Tramac Adds V1800 to Heavy-Range Hydraulic Breaker Line

Fri June 12, 2009 - National Edition

Tramac’s V1800 is the newest addition to its line of heavy-range hydraulic breakers.

The V1800 is for carriers from 44,100 to 77,200 lbs. (20,000 to 35,017 kg) and has an operating weight of 3,913 lbs. (1,775 kg). With an operating pressure of 2,394 psi (165 bar), the V1800 has a flow range of 37 to 58 gpm (140 to 220 Lpm). This hydraulic breaker is rated at an impact energy class of 6,000 ft.-lbs. and has an impact frequency range of 310 to 500 blows per minute. The tool diameter is 5.5 in. (14 cm).

A one-piece bushing is one of the features incorporated into the V1800. The principal wear parts, including the bushing, are field-replaceable without dismounting the breaker from the carrier or removing any tie rods. Up to 2.5 gpm (9.5 Lpm) can be diverted through the integrated flow control to protect the breaker from carrier overflow. A high back-pressure tolerance of 363 psi (25 bar) allows the V1800 to be installed on a wide range of carriers.

As with all Tramac heavy-range breakers, the V1800 maximizes productivity and reduces the transfer of potentially damaging energy back to the carrier with variable-speed breaker technology. This technology senses changes in material hardness and automatically adjusts the breaker to the optimal combination of impact energy and striking rate. Additionally, an energy recovery system recycles recoil energy and adds it to the next blow, according to the manufacturer.

Maintenance for the Tramac heavy-range breaker line is minimal due to a blank fire protection feature that prevents metal-to-metal contact that can damage a hammer. The heavy-duty, abrasion-resistant cradle also protects the hammer and its internal components from damage and excessive wear. The cradle also is silenced to reduce noise on the job site.

For more information, visit