Mini Excavators