List Your Equipment  /  Dealer Login
This machine has been sold or is not currently for sale.

Caterpillar 279D



MACHINE SOLD



Machine Info:

Hours:3850
Serial Number:GTL04477
Machine Location:INDIANAPOLIS, IN
More Information:https://catused.com/cu/10115030

Description:

2 Speed Travel, Air Conditioner, Auxiliary Hydraulics Flow - High Flow, Bucket, Coupler Type - Hydraulic, Heater / Defroster, Lighting, Online Owner's Manual , Pilot Control, ROPS - Enclosed, Self Leveling, Ultra Low Sulfur Diesel Fuel

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
SAFETY ITEMS
ROPSYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
OPERATOR STATION
Back Up AlarmYes
ROPS Certification PlateYes
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
Batteries / CablesGood
LightingGood
StarterGood
WiringGood
TANDEMS/GEARS/BEARINGS/CHAINS
Lines / LinkagesGood
Operating ConditionGood
Torsion AxlesFair
Travel ControlsGood
Travel MotorsGood
Travel PumpsGood
HYDRAULICS
Leaks - HYDRAULICSNo
BUCKET
Bucket LinkageFair
Bucket SidesGood
Loader FrameGood
Loader Pins & BushingsGood
Quick CouplerGood
UNDERCARRIAGE
Leaks - HYDRAULICS30% worn
Leaks - HYDRAULICS22/32nds


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Air Conditioning System
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Cab
FOPSISO 3449:2005 Level I
FOPS Level IIISO 3449:2005 Level II
ROPSISO 3471:2008
Dimensions
Bucket Pin Height - Carry Position7.8 in  ( 20 cm )
Bucket Pin Height - Maximum Lift10.5 ft  ( 3 m )
Clearance at Max Lift and Dump8.2 ft  ( 3 m )
Clearance at Maximum Lift and Dump97.8 in  ( 248 cm )
Departure Angle32 deg
Dump angle39 deg
Ground Clearance8.9 in  ( 23 cm )
Height - Top of Cab7.0 ft  ( 2 m )
Length - Track on Ground64.2 in  ( 163 cm )
Length - with Bucket12.2 ft  ( 4 m )
Length - With Bucket on Ground146.2 in  ( 371 cm )
Maximum Dump Angle39 deg
Maximum Overall Height159.5 in  ( 405 cm )
Maximum Reach - With Arms Parallel to Ground54.0 in  ( 137 cm )
Overall Height13.2 ft  ( 4 m )
Overall Length - Track83.8 in  ( 213 cm )
Overall Track Length7.0 ft  ( 2 m )
Rack Back Angle - Maximum Height84 deg
Reach - Maximum Lift/Dump22.6 in  ( 57 cm )
Reach at Max Lift and Dump1.9 ft  ( 1 m )
Turning Radius from Center - Bucket88.8 in  ( 226 cm )
Turning Radius from Center - Coupler55.5 in  ( 141 cm )
Vehicle Width (400 mm/15.7 in tracks)76.0 in  ( 193 cm )
Vehicle Width (450 mm/17.7 in tracks)78.0 in  ( 198 cm )
Width Over Tracks6.4 ft  ( 2 m )
Engine
Bore3.7 in  ( 9 cm )
Displacement203.0 cu in  ( 3,327 cu cm )
Engine MakeDIT
Engine ModelCat C3.3B DIT (turbo)
Gross Power74.3 hp  ( 55 kw )
Gross Power - SAE J199574.3 hp  ( 55 kw )
Net Power72.9 hp  ( 54 kw )
Net Power - ISO 924973.7 hp  ( 55 kw )
Net Power - SAE 134972.9 hp  ( 54 kw )
Peak Torque195.5 lbs ft  ( 265 nm )
Peak Torque - 1,500 rpm - SAE J1995195.0 ft  ( 59 m )
Stroke4.7 in  ( 12 cm )
Torque Measured @1,500.0 rpm
Hydraulic System
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76.0 hp  ( 57 kw )
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32.0 gpm  ( 121 lpm )
Hydraulic Flow - Standard - Hydraulic Power (Calculated)44.0 hp  ( 33 kw )
Hydraulic Flow - Standard - Loader Hydraulic Pressure3,335.0 psi
Pump Flow22.8 gpm  ( 86 lpm )
Relief Valve Pressure3,335.9 psi
Loader
Breakout Force7,284.1 lbs  ( 3,304 kg )
Operating Load Rating 2,055.0 lbs  ( 932 kg )
Operating Width 76.0 in  ( 193 cm )
Tipping Load5,871.0 lbs  ( 2,663 kg )
Noise Level
Inside Cab*83 dB(A)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**103 dB(A)
Operating Specifications
Alternator Supplied Amperage80 amps
Breakout Force - Tilt Cylinder7,285.0 lbs  ( 3,304 kg )
Cooling System Fluid Capacity3.7 gal  ( 14 l )
Fuel Capacity24.9 gal  ( 94 l )
Ground Contact Area - With 400 mm/15.7 in Track2,015.0 cu in  ( 33,020 cu cm )
Ground Contact Area - With 450 mm/17.7 in Track2,272.0 cu in  ( 37,231 cu cm )
Ground Pressure - With 400 mm/15.7 in Track4.9 psi
Ground Pressure - With 450 mm/17.7 in Track4.4 psi
Hydraulic System Fluid Capacity13.8 gal  ( 52 l )
Max Speed - high range7.1 mph  ( 11 kph )
Max Speed - low range4.5 mph  ( 7 kph )
Operating Voltage12.0 volts
Operating Weight9,892.2 lbs  ( 4,487 kg )
Rated Operating Capacities - 35% Tipping Load2,055.0 lbs  ( 932 kg )
Rated Operating Capacities - 50% Tipping Load2,935.0 lbs  ( 1,331 kg )
Rated Operating Capacity with Optional Counterweight3,185.0 lbs  ( 1,445 kg )
Tipping Load5,870.0 lbs  ( 2,663 kg )
Power Train
Travel Speed - Forward or Reverse - One Speed4.5 mph  ( 7 kph )
Travel Speed - Forward or Reverse - Two Speed7.0 mph  ( 11 kph )
Service Refill Capacities
Cooling System3.7 gal  ( 14 l )
Engine Crankcase3.0 gal  ( 11 l )
Fuel Tank24.8 gal  ( 94 l )
Hydraulic System13.7 gal  ( 52 l )
Hydraulic Tank10.3 gal  ( 39 l )
Undercarriage
Ground Contact Area2,015.1 cu in  ( 33,022 cu cm )
Ground Pressure5.0 psi
Length of Track on Ground5.4 ft  ( 2 m )
Weights
Operating Weight9,893.0 lbs  ( 4,487 kg )

Dealer Contact Info:

MacAllister Machinery Co., Inc.

Fax: 317-860-3310



Contact: Used Equipment Team

Click for Phone Number


veritread button




aggregateequipmentguide-logo agriculturalequipmentguide-logo craneequipmentguide-logo forestryequipmentguide-logo truckandtrailerguide-logo
39.96250 \\ -83.00610 \\ Columbus \\ PA