Preserving Arlington Memorial Bridge

Linder Welcomes Customers to New Concord Facility

Mon May 06, 2019 - Southeast Edition #10
CEG



Linder Industrial Machinery held a grand opening celebration for its new facility in Concord, N.C., on April 18..

The 44,000-sq.-ft. building is equipped with 12 service bays; an open floor plan and work stations; and an efficient, high-tech parts and warehouse system.

"This new location will afford us the opportunity to build upon the growth Linder has achieved in the market while enhancing our ability to provide the full-service support our customers need," President and CEO John Coughlin said.

The new facility is centrally located at 5733 Davidson Hwy. in Concord.

CEG

The ribbon is cut to officially open the 18 -acre, 44,000-sq.-ft. facility.
The ribbon is cut to officially open the 18 -acre, 44,000-sq.-ft. facility.

Gary Witherspoon of Sanders Utility Construction Co. looks over the Carlson pavers and Hamm compaction products.
Gary Witherspoon of Sanders Utility Construction Co. looks over the Carlson pavers and Hamm compaction products.

Located at 5733 Davidson Hwy. in Concord, N.C., the 44,000-sq.-ft. building is equipped with 12 service bays and a modern, open floor plan and work stations.
Located at 5733 Davidson Hwy. in Concord, N.C., the 44,000-sq.-ft. building is equipped with 12 service bays and a modern, open floor plan and work stations.

(L-R) are Chuji “Chewy” Nishio, Komatsu America; Hideyuki “Hank” Takatsuki, president, Komatsu America; Kenichi “Kevin” Hyuga, Sumitomo Corporation of Americas; Masaki Hieda, vice president planning and development, Linder; and Rob Leavel, regional vice president eastern North Carolina, Linder.
(L-R) are Chuji “Chewy” Nishio, Komatsu America; Hideyuki “Hank” Takatsuki, president, Komatsu America; Kenichi “Kevin” Hyuga, Sumitomo Corporation of Americas; Masaki Hieda, vice president planning and development, Linder; and Rob Leavel, regional vice president eastern North Carolina, Linder.

(L-R): Adam Cockerham, Linder Industrial Machinery, shows the shop area to Tam Wright and Tommy Rawe of C.K. Contractors & Development, Kings Mountain, N.C
(L-R): Adam Cockerham, Linder Industrial Machinery, shows the shop area to Tam Wright and Tommy Rawe of C.K. Contractors & Development, Kings Mountain, N.C

(L-R) are Brian Collins, Wingate Excavating in Wingate, N.C.; Mark Brantley, Seth Farthing and Chris Helms of Centerline Contractors in Monroe, N.C.; Bill Cross, Linder area salesman, and John Coughlin of Linder Industrial Machinery.
(L-R) are Brian Collins, Wingate Excavating in Wingate, N.C.; Mark Brantley, Seth Farthing and Chris Helms of Centerline Contractors in Monroe, N.C.; Bill Cross, Linder area salesman, and John Coughlin of Linder Industrial Machinery.

(L-R) are Locke Rowe, Smith Rowe in Mount Airy, N.C.; Conrad Graham, retired from Linder; Kevin Thomas of Lynn Thomas Grading in Polkton, N.C.; and Chris Wilkes and Michael Moore of Linder.
(L-R) are Locke Rowe, Smith Rowe in Mount Airy, N.C.; Conrad Graham, retired from Linder; Kevin Thomas of Lynn Thomas Grading in Polkton, N.C.; and Chris Wilkes and Michael Moore of Linder.

(L-R) are Greg Tucker, J.T. Russell & Sons in Albemarle, N.C.; Richard Rizzo, Thompson Arthur in Greensboro, N.C.; Todd Huneycutt, also of J.T. Russell & Sons; and Chris Wilkes and Sam Light of Linder.
(L-R) are Greg Tucker, J.T. Russell & Sons in Albemarle, N.C.; Richard Rizzo, Thompson Arthur in Greensboro, N.C.; Todd Huneycutt, also of J.T. Russell & Sons; and Chris Wilkes and Sam Light of Linder.

(L-R) are Bill Jacobs, Komatsu; Steve Sharpe and Scott Jones of Carolina’s Contracting in Charlotte, N.C. and Bill Cross, area salesman of Linder.
(L-R) are Bill Jacobs, Komatsu; Steve Sharpe and Scott Jones of Carolina’s Contracting in Charlotte, N.C. and Bill Cross, area salesman of Linder.

Discussing the Wirtgen products (L-R) are Earl Person and Scott McAteer of Linder; and Tommy Vaughn and Brandon Hill of Propst Construction in Concord, N.C.
Discussing the Wirtgen products (L-R) are Earl Person and Scott McAteer of Linder; and Tommy Vaughn and Brandon Hill of Propst Construction in Concord, N.C.

Talking Excavators are David Vendemia (L) of Linder and Donald Prater of Property Service Group in Concord, N.C.
Talking Excavators are David Vendemia (L) of Linder and Donald Prater of Property Service Group in Concord, N.C.