Vermeer Plants Hit by Tornado

Terex Bid-Well Celebrates 50 Years of Innovation, Service

Fri August 05, 2011 - Midwest Edition
CEG



Until 1961, bridge contractors faced a number of limitations when paving bridge decks. Using screed boards equal in length to the distance between the bridge abutment and first pier, contractors were confined to paving only this distance at one time.

“This also restricted bridge designs and the length of pier segments as there was a limit to girder camber with this method of paving,” said Larry Eben, Southeastern regional sales manager of Terex Bid-Well.

In 1961, an upstart company named Bid-Well developed a new method for paving decks, which changed the face of bridge paving.

“Tex” Bidwell, a bridge contractor from Rapid City, S.D., had an idea for paving the deck transversely, rather than the then industry-standard longitudinally. He developed this concept with a Canton, S.D., machine shop operator, Murray Rowe, and thus began the historical roots of today’s Terex Bid-Well.

“With longitudinal paving, contractors would see transfer deflection from the girders after the pour, which resulted in an uneven ride. So Tex’s idea was driven more to improve ride and gradeability,” said Eben.

The first Terex Bid-Well paver design included an oscillating strike-off pan riding along a 48-in. (122 cm) deep truss frame. These pavers increased deck paving widths up to 60 ft. (18.3 m) wide. The width was limited only by the electrical cords that powered the oscillating pan, augers and machine movement.

This revolutionary method for paving bridge decks ushered in a new era of efficiency and quality for contractors. Within a few years, demand for these new transverse pavers grew, taxing the capacity of the small company. So in 1969, Rowe sold the company to the CMI Corporation (today Terex Roadbuilding), giving the company capital to expand and evolve the paver designs. Rowe would remain as president of Bid-Well, a position he held for more than 35 years.

Evolving Line

As bridge designs evolved due to the flexibility these new transverse pavers offered, so too did the design of the Terex Bid-Well paver. As bridge widths expanded in the early 1970s, the pavers transitioned from electric to hydraulic operation. This eliminated the electric cord limitations and expanded the machine’s paving capabilities beyond 120 ft. (36.6 m), giving contractors increased flexibility.

Roughly this same time, the floating strike-off pan was replaced by a single roller strike off, which was marked by a transition to the BR Series of Terex Bid-Well pavers. A second roller was eventually added to the design, improving paving quality and speed.

Because of the company’s close working relationship with the customer, Terex Bid-Well has introduced a number of design innovations over the years to make the bridge contractor’s job easier. In the mid 1980s, the company developed its Rota-Vibe system. The system delivers up to 5,000 vpm (83.3 Hz) over the rollers’ entire length to reconsolidate the top 2.5 in. (6.3 cm) of concrete, delivering a denser and more uniformly consolidated concrete surface, according to the manufacturer.

Other design advancements pioneered by Terex Bid-Well include:

• A 5-in. (12.7 cm) hydraulic carriage lift, allowing the paving unit to be raised to quickly pass over obstacles and then automatically reset to established grade.

• Swing leg design, which allows the machine to be offset for zero-clearance paving.

• Pivot leg option, which enables the legs to be set to a true vertical position when paving superelevations, removing pressures on the rails.

• A fogging system with nozzles that atomize the water to create a true, light fog.

• Hydraulic crown adjustment that enables contractors to make quick crown changes.

• Optional Skew bar kit that allows the paving carriage to be offset, so it hits the same crown points when the machine is paving at the skew angle.

“Our machine enhancements are only possible due to the close relationship we maintain with the customer,” said Eben. “There’s nothing more motivating than a customer looking you in the eye at the job site and telling you what the paver can and can’t do.”

Customer demand is one of the main reasons why Terex Bid-Well is the manufacturer of the only machine capable of paving bridge decks in excess of 200 ft. (61 m) wide.

“Responding to customer needs remains one of the cornerstones of the business today,” said Rob Drew, site director of Terex Bid-Well and only the fourth leader in the company’s history.

Responsiveness has led to other bridge paver designs over the years. In addition to today’s 4800 paver, which uses the same 48 in. truss depth as the original paver, Terex Bid-Well offers contractor 3600 and 2450 pavers, featuring 36-in. (91.4 cm) and 24-in. (61 cm) truss depths respectively. These were added to the product line to meet customer demand of those contractors who did not pave deck widths in excess of 100 ft. (30.5 m).

This also has led to product development reaching beyond bridges. Using the foundation of the original 48-in. truss frame depth, the Terex Bid-Well 7000 paver was developed to pave canals and slopes. This flexible model allows contractors to pave full width (up to 84-ft), half-width trapezoidal canals and straight slopes with up to 45 degree angles.

The need for additional weight and special features for airport and highway paving resulted in the development of the Terex Bid-Well 5000, 6000 and 6500 Series pavers.

“It was actually an airport application that led to the development of our Rota-Vibe system,” said Eben. “Today’s airport and roadway pavers are built with higher horsepower and weight and features specifically designed to meet strict quality specifications when paving airports.”

In 2001, Terex Corporation purchased the CMI Corporation, and Terex Bid-Well became part of the Terex Roadbuilding group. Terex has retained the brand name, and today the company is known as Terex Bid-Well.

Over the past 50 years, Terex Bid-Well has remained a central figure in the Canton, S.D., community. The company has retained and built around its original Main Street machine shop location. Several company employees are on the volunteer Canton fire department, and “when Jack Lease [former General Manager of Terex Bid-Well] was service manager, he was the fire chief,” said Dean Johnson, service manager of Terex Bid-Well. Through the company’s service schools, held four times a year in Canton, Terex Bid-Well has paved a number of parking lots in the community free of charge.

For more information, visit www.terex.com.