List Your Equipment  /  Dealer Login  /  Create Account

Talbert 65-Ton Spread-Axle Trailer With E2Nitro

The 65-ton (59 t) spread-axle trailer outfitted with the E2Nitro nitrogen-assisted equalizing system by Talbert Manufacturing provides haulers the versatility they need.

Mon November 03, 2014 - National Edition
Construction Equipment Guide


The 65-ton (59 t) spread-axle trailer outfitted with the E2Nitro nitrogen-assisted equalizing system by Talbert Manufacturing provides haulers the versatility they need to switch axle configurations and comply with individual state road regulations. This trailer also can be operated in a 70-ton (63.5 t) close-coupled configuration.

Haulers can use the 65SA with a close-coupled fourth axle for a 70-ton rating or a spread-axle configuration for a 65-ton rating, and the trailer’s empty weight is lighter compared to West Coast-style trailers. The trailer’s East Coast-style E2Nitro spreader features a bearing pivot and pivot lockout for backing the trailer. In addition, the E2Nitro operator can hydraulically set axle loads and keep them there in all terrains. It also allows for a 14-ft. 1-in. (4.3 m) spread between the third and fourth axle, which is ideal for haulers traveling into states that require that spread.

The E2Nitro system articulates left and right and uses nitrogen to equalize the up and down movement to provide proportionate weight distribution in each axle grouping. Through a combination of hydraulic and nitrogen equalization, the E2Nitro absorbs hauling and loading shocks and provides a greater range of suspension movement for reduced stress and a smoother ride. The system also acts as a hydraulic shim point between trailer and spreader. The E2Nitro also incorporates two-speed dual landing gear for greater stability when it is disconnected from the trailer. Finally, the 65SA with the E2Nitro makes movement on job sites easier because operators can lift rear axles when backing up or turning around.

The Talbert 65SA features a 70-in. (178 cm), flip-up gooseneck extension to achieve a 190-in. (482 cm) radius. The unit also offers removable kingpin stations for 120- and 108-in. (305 and 274 cm) swing radiuses, a 30-ft. (9 m) deck length and an 8-ft. 6-in. (2.6 m) deck width. And, like all its trailers, Talbert manufactures the 65SA with heavy-duty T-1, 100,000-psi minimum yield steel. Optional deck lengths, deck types, and widths of 9, 9 ft. 6 in., and 10 ft. (2.7, 2.9 and 3 m) also are available..

The standard 65SA model has three different capacity ratings: 65 tons (59 t) in a 15-ft. (4.6 m), 2-point rigid load base as a 3+2 spread-axle trailer with 30 ft. (9 m) of deck; 65 tons in a 30-ft., 2-point rigid load base as a 3+2 spread-axle trailer with the addition of an 8-ft. (2.4 m) deck insert (38 ft. [11.6 m] overall); and 70 tons (63.5 t) in a 16-ft. (4.8 m), 2-point rigid load base as a 4-axle trailer with 30 ft. of deck.

For more information, call 800/348-5232 or visit www.talbertmfg.com.




Today's top stories

DOT Pauses 'Buy America' Provision to Provide Relief to Already Strained Industry

Pennsylvania Contractor Takes Delivery of First Doosan DD100 Dozer

Wirtgen Slipform Pavers Bring Numerous Innovations, World Premiere to bauma 2022

Granite Tackles California Congestion Issue With $700M '101 in Motion' Project

Blanchard Machinery CEO, President Joe Blanchard Passes at Age 60

Alabama's Bank Independent to Build $60M, Four-Story Muscle Shoals Complex

Hitachi's Sam Shelton Retires After 27 Years With Company

Former Owner of Highway Equipment Company Dies, 84


 






ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo
39.04690 \\ -77.49030 \\ Ashburn \\ VA