Sell Your Equipment  /  Dealer Login  /  Create Account

Redesign Helps Roadtec Enhance Its SX-7 Soil Stabilizer

Fri October 29, 2010 - Midwest Edition
Construction Equipment Guide

The redesigned SX-7 provides power, speed and improved visibility.
The redesigned SX-7 provides power, speed and improved visibility.

Roadtec’s 700 hp (522 kW) soil stabilizer/reclaimer has undergone a transformation with many refinements over the past year.

The changes in the body of the machine are mostly related to maximizing visibility. Visibility is tricky with any large construction machine, but Roadtec has redesigned the front and rear body of the machine so that visibility is dramatically improved, according to the manufacturer.

The cab is optional and can slide right or left, past the frame of the machine

With the SX-7 water and emulsion are handled by one system. Any single nozzle, or set of nozzles in the spray bar can be turned off individually to precisely control how much liquid material is put down.

The new Roadnet Central Control and Diagnostic System has an easily navigable screen to give the operator feedback on virtually every function of the machine. Additionally, trouble shooting screens for all systems can be accessed with the touch of a button.

With its variable volume cutter, the drum can be moved up or down in the housing on the fly. To create more mixing space, the drum is moved down. If sizing of the material is critical, the drum can be moved up closer to the housing for the desired result.

The SX-7 is big, but nimble with its Zero Turn radius. The machine can be entirely turned around in one spot.

Service accessibility was important in the design of the machine. A person can stand up in the cutter housing to change out tools. Engine components and hydraulics are fully accessible.

Roadtec VP of sales John Irvine commented, “We are proud to be offering our customers this machine, which we feel is more productive than any other comparable stabilizer out there. This gives our customers the added benefit of reducing fuel consumption, even with a machine this big, because they will have to run it for much shorter periods to get the job done.”

True maximum cut depth of the SX-7 is 21 in. (53 cm) and the standard cutting width is 8 ft. 5 in. (2.5 m).

Today's top stories

Wildish Construction Replacing 70-Year-Old Bridge in McMinnville

E.B. 'Ed' Abel Jr. Passes Away

Tips for Selecting the Best Modern Fuel Storage Solution

Connecticut DOT to Make Repairs Following Tropical Storm Ida

USDOT to Provide $628M for I-405 Construction Project

Ritchie Bros. to Host Inside Edge Online Construction Panel

Kubota Tractor Corporation Closes Escrow, Acquires Land in Elk Grove, California, for New Western Division Operations

Through Economic Highs, Lows, Crestview Adapts, Continues to Grow


ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo