2009 Caterpillar D6T For Sale in Indianapolis, IN



For Sale: $85,000.00 USD


MacAllister Machinery Co., Inc.

https://www.macallister.com


Contact: Used Equipment Team

Click for Phone Number

Machine Info:

Hours:7535
Serial Number:KJL01032
Machine Location:INDIANAPOLIS, IN 46219

Description:

AIR CONDITIONERAM FM CD RADIOAUXILIARY HYDRAULICSBLADE, SINGLE ANGLE TILTDIFF STEERDRAWBARENGINE ENCLOSURESEROPSFIRE SUPRESSION SYSTEMLGPLIGHTING

Machine Details:

GENERAL APPEARANCE
BumperGood
Cab or CanopyGood
Draw BarGood
FendersGood
Fuel TankGood
Grab IronsGood
HoodGood
Main Frame WeldsGood
PaintFair - Machine has some corrosion throughout.
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Air ConditionerGood
Dash ConsoleGood
GaugesGood
Glass/MirrorsGood
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersGood
ENGINE
Blow ByNo
KnockingNo
Oil LeaksYes - Minor leaks in filter base area.
Water in OilNo
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Batteries / CablesGood
StarterGood
TRANSMISSION
Leaks - TRANSMISSIONYes - Belly pans are wet with oil.
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Differential SteerGood
Differential Steering ControlsGood
Steering Operating ConditionGood
HYDRAULICS
Leaks - HYDRAULICSYes - Leaks at tilt cylinder lines and in valve/ tank area.
Control Linkage - HYDRAULICSGood
Lift CylindersGood
Overall Operating ConditionGood
Tilt CylinderGood
BLADE
Notes - BLADE - Blade is loose throughout.
Cutting Edge & BitsGood
Face / MoldboardGood
PinsFair
Push ArmGood
TrunnionsFair
UNDERCARRIAGE
Notes - UNDERCARRIAGE - Undercarriage is ITR. Bushings show 10-15% wear and links show 30% wear using CAT specs.
Pivot Shaft - Right pivot shaft appears to be seeping.
Track Frame - LeftGood
Track Frame - RightGood
FINAL DRIVES
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - 500 hr. service done at 7,535 hrs.
comment 2 - New seat belt installed.
comment 3 - Installed batteries.


Specs from the manufacturer:

Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes23 in (58 cm)
Length - Track on Ground113 in (287 cm)
Engine
Bore4 in (11 cm)
Displacement537 cu in (0 m)
Engine ModelCat C9 ACERT
Flywheel Power200 hp (149 kw)
Gross Power213 hp (159 kw)
MakeCat
ModelC9 ACERT
Net Power185 hp (138 kw)
Net Power - Caterpillar185 hp (138 kw)
Net Power - EU 80/1269185 hp (138 kw)
Net Power - ISO 9249185 hp (138 kw)
Net Power - SAE J1349183 hp (136 kw)
Stroke6 in (15 cm)
Hydraulic Controls - Pump
Ripper Cylinder Flow50 gal/min (189 l/min)
Tilt Cylinder Flow21 gal/min (80 l/min)
Operating Specifications
Operating Weight40,550 lbs (18,393 kg)
Ripper
Beam Cross Section216 254 mm 8.5 10 in
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole20 in (51 cm)
Maximum Penetration20 in (50 cm)
Maximum Penetration Force14,557 lbs (6,603 kg)
Number of Pockets3
Overall Beam Width87 in (221 cm)
Pry-Out Force20,137 lbs (9,134 kg)
Ripper TypeFixed Parallelogram
Weight - Each Additional Shank163 lbs (74 kg)
Weight - With One Shank3,606 lbs (1,636 kg)
Service Refill Capacities
Cooling System20 gal (77 l)
Engine Crankcase7 gal (28 l)
Final Drive - Each4 gal (14 l)
Fuel Tank112 gal (424 l)
Hydraulic Tank14 gal (51 l)
Pivot Shaft Compartment1 gal (5 l)
Power Train39 gal (146 l)
Roller Frames - Each7 gal (25 l)
Standards
BrakesBrakes meet criterion SAE J/ISO 10265 MAR99
Transmission
2 Forward3 mph (5 kph)
2 Reverse4 mph (7 kph)
3 Forward5 mph (9 kph)
3 Reverse7 mph (11 kph)
3.5 Reverse9 mph (15 kph)
Undercarriage
Ground Pressure9 psi
Grouser Height3 in (7 cm)
Winch
Drum Capacity - 22 mm (0.88 in)290 ft in (737 cm)
Drum Capacity - 25 mm (1.0 in)220 ft (67 m)
Drum Capacity - 29 mm (1.13 in)220 ft in (559 cm)
Drum Diameter10 in (25 cm)
Drum Width13 in (33 cm)
Ferrule Size (O.D. Length)54 67 mm 2.10 2.63 in
Flange Diameter20 in (50 cm)
Increased Tractor Length - LGP16 in (40 cm)
Increased Tractor Length - STD20 in (52 cm)
Increased Tractor Length - XL/XW20 in (52 cm)
Oil Capacity18 gal (67 l)
Weight2,600 lbs (1,179 kg)
Winch and Bracket Length48 in (121 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

MacAllister Machinery Co., Inc.

Fax: 317-860-3310



Contact: Used Equipment Team

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo